We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Creating puzzle piece soap doesn't have to be an enigma. Use this silicone mold to create soap suitable for an autism related fundraiser or for your puzzle solving friends!
Common Uses:
Melt & Pour Soap (MP). Cold Process Soap (CP). Cold Process Oven Process Soap (CPOP). Hot Process Soap (HP). Lotion Bars.
Points of Interest:
Maximum Temperature: 500ºF
Manufacturer: Crafter’s Choice®
Material: Silicone
Country of Origin: China
Country Of Origin: China
Helpful Product Information:
Style: Bar
Avg. Bar Weight: 1.2 oz
Bar Cavities: 8
Bar Depth: 0.875"
Bar Length: 2.625"
Bar Width: 1.625"
Max Temperature: 500ºF
Mold Capacity (oz): 9.6
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: I bought 2 of these mold and I highly recommend them. These pieces interlock and are very easy to unmold. Thicker silicone so no worries about tearing the mold. Fun for all ages!
COMMENTS: My sister has an Autistic child and there are fund raising programs she is involved with and I donate the cold process red,blue,green and yellow puzzle pieces(colors for Autism) to be sold for the organization. This mold works really well for cold process, so glad I found this.
PRODUCT USED IN: Soap - Cold Process
angela • Maryland
Date Submitted: 10/31/2016
I Recommend This Product!
"Great solid, sturdy and flexible mold"
COMMENTS: This is a well made mold, the puzzle pieces fit together with easy making for a wonderful presentation. Both adults and children enjoy playing with the soaps and the soaps fit perfectly into your hand. Good sized cavities,ease of use.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Good size • Easy to remove • Fun
• Nothing, good mold!
Karen • Washington
Date Submitted: 04/06/2016
I Recommend This Product!
"Very fun mold!"
COMMENTS: Easy to use and very easy to remove from mold. Love all of WSP silicone molds.
PRODUCT USED IN: Soap - Melt & Pour
Pamela • Ohio
Date Submitted: 03/23/2016
I Recommend This Product!
"great mold"
COMMENTS: My kids loves the puzzle soap. I will buy more
PRODUCT USED IN: Soap - Melt & Pour
Mary • Nevada
Date Submitted: 08/22/2015
I Recommend This Product!
"Puzzle Mold"
COMMENTS: Another adorable soap mold. My 5 year old niece loves to help make soap using this mold.
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Retired Soap Molds
