We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Welcome to the new home for
Elements Bath & BodyRustic EssentualsJust ScentCrafter's ChoiceMake Your Own.buzz
Elements Bath & Body Rustic Essentuals Just Scent Crafter's Choice Make Your Own.buzz
products are now exclusively available on Wholesale Supplies Plus.
This 3 cavity Navy Soap Mold is a round bar mold with the United States Navy Emblem in the center. The Navy emblem is surrounded by the words "DEPARTMENT OF THE NAVY - UNITED STATES OF AMERICA." This mold is great for fundraisers or to honor US Navy seals. More details
This 3 cavity Navy Soap Mold is a round bar mold with the United States Navy Emblem in the center. The Navy emblem is surrounded by the words "DEPARTMENT OF THE NAVY - UNITED STATES OF AMERICA." This mold is great for fundraisers or to honor US Navy seals.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Helpful Product Information:
Material: Plastic
Style: Bar
Bar Depth: 1.125"
Bar Length: 3"
Bar Width: 3"
Max Temperature: 135ºF
Mold Capacity (oz): 12.45
Avg. Bar Weight: 4.15 oz
Bar Cavities: 3
Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Bath Fizzies: Tightly pack bath fizzy mixture into each mold cavity. Allow to harden and dry. (For best results, leave in mold overnight). Flip mold over onto clean surface and gently push bath fizzies out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: This is a great mold. The only problem I have with it is the design in not raised enough to be very noticeable on the finished bar. I tried everything to try and make it stand out from the bar more but nothing worked. I love the mold but just wish the letters as well as the design were more prominent. We live in an area where there is a huge amount of active duty military in all branches, as well as retired military families. JOINT BASE LEWIS McCHORD. These are awesome for my grandchildren's school fundraisers. The only drawback on all of these Milky Way Military designs are they are not very visible in the finished product. Lettering could be deeper in the mold to make the emblems as well as the lettering to stand out better.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Size Of Bar • Design
• Deeper Designs In Mold
Mariann • New York
Date Submitted: 10/01/2017
"Detailing is very light"
COMMENTS: Tried several different methods to get this mold to "pop"- but the detailing/impression is so faint no matter what method I tried (opaque soap, light, dark, clear, dusted with mica etc)it didnt matter. I was hoping this would be a good item for the veterans and active duty that we support.
PRODUCT USED IN: Soap - Melt & Pour
Denise • Arizona
Date Submitted: 08/26/2017
"Beautiful soap mold, but..."
COMMENTS: I was so excited to see military soap molds, but when I made them they were not impressed deep enough to really show the detail unless you look very closely.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• size of soap mold • cost of mold
Show more
Customer Photos
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Crafter's Choice
Elements Bath and Body
Just Scent
Rustic Escentuals
Plastic & Silicone Molds
Featured Collections
Molds By Material
Retired Soap Molds
See Customer Photos
Pay in 4 interest-free payments on purchases of $30-$1,500 
Product Details
Have more questions? See Q&A
Recipes & Videos (0)
Questions & Answers (1)
Customer Reviews (3)
Customer Photos
Charts & Calculators
