Long Loaf Silicone Soap Mold 1503 - Wholesale Supplies Plus
 
✨ 20% Off 100s of Spring Scents - Shop Now
 
 
Wholesale Supplies Plus
 
   
 
OUR BRANDS:
 
 

Crafter's Choice™

Long Loaf Silicone Soap Mold 1503


Document IconProduct Details

This is a thick and sturdy silicone loaf mold that weighs nearly 3 lb. on its own. Originally designed to fit as a liner in the Crafter's Choice Wooden Long Loaf Soap Mold (discontinued) or you can use it as a stand alone mold, but will need to support the sides from bowing. The natural color silicone is 1/4" thick on all sides.


Loaf Dimensions: 3 1/8" wide x 19 15/16" long x 3 1/8" deep

Helpful Product Information:
Style: Loaf Mold Capacity (oz): 104
Max Temperature: 500ºF Bar Length: 19.9375"
Bar Width: 3.125" Bar Depth: 3.125"

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap into silicone mold. Allow soap to cool at room temperature until hard. Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the loaf and carefully pull out of the mold. Slice into bars.

Cold Process Soap: Pour soap at trace into mold. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface or cookie sheet and gently push on the bottom of mold until the soap starts to release. Grab hold of the loaf with a gloved hand. Slice into bars and allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Cold Process/Oven Process Soap: Pour soap at trace into the mold. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Slice into bars, and allow soap to cure for 2 to 4 weeks.

Hot Process Soap: Scoop hot process soap into mold. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the loaf and carefully pull out of mold. Slice into bars.

Care:
Hand wash mold in warm, sudsy water.

Product Information:

Brand Crafter's Choice™
Country Of Origin China

CA Prop 65

Documents:

Non-Hazardous Statement Animal Testing Statement

Clipboard IconRecipes & Videos (2)

Question Mark IconQuestions & Answers (17)

Comment IconCustomer Reviews (36)

Photo IconCustomer Photos

Levels IconCharts & Calculators