Crafter's Choice™ Polysorbate 80

International Nomenclature of Cosmetic Ingredients (INCI):
Polysorbate 80

Common Name Ingredient Listing (FDA Approved):
Polysorbate 80

Directions:
Blend amount as desired into formula.

Recommended use levels: Add at levels of 1-20%.

   • Declaration of Conformity
   • Safety Data Sheet (SDS)
   • Animal Testing Statement

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question

77 Question(s) Shown Below

---

Posted By: CFD   |   July 16, 2022

"I want to try or at least attempt to add a 40% Grain Alcohol Tincture to some Carrier Oils for a beneficial, homemade Moisturizer but want to make sure that both the 40% Alcohol Tincture combines well with the Carrier Oils & becomes a balanced Product without the Oil & Liquid Separation in the final result. Is the Polysorbate 80 the correct Product for this attempt/use?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We do not craft with grain alcohol, so this recipe is one that you would need to test.

Posted By: WSP Staff   |   Date: August 04, 2022

Was this answer helpful? Yes | No

---

Posted By: Dee   |   July 02, 2022

"I'm formulating a body wash/shower gel that'll consist of Water, Aloe Vera Juice, Cocamidoproply Betaine, Decyl Glucoside, Glycerin, Xanthan Gum and a few other ingredients. I want to add a carrier oil as well such as mango butter. I understand that I will need some sort of emulsifier to bind the carrier oil with the water and other ingredients. Will Polysorbate 80 work for this or will I need to use something else? If so, should the percentage used be equal to the amount of carrier oil?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Because this is a water-based product and you are adding oils and butters, the Poly 80 may help in binding the added ingredients. As a starting point, Poly 80 should equal the amount of other oils that are used in your formula, including fragrance. You would need to test how this works in your specific formulation.

Posted By: WSP Staff   |   Date: August 01, 2022

Was this answer helpful? Yes | No

---

Posted By: Sheena   |   March 17, 2022

"If I’m using the turmeric extract - water soluble into a liquid face wash formula, is the poly 80 needed? If so, how much do I add to the formula to keep the turmeric extract from separating? "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer If the liquid face wash is water soluble, then the poly 80 solubolizer is not necessary for the turmeric extract.

Posted By: WSP Staff   |   Date: March 18, 2022

Was this answer helpful? Yes | No

---

Posted By: Natalie   |   March 09, 2022

"Hi there- What is this polysorbate 80 derived from? Is it palm free or vegan?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer This product has multiple vegetable/plant sources, so we cannot confirm.

Posted By: WSP Staff   |   Date: March 16, 2022

Was this answer helpful? Yes | No

---

Posted By: Diana   |   January 13, 2022

"Do I need to use triethanolamine and disodium EDTA in my goat milk shower gel ? I bought the kit and used the contents but a friend mentioned these two items. Thank you Diana. "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We are not sure which kit you are referring to, so we cannot check the ingredients.

Posted By: WSP Staff   |   Date: January 24, 2022

Was this answer helpful? Yes | No

---

Posted By: Botanical Bath Soapery    |   December 11, 2021

"I want to create a lightweight moisturizer with a jelly-like consistency. Two ingredients would be your aloe vera base and carrier oil. I want to add 5-10% oil and When I do the oil separates from the gel. What emulsifier do I use to bind the aloe vera gel with the carrier oil? Poly 80 or Poly 60 and at what percentage? Should I heat ingredients for binding? "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Sorry, this is something you will need to research and test.

Posted By: WSP Staff   |   Date: December 15, 2021

Was this answer helpful? Yes | No

---

Posted By: William   |   December 07, 2021

"Is Ethylene Oxide used in the production of your Polysorbate products?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Yes, but there are no traceable amounts in finished product.

Posted By: WSP Staff   |   Date: December 13, 2021

Was this answer helpful? Yes | No

---

Posted By: Kela   |   November 24, 2021

"Hello, what is the ratio of polysorbate 80 to mica powder to incorporate into a bubble bath recipe?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Poly 80 should equal the amount of other oils that are used in your formula including fragrance.

Posted By: WSP Staff   |   Date: November 26, 2021

Was this answer helpful? Yes | No

---

Posted By: Teresa   |   November 12, 2021

"What is the shelf life of Polysorbate 80? "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We guarantee 1 year after purchase date for all of our products. After that, you can test the product's performance.

Posted By: WSP Staff   |   Date: November 15, 2021

Was this answer helpful? Yes | No

---

Posted By: Stacia   |   May 12, 2021

"Can this be used to avoid the color ring in tubs? I make an oil based scrub and colored Mica powders and I want to avoid the color ring. "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Yes, this is great for that purpose.

Posted By: WSP Staff   |   Date: May 13, 2021

Was this answer helpful? Yes | No

---

Posted By: ashley   |   March 17, 2021

"I received by poly 80 today... there is no lot number or manufactured date on the bottle. The label just says polysorbate 80 and the weight. I need at least a batch number or something. Why did the bottle get changed? How do I find a lot number? "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We are sorry for any inconvenience. Please call us and we will be happy to help you with this 1-800-359-0944

Posted By: WSP Staff   |   Date: March 18, 2021

Was this answer helpful? Yes | No

---

Posted By: Carrie   |   February 15, 2021

"My after sun spray contains aloe vera liquid, Vit E, distilled water and EO's in a 2oz amber bottle. Would poly 20 or poly 80 be better (I'm not concerned about cloudiness)? From my research, I'm thinking poly 80 would be best because of the alod? My bug spray contains witch hazel, distilled water and EO's in a 2oz amber bottle. Would poly 20 be better? Can I remove my products from the bottles, heat them up a bit and add the poly, or it is too late if they are already made up?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer You should go with the poly 80 to emulsify the oil and water. We are not sure if adding after the fact to this recipe will work, sorry but you will have to test on your own.

Posted By: WSP Staff   |   Date: February 17, 2021

Was this answer helpful? Yes | No

---

Posted By: Chisako   |   February 04, 2021

"Trying to make bath bombs with all-natural ingredients. Since polysorbate is not a natural ingredient, what do you suggest using instead? Thank you."

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We do not have an all-natural alternative to Poly 80 but it is not require to make bath bombs.

Posted By: WSP Staff   |   Date: February 05, 2021

Was this answer helpful? Yes | No

---

Posted By: Ashly   |   February 01, 2021

"Hello, I’m looking at using a blue mica powder for a bubble wand and the powder says I need to use Poly 80. How much do I need to incorporate and why? Thank you!"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Poly 80 should equal the amount of other oils that are used in your formula including fragrance.

Posted By: WSP Staff   |   Date: February 02, 2021

Was this answer helpful? Yes | No

---

Posted By: Jasmyne   |   January 19, 2021

"I’m looking to use polysorbate 80 in my Hydrating Hair Mist. I had planned on using equal parts oil and polysorbate 80 but should I warm the oil/polysorbate mixture, warm the water base or warm both prior to mixing? Also is a preservative necessary?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We recommend heating the water before. A preservative is required since water is included in your formula.

Posted By: WSP Staff   |   Date: January 20, 2021

Was this answer helpful? Yes | No

---

Posted By: Tiara    |   January 08, 2021

"Hello! I’m trying to make a hair butter with carrier oils but want to add honequaut and the manuka honey powder, what would be the proper way to incorporate these products since they are water soluble? How much water do I need to add? Thank you"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Hi, we cannot formulate this recipe for you but if you would like to call us we can try to help you as best as we can! 1-800-359-0944

Posted By: WSP Staff   |   Date: January 11, 2021

Was this answer helpful? Yes | No

---

Posted By: Kim   |   December 11, 2020

"Is this product derived from coconut oil? If not, what oil does it come from? I have a client who is severely allergic to coconut oil, so I want to be sure. Thank You!"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer This product can have multiple vegetable/plant sources so to be safe it should be avoided by those with severe allergies. It is also processed in a facility with coconuts.

Posted By: WSP Staff   |   Date: December 14, 2020

Was this answer helpful? Yes | No

---

Posted By: Prudence   |   November 28, 2020

"Hi, I make a coffee scrub that I'm told is leaving residue in the sink. I'm wondering if Polysorbate 80 is safe to use in a scrub for your face. Is Polysorbate 80 safe for your face or is it too harsh to use in products that will be used on your face?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Yes, Polysorbate 80 can be used safely in facial products.

Posted By: WSP Staff   |   Date: November 30, 2020

Was this answer helpful? Yes | No

---

Posted By: Nikki   |   October 18, 2020

"Hi, I want to make room and body sprays and see recipes with and without poly 80 and poly 20; which works best and will either of these eventually clog a spray pump? Thank you in advance! "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer These should not clog the pump. The polysorbate helps incorporate the fragrance into a water based formula. Polysorbate 20 is better for formulas with little oil while polysorbate 80 is for formula with more oil.

Posted By: WSP Staff   |   Date: October 19, 2020

Was this answer helpful? Yes | No

---

Posted By: Tia   |   October 15, 2020

"I’m looking through the bath salt recipes available on your site and noticed some recipes call for polysorbate 80 and others do not. Why is that? I thought maybe it was when mica was used but noticed a recipe with added mica and no p80 in the recipe. Is it generally recommended to add it in most recipes? "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer The Polysorbate 80 helps with dispersing the color in the water and keeping the mica from leaving a ring in the tub. It is not required to use it in recipes where you are not using an excessive amount of mica or are not worried about the mica dispearsing well and coloring the water. It basically comes down to preference and performance.

Posted By: WSP Staff   |   Date: October 15, 2020

Was this answer helpful? Yes | No

---

Posted By: Sandretta   |   September 02, 2020

"Could I use this in a shampoo mix of water, soap, carrier & essential oils & would I still need a preservative?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer This should work for that but as always you should do you own testing. You would still need a preservative.

Posted By: WSP Staff   |   Date: September 03, 2020

Was this answer helpful? Yes | No

---

Posted By: Stacy   |   August 12, 2020

"Is this safe to add to hair moisture spray because I will be using oils and water? Thank you "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Yes, this should be safe to use in a hair moisture spray.

Posted By: WSP Staff   |   Date: August 12, 2020

Was this answer helpful? Yes | No

---

Posted By: Home    |   June 24, 2020

"Im making foaming hand soaps, with fragrance and carrier oils, do I need both poly 20 and 80 or is the 80 enough? And the amount I use, it needs to be equal to the fragrance and carrier oil amount?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer You will need to test what works best in your particular product. If using Poly 80, you should not need to use the Poly 20 also.

Posted By: WSP Staff   |   Date: June 25, 2020

Was this answer helpful? Yes | No

---

Posted By: Home    |   June 11, 2020

"I am making my own foaming hand soaps, is this what I need to help keep the oils from settling on the bottom? I ordered the 20 but I am now thinking i should of ordered the 80. "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer The Poly 20 should work to mix fragrance oils and water. If adding fixed oils to the water, you would need the Poly 80.

Posted By: WSP Staff   |   Date: June 12, 2020

Was this answer helpful? Yes | No

---

Posted By: Rick   |   June 11, 2020

"I have a bath fizz powder recipe that is a total of 52 ounces of base (powder) and uses 12ml of fragrance oil. My customer is wanting her next batch to be red. I was told by someone to use about 1 tablespoon of red lake #40 to achieve the red color, but I am unsure how much poly 80 I should add to prevent staining of the tub and skin. Any suggestions?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer The Poly 80 should equal the amount of oils in your formula. If fragrance is the only oil, you should use at least 12ml. You may want to add more if using a large amount of color. You might want to make a small test batch first.

Posted By: WSP Staff   |   Date: June 11, 2020

Was this answer helpful? Yes | No

---

Posted By: Ashley   |   June 05, 2020

"Could this be used to bind light oils and water based extracts or Hydrosol?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer It would really depend on what product you are making. If this is a liquid product, you might want to consider Poly 20 or 80 for this purpose.

Posted By: WSP Staff   |   Date: June 08, 2020

Was this answer helpful? Yes | No

---

Posted By: Danielle   |   June 03, 2020

"I used equal parts WSP Poly 80 and WSP Lemon Verbena fragrance oil into water and it turned into a weird gel instead of dissolving. What went wrong? "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We recommend adding to a warm base. If you warm this mixture, it should dissolve and blend together.

Posted By: WSP Staff   |   Date: June 04, 2020

Was this answer helpful? Yes | No

---

Posted By: cheprei   |   May 15, 2020

"can I use this in foaming whipped soap ,I'll be adding fragrance in it also."

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Yes, you can add this to foaming bath soap, if desired.

Posted By: WSP Staff   |   Date: May 18, 2020

Was this answer helpful? Yes | No

---

Posted By: Karen   |   March 09, 2020

"How do I figure out what percentage of poly to put in a recipe. "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer The Poly 80 usually equals the amount of oils being added to your recipe.

Posted By: WSP Staff   |   Date: March 09, 2020

Was this answer helpful? Yes | No

---

Posted By: Diana   |   January 11, 2020

"What's the difference between Polysorbate 60 and Polysorbate 80?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Polysorbate 80 is used mainly as an emulsifier binding water and oils. Polysorbate 60 is a stearic acid which is used mainly as a thickener and also an emulsifier.

Posted By: WSP Staff   |   Date: January 13, 2020

Was this answer helpful? Yes | No

---

Posted By: Shameila    |   January 09, 2020

"Im making bath salts using black sea salt how do i use this? Do i add this to carrier oil and fragrance and pour on the salts and let them dry or can I not use a carrier oil? Would I need to use a preservative as well? "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer A carrier oil can be used but we recommend small amounts blended into the salts. Too much will make the bathtub very slippery. The amount of Poly 80 should equal the amount of oil being added, including fragrance. Then blend the liquids into your salts. A preservative is not needed. Here is a link to some salt recipes that might be helpful: https://www.wholesalesuppliesplus.com/handmade101/how-to-make-recipes/bath-salts.aspx

Posted By: WSP Staff   |   Date: January 09, 2020

Was this answer helpful? Yes | No

---

Posted By: Xinran   |   December 01, 2019

"I tried to mix this into my bath oil, but it just sits at the bottom instead of mixing into the oil. Is this supposed to happen?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Does your bath oil contain any water that you are trying to solubilize with the poly 80? It is not meant to be mixed into an oil-only product.

Posted By: WSP Staff   |   Date: December 02, 2019

Was this answer helpful? Yes | No

---

Posted By: carolina    |   November 10, 2019

"does poly 80 go bad. i have a bottle here says used by 8/23/19 what will happen if i use it to make bath truffles? is it still usable 2 months after the use by date?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Poly 80 is best used within a year but is still good after this best used date. Your bath truffles will be fine if using this product. We would not recommend using if over 24 months old.

Posted By: WSP Staff   |   Date: November 11, 2019

Was this answer helpful? Yes | No

---

Posted By: Dawn   |   October 31, 2019

"Should this be added in the heated oil phase or cool down phase I use it for my leave in hair spray it binds the oil and water but there is still light fizzy at the top. My customers don’t mind but annoys me! "

Click Here To View 2 answer(s)

Email Me When This Question Gets Answered

Staff Answer The Polysorbate 80 does tend to bubble slightly. We do not know any way to prevent this. The best way to add to your product is to blend in with the oil in your formula before adding to the water phase. This product can be heated.

Posted By: WSP Staff   |   Date: October 31, 2019

(1) Found this helpful. Was this answer helpful? Yes | No

---

When I make the hair spray I don’t heat anything. I’ll try that today

Posted By: Dawn   |   Date: October 31, 2019

Was this answer helpful? Yes | No

---

Posted By: Tameka   |   October 30, 2019

"How much Polysorbate 80 would be recommended to use in a 4 oz recipe with oil, water and fragrance oil without it separating?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer You would use Polysorbate 80 equal to the amount of oil in your recipe. If it separates, you would add more, a little at a time, until it stays blended.

Posted By: WSP Staff   |   Date: October 31, 2019

Was this answer helpful? Yes | No

---

Posted By: Lorell   |   October 08, 2019

"I want to make a bath oil would this be good to use to make the oils combine with the water And do you have a recipe for a bath oil"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Adding Poly 80 to your bath oil will help disperse it throughout the bath water. Here is a link to our bath oil recipes: https://www.wholesalesuppliesplus.com/handmade101/how-to-make-recipes/moisturizing-body-oil.aspx

Posted By: WSP Staff   |   Date: October 08, 2019

Was this answer helpful? Yes | No

---

Posted By: Megan   |   June 13, 2019

"I want to make a product that is mainly jojoba oil and add bee pollen extract which is water soluble. Would you recommend poly 20 or 80? And would I need a preservative?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We would recommend using Poly 80 for this product. Without knowing the ingredients, we cannot say for sure if you need a preservative. The Bee Pollen does have preservative added.

Posted By: WSP Staff   |   Date: June 14, 2019

Was this answer helpful? Yes | No

---

Posted By: Mirtha   |   June 08, 2019

"How much of this would I add to a sugar scrub I am creating? Lets say 4 ounces of sugar scrub that contains oils and water based products? Thank you!"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We would recommend starting with an equal amount of poly 80 and your oils to start. You may need to adjust once your product is made.

Posted By: WSP Staff   |   Date: June 10, 2019

Was this answer helpful? Yes | No

---

Posted By: Allison   |   May 05, 2019

"What kind of packaging does the 7 pound version come in?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer This is packaged in a plastic gallon jug.

Posted By: WSP Staff   |   Date: May 06, 2019

Was this answer helpful? Yes | No

---

Posted By: Ginny   |   April 26, 2019

"Do Shea50 and Polysorbate 80 do the same thing in helping the oils mix with the water? If not, can I use them together? "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer They are similar products. If using Shea 50 in bath fizzies, you do not need to use Poly 80. You can use both ingredients together in a recipe, if desired.

Posted By: WSP Staff   |   Date: April 29, 2019

Was this answer helpful? Yes | No

---

Posted By: Jen   |   April 14, 2019

"If I’m making a whipped scrub using foaming bath whip as a base and an emulsified scrub (both contain oils and/or butters), is poly 80 necessary when adding micas? Would I still need the mica locking powder? Thanks!"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer It is not absolutely necessary to add Poly 80 but you may want to use it especially in your scrub using the foaming bath whip. Since this is a water based product and you are adding oils and butters, the Poly 80 may help in binding the added ingredients into the bath whip.

Posted By: WSP Staff   |   Date: April 15, 2019

Was this answer helpful? Yes | No

---

Posted By: Gabriel Salazar   |   March 13, 2019

"Can I use this in fizzy powders? How much for 1 lb?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer The amount of Polysorbate 80 usually matches the amount of oils (fixed, butters or fragrance) in the recipe. This contains 2 ml fragrance oil so that is what would be added. If the product seems wet from adding this, you may need to let the fizzy powder set out on a cookie sheet overnight to dry before packaging.

Posted By: WSP Staff   |   Date: March 14, 2019

Was this answer helpful? Yes | No

---

Posted By: Stines River Candle Company   |   February 20, 2019

"Can polysorbate 80 or polysorbate 20 be used to blend fragrance with foamer soap? If so does the foamer soap need to be heated? when blended cold it produced a jelly ball but heating the foamer soap did not produce this?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer You want to use Poly 20 in a foaming soap. It does help to warm the product before adding fragrance and the Poly 20 which it sounds like you discovered when adding to a cold base.

Posted By: WSP Staff   |   Date: February 21, 2019

Was this answer helpful? Yes | No

---

Posted By: Anna   |   January 18, 2019

"Is this polysorbate derived from animals or plants?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer This product is plant based.

Posted By: WSP Staff   |   Date: January 21, 2019

Was this answer helpful? Yes | No

---

Posted By: Norah   |   January 13, 2019

"Hello! I'm making bath bombs and trying to test my colors in water before I add it to the recipe. I've been trying to mix poly 80 and colorant (micas or lakes) and then just mix it with water to see the effect - but when I do that the poly 80 seems to seize up and create a stiff gel. This has happened when I mix my wet ingredients before hand (and included water) and when I've just added the poly 80 to water. What could be causing that?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Poly 80 is added to help the oil and water blend together. You do not have any oil in your testing mixture. You may want to add a small amount of carrier oil when doing your testing.

Posted By: WSP Staff   |   Date: January 14, 2019

Was this answer helpful? Yes | No

---

Posted By: Cynthia   |   January 07, 2019

"Can this be used in Lip products (Lip Balms)?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Poly 80 is used for helping to bind oil and water. Lip products do not normally contain water but if needed, this can be added to your lip balm.

Posted By: WSP Staff   |   Date: January 08, 2019

Was this answer helpful? Yes | No

---

Posted By: Jenifer   |   November 27, 2018

"When I use this, it completely separates and leaves small chunks of thick goo in the product. Am I doing something wrong? Theres no instructions on how to use. Thx."

Click Here To View 2 answer(s)

Email Me When This Question Gets Answered

Staff Answer We would need to know what product you are putting this in before we can answer.

Posted By: WSP Staff   |   Date: November 28, 2018

Was this answer helpful? Yes | No

---

Thanks, I was putting it in the body splash base. It seems to have dissolved now and looked ok after about 20 minutes or so.

Posted By: Jenifer   |   Date: November 28, 2018

Was this answer helpful? Yes | No

---

Posted By: Jeanie   |   November 17, 2018

"Can I add Polysorbate 80 to bubbling bath bombs that contain SLSA? Will it reduce the bubbles? "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer The purpose of polysorbate 80 is to help oil mix in water. It aids in the rinsing of oil based products. You can add it to bath bombs with SLSA. It should not reduce spinning or bubbling.

Posted By: WSP Staff   |   Date: November 17, 2018

Was this answer helpful? Yes | No

---

Posted By: carolina    |   August 27, 2018

"how much of this is supposed to be added to a bath bomb recipe. i saw it said same as the amount of oils ur adding. is that essential oils or the oils or butters ppl add for the skin benefits?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer The amount of Poly 80 should equal the amount of oils (fixed and fragrance/essential) and butters in the recipe.

Posted By: WSP Staff   |   Date: August 28, 2018

Was this answer helpful? Yes | No

---

Posted By: Meghan   |   August 17, 2018

"Is that all natural or synthetic?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Polysorbate 80 is not a natural ingredient.

Posted By: WSP Staff   |   Date: August 20, 2018

Was this answer helpful? Yes | No

---

Posted By: Melisa   |   August 11, 2018

"I'm starting to make bath paints, bubble bath playdough, and MP bath crayons using the shower gel base and bubble bath base with bubble up can I use polysorbate 80 in these to prevent stains in the tub and tile(the grout especially) also what type of dyes do you suggest? Most recipes I see a list food coliring. Thanks!!"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We do not recommend using food coloring. We would recommend looking at the recipes we have on our site for these products. Poly 80 is used mainly to help the oils and color disperse in the water rather than sitting on the top or gathering around the edge of the tub.

Posted By: WSP Staff   |   Date: August 14, 2018

Was this answer helpful? Yes | No

---

Posted By: Moosehead Rustic Beauty   |   June 07, 2018

"What amount of this would you recommend for use with Neem Oil for a pest control spray? I plan to use 2 tablespoons Neem per gallon of water. Thanks."

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We recommend starting with equal amounts of Neem Oil to Poly 80. If you experience any separation continue to add more Poly 80 until it blends in.

Posted By: WSP Staff   |   Date: June 12, 2018

Was this answer helpful? Yes | No

---

Posted By: Moosehead Rustic Beauty   |   June 05, 2018

"Would either this or Polysorbate 20 work to bind Neem Oil to water for a garden pest control spray? Thanks."

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We would recommend trying the Polysorbate 80 since this is recommended for use with heavier oils. The Poly 20 blends fragrances with water based products.

Posted By: WSP Staff   |   Date: June 06, 2018

Was this answer helpful? Yes | No

---

Posted By: Cheri   |   June 04, 2018

"I am making room sprays... About 32 ounces. I only have polysorbate 80 not 20. How much polysorbate 80 should I use for this amount?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We recommend using equal amounts of poly 80 with your fragrance oil.

Posted By: WSP Staff   |   Date: June 06, 2018

Was this answer helpful? Yes | No

---

Posted By: Home   |   May 21, 2018

"Polysorbate 80 Whats the difference between this product and Germall Plus when it comes to salt and sugar scrubs used with oil? Which is best to use?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Germall Plus is a preservative. Polysorbate 80 is a solubilizer which helps oils and water mix together. They are two different products.

Posted By: WSP Staff   |   Date: May 23, 2018

Was this answer helpful? Yes | No

---

Posted By: Fallon   |   April 15, 2018

"I just added powdered dye and poly 80 to my bath bomb recipe to create cool colors. I didn’t have any problem with the dye staining but now my bath bombs fizz very slowly. I added pol 80 in equal parts to the oils but my sodium bicarbonate to citric acid ration remained unchanged (2:1). Will poly 80 slow the fizzing? is There anything else I can do to speed it up?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Adding any type of liquid can cut down on the fizzing of your bath bombs. Check the amount of oils in your recipe and see if that can be cut back along with the Poly 80. You can also add a bit more citric acid to your recipe. We have also found Shea 50 used in place of Poly 80 still keeps the bath bombs fizzing nicely.

Posted By: WSP Staff   |   Date: April 17, 2018

Was this answer helpful? Yes | No

---

Posted By: Mirtha   |   April 13, 2018

"Can I use polysorbate 80 to add oils to my bath salts? Will this allow them to blend into the water? Will the oil stick to the sides? What would be the correct ratio to use this? (For example my recipe calls for 1 tsp of oil, how much poly would I need?) Thank you!"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Yes, you can add poly 80 to bath salts. We have a few recipes where we have added this. You would normally add an equal amount of poly 80 to the oils in your product.

Posted By: WSP Staff   |   Date: April 16, 2018

Was this answer helpful? Yes | No

---

Posted By: Kerri   |   April 02, 2018

"I have a customer concerned about poly 80. Do you know if this is food grade, or if it contains ethylene oxide, 1,4-dioxane and mono- and diethylene glycol? "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer This product is not food grade. The exact ingredients are listed on the SDS sheet attached to this product.

Posted By: WSP Staff   |   Date: April 09, 2018

(1) Found this helpful. Was this answer helpful? Yes | No

---

Posted By: Haley   |   March 18, 2018

"I'm new to making sugar scrubs, and would like to keep the oils from leaving a greasy residue in the bathtub. Would this product do that? Are there alteratives that might also work? And will this make my scrub look different? Sorry to unleah so many questions at once :)"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Using Poly 80 will help disperse the oils throughout the bathwater. If using in the shower, though, it really will not help with the oily feel to the bathtub bottom. It should not make your scrub look any different.

Posted By: WSP Staff   |   Date: March 20, 2018

Was this answer helpful? Yes | No

---

Posted By: Sheila   |   February 08, 2018

"Does your Poly 80 have an odor? I purchased another brand and the odor was too strong and changed the scent of my bath bombs."

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Our Poly 80 has a very slight odor. We have used this many times and have not had it interfere with any fragrance.

Posted By: WSP Staff   |   Date: February 12, 2018

Was this answer helpful? Yes | No

---

Posted By: Nicole   |   November 10, 2017

"Can I use Polysorbate 20 in place of 80 in the orange furniture polish?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer The poly 80 is meant to work with oil based products, such as a furniture polish. The poly 20 works best mixing a water and oil product so we would recommend using the 80 in this recipe.

Posted By: WSP Staff   |   Date: November 13, 2017

Was this answer helpful? Yes | No

---

Posted By: Anne Reidun   |   November 05, 2017

"I am making bath salts and are looking for a dry solubilizer for the essential oils, so they wont stay undeluted in the water. Can I mix the EO into dry milk powder and then add it to the bath salt? Will that emulsify the oils in the water? I tried miksing the EO in a carrier oil, but the bath gets very slippery and Im afraid the salts will become hard in the package after a while, like a bath bomb."

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer You might actually try Slick Fix-Oil Locking Powder. This will hold the fragrance in the dry powder and then release it in the bath water. You can mix the powder with the salts. You can also try Polysorbate 80 which is a dispersing agent.

Posted By: WSP Staff   |   Date: November 08, 2017

Was this answer helpful? Yes | No

---

Posted By: Karen   |   October 28, 2017

"When do you use Polysorbate 80 and how much"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer This is normally mixed in equal parts of polysorbate to the oils in your recipe.

Posted By: WSP Staff   |   Date: October 30, 2017

Was this answer helpful? Yes | No

---

Posted By: Sweet Sense   |   September 27, 2017

"I made a salt blend with a butter. Will this help disperse the butter into the water instead of floating on top? If so, at what percent? Since, I have made my test batch. Can this be remixed into the final product for retesting? Thanks."

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer The Poly 80 will help the butter in your formula blend into the water. It should be mixed in with the oil/butter in equal amounts when making your product. You can try blending into your final product but we cannot be sure how well it will work since it is not added into the product during production.

Posted By: WSP Staff   |   Date: September 28, 2017

Was this answer helpful? Yes | No

---

Posted By: Mrs K   |   September 05, 2017

"I forgot to add this to my fragrance oils, now the FO is sitting on the bottom of the bottles... Can I take the finished product and add poly 80 fix this? "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer You did not state what product you had made but just try adding it to one bottle and see what happens.

Posted By: WSP Staff   |   Date: September 07, 2017

Was this answer helpful? Yes | No

---

Posted By: Susan   |   August 08, 2017

"I have the 16oz (1lb) size of the polysorbate 80. I need to order a new lid for the bottles ... what size is it? "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer The cap size for these bottles is 28/410.

Posted By: WSP Staff   |   Date: August 11, 2017

Was this answer helpful? Yes | No

---

Posted By: Charlynn   |   June 29, 2017

"Is your polysorbate 80 vegan?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Because our vendors do not consistently use the same source, we cannot commit to one or the other. We cannot state that this is or is not vegan.

Posted By: WSP Staff   |   Date: June 30, 2017

Was this answer helpful? Yes | No

---

Posted By: Bryttanee   |   June 14, 2017

"In order to use micas or other powdered colorants in bath bomb recipes, how much polysorbate 80 should I add to prevent color from staining the bath tub?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer You may need to experiment on how much to use with your particular recipe but it is recommended to use equal amounts of poly 80 with your oils.

Posted By: WSP Staff   |   Date: June 15, 2017

Was this answer helpful? Yes | No

---

Posted By: Hagan    |   June 09, 2017

"So I want to make a body spray that contains essential oils and distilled water, will poly 80 help solubilize the water and oil to stay blended? Thx. "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer You can use the Poly 80 but the Poly 20 would work fine for the product you are making. It is made to do exactly what you described, "Allows fragrance and essential oils to bind with water based products".

Posted By: WSP Staff   |   Date: June 13, 2017

Was this answer helpful? Yes | No

---

Posted By: Stacy   |   May 05, 2017

"So making bath bombs first time. Everyone saids they can use mica with this added to there bath bombs so the color doesn't get left behind in tub. So does that mean any Mucas can be used with adding this or just the bath bomb type ? "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Adding the Polysorbate 80 to any bath bomb recipe will help prevent any colors from sticking to bathtub.

Posted By: WSP Staff   |   Date: May 05, 2017

Was this answer helpful? Yes | No

---

Posted By: Heather   |   April 27, 2017

"Hi! Do you sell/know of a natural alternative to polysorbate 80? I'm selling bath bombs to a client and she wants the formula to be all natural. Thank you!"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We do not sell an all natural alternative to Polysorbate 80. You can leave this ingredient out of the product, if you choose.

Posted By: WSP Staff   |   Date: May 01, 2017

Was this answer helpful? Yes | No

---

Posted By: margarita   |   March 22, 2017

"What is the difference between polysorbate and the EO FO modifier?"

Click Here To View 2 answer(s)

Email Me When This Question Gets Answered

Staff Answer They both work to blend fragrance and essential oils with water based product so they stay mixed together. The FO & EO Modifier will keep the final product clear whereas the polysorbate will cloud your final product.

Posted By: WSP Staff   |   Date: March 24, 2017

Was this answer helpful? Yes | No

---

i see that the EO FO modifier is a ratio of about 4 to 1 what is the ratio of the polysorbate?

Posted By: margarita   |   Date: March 24, 2017

Was this answer helpful? Yes | No

---

Posted By: Jessica   |   February 07, 2017

"I this considered a natural ingredient? Does it contain parabens?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer This is not considered a natural ingredient but it does not contain parabens.

Posted By: WSP Staff   |   Date: February 21, 2017

Was this answer helpful? Yes | No

---

Posted By: stacey   |   April 23, 2016

"Can I use 80 or 20 in liquid soap?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Polysorbate 20 is used in liquid soap to help solubilize fragrances with soap. Polysorbate 80 is generally used to solubilize carrier oils.

Posted By: WSP Staff   |   Date: April 26, 2016

Was this answer helpful? Yes | No

---

Posted By: stacey   |   March 20, 2016

"when using polysorbate 80 or 20, do i still need to use optiphen plus as a presevative in water based lotions?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Yes you will still need to add a preservative, Polysorbate 20 & 80 are modifiers that allow oils to mix with water-based products and have no preservation properties.

Posted By: WSP Staff   |   Date: March 22, 2016

Was this answer helpful? Yes | No

---

Posted By: Linda   |   February 13, 2016

"In your Volume 41 Handmade Magazine you say to add this ingredient to bath bombs to keep the bath tub from being to slippery when using oils. However, there is nothing about how much to use or I missed it. "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Hi Linda, Polysorbate 80 is recommended to be added at levels of 1-20%.

Posted By: WSP Staff   |   Date: February 15, 2016

Was this answer helpful? Yes | No