Rose Small Silicone Mold - Wholesale Supplies Plus
 
25% Off Colors, Bath Whip & More! - Shop Now!
 
 
Wholesale Supplies Plus
 
   
 
OUR BRANDS:
 
 
Wilton™

Rose Small Silicone Mold

Mold soap and cosmetics into small beautiful roses with this silicone mold. The finished soaps can be used as small guest bars or embedded into the top of a soap loaf. Pair with a pink or red color and a lovely floral fragrance to complement the design. More details
Size
Rose Small Silicone Mold

Pay in 4 interest-free payments on purchases of $30-$1,500 Learn more

Document IconProduct Details

Mold soap and cosmetics into small beautiful roses with this silicone mold. The finished soaps can be used as small guest bars or embedded into the top of a soap loaf. Pair with a pink or red color and a lovely floral fragrance to complement the design.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Hot Process Soap. Lotion Bars. Bath Melts.

Points of Interest:
Silicone construction allows for easy soap removal. Detailed rose design in each cavity. Lovely as embeds to decorate rose scented soap slices!

Manufacturer: Wilton
Material: Silicone
Style: Cavity Mold
Number of Cavities: 12
Country of Origin: China
Color: Pink
Max. Temperature: 500ºF
Mold Dimensions: 8.25" x 5.75" x 0.5" Wash molds in warm, sudsy water.

Helpful Product Information:
Style: Bar Avg. Bar Weight: 0.30 oz
Bar Cavities: 12 Bar Length: 1.5"
Bar Width: 1.5" Bar Depth: 0.5"
Max Temperature: 500ºF

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.

Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.

Care:
Hand wash in warm sudsy water.

Product Information:

Brand Wilton™
Country Of Origin China

CA Prop 65

Documents:

Non-Hazardous Statement Animal Testing Statement

Clipboard IconRecipes & Videos (2)

Question Mark IconQuestions & Answers (2)

Comment IconCustomer Reviews (7)

Photo IconCustomer Photos

Levels IconCharts & Calculators