Farmhouse Silicone Mold 1618 - Wholesale Supplies Plus
 
$10 off $100 | $25 off $150 | $40 off $200 - Shop Now
 
 
Wholesale Supplies Plus
 
   
 
OUR BRANDS:
 
 

Crafter's Choice™

Farmhouse Silicone Mold 1618

Farmhouse Silicone Mold 1618 Farmhouse Silicone Mold 1618 Farmhouse Silicone Mold 1618
photo icon See customer photos
Pay in 4 interest-free payments on purchases of $30-$1,500 Learn more

Document IconProduct Details

The Farmhouse Silicone Mold creates four rectangular bars of soap. The deep mold is complete with ridges that will bring nice texture to soap and lotion bars!

Common Uses:
Melt & Pour Soap. Cold & Hot Process Soap.

Points of Interest:
Material: Food Grade Silicone
Maximum Product Pour Temp: 500ºF


Helpful Product Information:
Style: Bar Bar Cavities: 4
Avg. Bar Weight: 6.5 oz Bar Depth: 1.5"
Bar Length: 3.25" Bar Width: 2.0625"
Mold Capacity (oz): 26



Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.

Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.

Care:
Hand wash in warm sudsy water.

Product Information:

Brand Crafter's Choice™
Country Of Origin China

CA Prop 65

Documents:

Non-Hazardous Statement Animal Testing Statement

Clipboard IconRecipes & Videos (1)

Question Mark IconQuestions & Answers (3)

Comment IconCustomer Reviews (22)

Photo IconCustomer Photos

Levels IconCharts & Calculators