WSP Latest News ~ COVID-19 Updates
Lead Times 8-10 Business Days FREE SHIPPING ~ On Orders Over $25*
 
 
Wholesale Supplies Plus
0
 
   
 
 
 
Soap Molds Plastic & Silicone Molds Basic - Smooth Designs - (You Are Here - P8543)

Crafters Choice™ Round Basic Silicone Mold 1602

Pricing
$14.12 for 1 Mold
$64.77 for 5 Mold
$345.27 for 34 Mold (Bulk)



Additional Information
Create classic circular soap with this traditional round silicone mold. This is our favorite mold to use with our rubber duckies or luffas. A festive rubber duck can be found for most holidays, and luffa soap is perfect for pedicures.

Country Of Origin: China

Helpful Product Information:
Style: Bar Avg. Bar Weight: 5 oz
Bar Cavities: 6 Bar Depth: 1.25"
Bar Diameter: 3" Bar Length: 3"
Bar Width: 3" Max Temperature: 500ºF
Mold Capacity (oz): 30



This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.

Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.

Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.

Care:
Hand wash in warm sudsy water.
SDS & Documents
Questions & Answers (9)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 9 Question(s) Shown Below



Q Bubble
Posted By: April   |   May 24, 2019

"What size shrink band to use with soap from this mold?"




Q Bubble
Posted By: Louise   |   January 02, 2019

"Can you please make a written recipe on how to make pinwheel soaps? Thank You."




Q Bubble
Posted By: Ronda   |   September 25, 2018

"Will these boxes work with the mold 1602?"




Q Bubble
Posted By: Corinne   |   April 16, 2018

"How do I determine the amount of oils needed for this particular mold? I usually do: Length(of mold) X Width X Depth X 0.4 Please advise. Thanks!"




Q Bubble
Posted By: Angela   |   September 14, 2017

"These look different. Are these the same as the Yellow 0602 Crafters Choice Round Basic Silicone molds, and the Yellow 1602 Crafters Choice Round Basic Silicone molds? Is 1602 and 0602 the same thing?"




Q Bubble
Posted By: Alycia   |   June 24, 2017

"How in the world do you get the melt and pour out of the mold? I tried lubricating the mold I tried the freezer I tried the refrigerator I cannot get the soap to release I literally have to turn the mold inside out to get the soap out."




Q Bubble
Posted By: R.   |   March 09, 2016

"How many ounces (cp process) can this mold hold?."




Q Bubble
Posted By: Eleanor   |   August 18, 2015

"Can these be used for homemade vicks shower tabs"




Q Bubble
Posted By: Debra   |   August 14, 2013

"I am making soaps in a 3 inch pvc tube for a client. He is very specific in what he wants. Is this mold comparable? Are the edges rounded or squared off. I'd like to try it, but want to be sure before I buy it. Thanks!"


Recipes & Videos (19)
CustomerReviews (130)
Submit A Rating Average Customer Rating: (130 Reviews)



Maurette • Idaho

Date Submitted:  11/15/2019

I Recommend This Product!
"Great silicone mold "
COMMENTS:  I had been looking for a mold to make round luffa soap. This did the trick wonderfully. This mold is very sturdy silicone. It was a little harder to get the soap out then most other silicone molds I have used. After thinking about it, this mold is similar to the one we got from you several years ago. It is the silicone mold in a loaf that can be cut into 7 or 8 bars of soap (depending on the size they are cut- 4 to 5 ounce bars.). We are still using this loaf mold. So I imagine that this round mold will last for years. I am very pleased with the end result. I made cold process goat milk soap with lemon grass essential oil. Before pouring the soap in the mold, I did spread a light cpoating of sunflower oil on the surface. I think this helped to get the soap out of the mold a little easier. I also was going to get this when the mold was on sale, but the sale ended earlier then I thought. So I had to pay the full price, but I am still very pleased with it. It makes nice round bars of soap. After curing for a week they weigh around 4.5 ounces.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• The end product
• The price. Better price on sale.
Lanna • Pennsylvania

Date Submitted:  10/23/2019

I Recommend This Product!
"Luffa soaps!"
COMMENTS:  Just right for luffa soaps. Makes a nice 5oz bar. Easy to pop soaps out!
PRODUCT USED IN:   Soap - Melt & Pour
Sharon • Pennsylvania

Date Submitted:  09/20/2019

I Recommend This Product!
"Round Basic Mold"
COMMENTS:  This is the first time I used this mold and I absolutely love it. The bars are just simply elegant. They also are perfect for loofahs, which I also used for the first time. I will be ordering more of both!
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Size bar
Samantha • Ohio

Date Submitted:  08/18/2019

I Recommend This Product!
"perfect for luffa soap"
COMMENTS:  Perfect for my individual luffa soaps
PRODUCT USED IN:   Soap - Cold Process
Robin • Georgia

Date Submitted:  06/02/2019

I Recommend This Product!
"Perfect!"
COMMENTS:  This is the perfect mold! I used it to make cold process soap and it made beautiful bars of soap! I had no trouble getting the bars out of the mold! I did not have to put the mold in the freezer to get them to release. The bars are the perfect hand size and my recipients love that! I am buying second mold today!
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Shape
• Size
• Easy release of soap
Marilyn  • Pennsylvania

Date Submitted:  03/21/2019

I Recommend This Product!
"Upgraded Mold"
COMMENTS:  This mold is an upgrade from the ones I was using previously. They hold 5 ounces with a loofah embed and have smoothe, rounded edges.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - Shampoo Bars, Face Care
Annette • Texas

Date Submitted:  01/03/2019

I Recommend This Product!
"Great sized bars"
COMMENTS:  This makes a really nice 5 oz bar of soap. So many cavity molds fall short of being a good bath bar but these are perfect. I use theme during holidays to place MP embeds on top as an easy holiday soap and I use loofah to embed in MP for pedicure bars. Perfect size for shave soaps as well. I really like this mold.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
April • Missouri

Date Submitted:  12/27/2018

I Recommend This Product!
"Good"
COMMENTS:  Works well for mp soap. It was not blue like the pic. The silicone was not perfectly smooth and did leave a slight texture on my bars, I’m probably the only person who noticed.
PRODUCT USED IN:   Soap - Melt & Pour
Diana • Oregon

Date Submitted:  11/02/2018

I Recommend This Product!
"Rubber duvkies and loofas made"
COMMENTS:  Perfect size for both duckies which i found at a dollar store for cheap. Loofas as well. They are great for these
PRODUCT USED IN:   Soap - Melt & Pour
Tonya • Pennsylvania

Date Submitted:  08/17/2018

I Recommend This Product!
"Perfect size for loofah"
COMMENTS:  I get so many requests for my loofah soaps. But it's difficult to cut them (my hubby was using a band saw!). This way, I can precut my loofah to perfect size, and I get nice, even, professional bars.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Lotion Bars & Sticks
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Perfect width & depth
• Easy to fill and unmold
• A bit more affordable
Michelle • Illinois

Date Submitted:  08/15/2018

I Recommend This Product!
"Great for bath fizzies!"
COMMENTS:  I'm new to the bath fizzie hobby, and my husband knowing that, got me a few things from WSP! This mold is great for disk shape bath fizzies, and it's very durable. I may have to start making lotion bars, because this mold is the perfect shape for that too.
PRODUCT USED IN:   Bath Fizzies & Salts, Lotion Bars & Sticks
Dennis • Georgia

Date Submitted:  06/10/2018

I Recommend This Product!
"Round Basic Silicone Mold 1602"
COMMENTS:  Got the basic round silicone mold 1602 to embed the vinyl Gold Fish in, as well as for making the Spa Duck Soap. The mold is very sturdy (yet flexible), and the depth of the wells make it perfect for embeds, plus it's a really nice size for a round soap.
PRODUCT USED IN:   Soap - Melt & Pour
sindy • Arkansas

Date Submitted:  04/01/2018

I Recommend This Product!
"GREAT"
COMMENTS:  Product is GREAT!! Makes what your making even better.Perfect size easy to unmold
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Bath Fizzies & Salts
David • Tennessee

Date Submitted:  03/24/2018

I Recommend This Product!
"Perfect for loofah soap"
COMMENTS:  Bought several of these to make loofah "infused" soap. They are just perfect! Glad I bought enough to make large batches.
PRODUCT USED IN:   Soap - Cold Process
Deb • Pennsylvania

Date Submitted:  02/24/2018

I Recommend This Product!
"Nice mold!"
COMMENTS:  I love this mold for facial bars, but I also keep this handy to pour in any extra batter I have at the time. These are very sturdy. Easy to un-mold your soaps.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
Stacy • Colorado

Date Submitted:  02/21/2018

I Recommend This Product!
"Great Mold!"
COMMENTS:  I am new to soap making, but tried some melt & pour soaps and also used these for my lotion bars. I love that the mold is silicone and soft sided for easy popping out, but it also has nice sharp edges and corners. And a good depth!
PRODUCT USED IN:   Soap - Melt & Pour, Lotion Bars & Sticks
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Nice Edges
• Easy Removal
Darla • Kentucky

Date Submitted:  02/01/2018

I Recommend This Product!
"Great"
COMMENTS:  This is a great little mold for your basic round soap. Nothing fancy, just basic and simple. Un-molds easily and cleans up well.
PRODUCT USED IN:   Soap - Melt & Pour
shannon • Texas

Date Submitted:  11/29/2017

I Recommend This Product!
"round "
COMMENTS:  perfect for loofah soaps
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• everything
Tracy • Arizona

Date Submitted:  09/21/2017

I Recommend This Product!
"User Friendly"
COMMENTS:  I love this mold... it's easy to remove product; it's very strong and durable; and holds it shape well. I use it for my luffa soaps, exfoliating scrub bars and bath bombs.
PRODUCT USED IN:   Soap - Melt & Pour, Bath Fizzies & Salts, Lotion Bars & Sticks
Lady Diannaly • Texas

Date Submitted:  05/31/2017

I Recommend This Product!
"Versatile Mold"
COMMENTS:  This is a great investment! Waayyyy better quality than the cheapie ones so price-wise it isn't bad at all. Not flimsy at all. Your soap are safe with this one.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• The sturdiness of the material used.
Kathleen • Virginia

Date Submitted:  05/31/2017

I Recommend This Product!
"Love, love, love this mold!"
COMMENTS:  Easy to use and flexible which has kept it's shape well. Produces a nice handling size soap.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• shape
• size
Danielle • California

Date Submitted:  05/19/2017

I Recommend This Product!
"Sturdy yet Flexible"
COMMENTS:  Great molds that can be used over and over. Seems very sturdy and easy to remove the soap.
PRODUCT USED IN:   Soap - Melt & Pour
Bonnie  • West Virginia

Date Submitted:  05/02/2017

I Recommend This Product!
"Excellent mold"
COMMENTS:  This is the best mold of its type on the market. I use it for loofah m&p soaps. Perfect size, excellent quality.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Quality
• Size
Lucretia • Georgia

Date Submitted:  04/05/2017

I Recommend This Product!
"Get two!"
COMMENTS:  Perfect size. Made soap on a rope with loofah using M&P. Love silicone molds. It is sturdy, holds up well. I'm so glad that I got two. Will order another pair.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Sturdy
• Economical
Karen • Utah

Date Submitted:  03/21/2017

I Recommend This Product!
"Round silicone mold"
COMMENTS:  This round mold is the perfect size for making exfoliating soaps with luffa. I love the fact it's silicone. This will be a great seller with summer coming up.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - Shave Shampoo, Bath Fizzies & Salts, Pet Care
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Great size
• Nothing
Sharon  • South Carolina

Date Submitted:  03/20/2017

I Recommend This Product!
"Works wonderfully"
COMMENTS:  Used this mold to make luffa soaps and these were a perfect match with the luffas. Looks wonderful together.
PRODUCT USED IN:   Soap - Melt & Pour
kris • Florida

Date Submitted:  01/11/2017

I Recommend This Product!
"Round Silicone Mold"
COMMENTS:  Very sturdy, not flimsy at all. Used to make MP with loofah. Perfect diameter and depth.
PRODUCT USED IN:   Soap - Melt & Pour
Elena • Arkansas

Date Submitted:  09/14/2016

I Recommend This Product!
"satisfied with these molds"
COMMENTS:  Great quality molds
PRODUCT USED IN:   Soap - Shampoo Bars
Christa • Michigan

Date Submitted:  09/06/2016

I Recommend This Product!
"In love"
COMMENTS:  I am in love with this mold. I will be able to make so many luffa soaps with this. My very first soap. Great experience. Thanks Debbie may for the recommendation .
PRODUCT USED IN:   Soap - Melt & Pour
Irma • Virginia

Date Submitted:  08/24/2016

I Recommend This Product!
"wonderful size"
COMMENTS:  I waited several weeks for this mold to be available once I read testimonials and saw pictures about how useful it could be. It was worth ever second of the wait ! Makes six large size perfectly round soaps that fir very nicely in the hand. The silicon is stiffer than what I am used to, so the soaps are a little more work to unmold, but that is a minor problem. Exactly the right size for luffa rounds, and also works well when I pour see-through layers with flower or sea shell shaped soaps inside.
PRODUCT USED IN:   Soap - Melt & Pour
Allison • Texas

Date Submitted:  07/15/2016

I Recommend This Product!
"Excellent "
COMMENTS:  Beautiful easy to unmold perfect soaps
PRODUCT USED IN:   Soap - Melt & Pour
Tami • California

Date Submitted:  06/27/2016

I Recommend This Product!
"Round Mold"
COMMENTS:  My most used mold! Wonderful quality!!
PRODUCT USED IN:   Soap - Melt & Pour
Agnes • New York

Date Submitted:  05/31/2016

I Recommend This Product!
"Great Mold"
COMMENTS:  Great Mold! Will be buying more.
PRODUCT USED IN:   Soap - Melt & Pour
lovetosoap • Utah

Date Submitted:  05/21/2016

I Recommend This Product!
"No More Pringles Cans!"
COMMENTS:  Great mold! This mold is very durable, and the cavities are just the right size. Pringles cans have served me well, but I'm excited to be able to do round soaps that I can dress up a little more than if I put it in a can. Soaps popped out beautifully.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Ease of Use
• Quality
• Good size
Rachelle • Colorado

Date Submitted:  05/01/2016

I Recommend This Product!
"Easy to use for CP"
COMMENTS:  I bought the COMBO pack of these silicon molds. They are all easy to use and the shapes are all fun. I actually like the square and the oval more than I expected! My CP soap comes out of these very well. I have made plain bars in these already. Now I am thinking about stamping the bars for extra flare.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Size
• Shape
• Feel of the bars in your hand
Casey • Michigan

Date Submitted:  05/01/2016

I Recommend This Product!
"Very nice "
COMMENTS:  I used this mold for my first try at melt and pour soap. I found it very easy to use. My soaps came out perfectly! I also like the size of the soap that it makes. I'm sure I will be using it again and again.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Ease of use
• Size
Laura • Alabama

Date Submitted:  03/30/2016

I Recommend This Product!
"Great quality!"
COMMENTS:  I use these molds for MP as well as CP soap and they have held up nicely. They are all just as sturdy now as they were when I purchased them several years ago. For the CP soap, I simply put them in the freezer before pushing them out, and they work perfectly. I plan to order more soon for making bigger batches!
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Bath Fizzies & Salts
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Durability
• Size
Anita • California

Date Submitted:  03/29/2016

I Recommend This Product!
"Perfect Thickness"
COMMENTS:  I just used this to make my Loofah scrub soaps. The thickness, size, and weight of the soap turned out perfect and so professional! This is a high quality silicone mold. It was easy to pop out the soap and easy to clean! A+
PRODUCT USED IN:   Soap - Melt & Pour
Sandra • Florida

Date Submitted:  03/19/2016

I Recommend This Product!
"Love this mold!"
COMMENTS:  I have purchased this mold a couple of times and have not been disappointed. It's the perfect size, strong, sturdy, easy to unmold and easy to clean. I use this mold for m&p soap and bath fizzies. Couldn't ask for a better mold!
PRODUCT USED IN:   Soap - Melt & Pour, Bath Fizzies & Salts
sylvie • New Jersey

Date Submitted:  03/14/2016

I Recommend This Product!
"Soap Mold"
COMMENTS:  One of my favorite soap molds. Makes perfect size bars. I have bought these a couple of times and intend to buy more in the future.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
Marina • Illinois

Date Submitted:  03/04/2016

I Recommend This Product!
"Easy to use!"
COMMENTS:  The silicon molds are definitely the way to go with the CPOP soaps! Easy to use, easy to clean! I will be buying again!
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP
Andrea • North Carolina

Date Submitted:  03/03/2016

I Recommend This Product!
"Easy release for soap and lotion bars"
COMMENTS:  I bought this mold for my 4 oz. lotion bars that I place in a flat tin. Easy release and clean up is a breeze. Also started making soaps in these, will be purchasing more!
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Lotion Bars & Sticks
Deborah • Illinois

Date Submitted:  02/29/2016

I Recommend This Product!
"Always excellent quality."
COMMENTS:  All of my favorite soap molds are the CC brand. Very strong and hold their shape.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
Pamela • Ohio

Date Submitted:  02/05/2016

I Recommend This Product!
"Love this mold"
COMMENTS:  Use this mold to make my luffa soap, and they came out amazingly easy. Can't wait to make more soap with.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Flexability
• Easy to unmold
Beverly • Washington

Date Submitted:  01/30/2016

I Recommend This Product!
"Very durable "
COMMENTS:  I love this soap mold. It's well made and the perfect size for a smaller size soap bar
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Well made
• Good size
• I wish these came in a two pack
• Lower price
Stephanie • Michigan

Date Submitted:  01/26/2016

I Recommend This Product!
"Nice round bars"
COMMENTS:  Produces nice round bars. Thus far, I've been using this mold when I have more soap than fits in my loaves.
PRODUCT USED IN:   Soap - Cold Process
Katherene • California

Date Submitted:  01/08/2016

I Recommend This Product!
"Great circle mold"
COMMENTS:  Just got the mold today. I love silicone molds. Will be making the calendula soap this weekend. So excited. :-)
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Great mold
Carrie • Virginia

Date Submitted:  01/03/2016

I Recommend This Product!
"Great Mold!"
COMMENTS:  This mold is perfect for my loofah soaps! The soap is easily unmolded and it is a great quality mold! I bought 1 and loved it so much I bought 4 more!
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Size
• Price
• Quality
Sandi • New Mexico

Date Submitted:  12/18/2015

I Recommend This Product!
"Good Quality"
COMMENTS:  I wish it were larger
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
Jaazia • Mexico

Date Submitted:  12/10/2015

I Recommend This Product!
"Silicone Molds are great for MP Soap"
COMMENTS:  I liked this mold very much, so easy to unmold and perfect size, I used most of the time for embed personalized designs with water soluble paper.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Size
• Shape
kelli • California

Date Submitted:  11/29/2015

I Recommend This Product!
"Basic round silicone mold"
COMMENTS:  I am so pleased with this mold!! It seems like such a simple thing, what you see is what you get but I was still surprised when I received it! It's deeper than I was expecting so it makes a perfect, smooth, large chunky bar. Even better, it is extremely easy to unmold both cold process soap and melt and pour. I made 3 batches of cold process yesterday and I found this extremely helpful for the small amounts of soap batter left. I love this mold!
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
Ashana  • Pennsylvania

Date Submitted:  11/18/2015

I Recommend This Product!
"Nice Mold"
COMMENTS:  Makes nice round soaps. I sell out every time I make soaps with the mold. Perfectly round! Takes 2lbs of MP to create 6 bars.
PRODUCT USED IN:   Soap - Melt & Pour
Julie • New York

Date Submitted:  10/31/2015

I Recommend This Product!
"Professional look"
COMMENTS:  I have started using this mold exclusively for my facial bars. They really looK professional and I am loving my round facial bars!
PRODUCT USED IN:   Soap - Cold Process
Richard  • Tennessee

Date Submitted:  10/26/2015

I Recommend This Product!
"LOVE IT"
COMMENTS:  This was just what I was needing
PRODUCT USED IN:   Soap - Melt & Pour
Jamie • South Carolina

Date Submitted:  10/21/2015

I Recommend This Product!
"Easy to use "
COMMENTS:  Easy to use, perfect for popping out melt and pour soap bars with ease. Would recommend and will use all the time.
PRODUCT USED IN:   Soap - Melt & Pour
LaDonna • Kentucky

Date Submitted:  10/07/2015

I Recommend This Product!
"Love to make loofah soaps with this mold"
COMMENTS:  The cut loofah's work great in this mold and my customers love them !
PRODUCT USED IN:   Soap - Melt & Pour
Lui • Singapore

Date Submitted:  09/18/2015

I Recommend This Product!
"Great Mold"
COMMENTS:  Good to use and unfolding the soap was easy.
PRODUCT USED IN:   Soap - Melt & Pour
Sara • Iowa

Date Submitted:  09/11/2015

I Recommend This Product!
"Great mold!"
COMMENTS:  I love all of the Crafter's Choice silicone molds. This one is no exception!
PRODUCT USED IN:   Soap - Melt & Pour
Nora • Pennsylvania

Date Submitted:  09/09/2015

I Recommend This Product!
"silicone mold"
COMMENTS:  This mold worked great for my loofah soaps. They are the perfect size and they come clean.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• size
Deana • California

Date Submitted:  09/04/2015

I Recommend This Product!
"Silicone Mold Round"
COMMENTS:  I love this mold. It makes nice round soaps and unmolds very nicely.
PRODUCT USED IN:   Soap - Melt & Pour
Rebecca • New Jersey

Date Submitted:  08/18/2015

I Recommend This Product!
"Excellent for Duck Soaps"
COMMENTS:  I love this mold. I used it for my "duck soaps" and they look awesome!!! Very easy to unmold which was great!
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Very easy to use
• Soaps came out great
Lynne • New Mexico

Date Submitted:  08/07/2015

I Recommend This Product!
"Dual purpose mold"
COMMENTS:  This mold is great for making all kind of soaps, from childrens duckie soaps to regular bath soaps. I purchased this with the mold kit but will be ordering more molds individually.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Multi-use
• nothing
Brenna • Kansas

Date Submitted:  07/28/2015

I Recommend This Product!
"Excellent"
COMMENTS:  One of my favorite mold's, use it all the time.
PRODUCT USED IN:   Soap - Cold Process
Erin • British Columbia

Date Submitted:  07/13/2015

I Recommend This Product!
"Still going strong!"
COMMENTS:  I ordered this mold over a year ago. It gets used very regularly in my house, and hasn't shown any signs of slowing down. I love it so much, I think I need another!
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Very Flexible
Ashley • Pennsylvania

Date Submitted:  07/02/2015

I Recommend This Product!
"Round Basic Silicone Mold 1602 "
COMMENTS:  WOW! I love these molds. They are perfect for lotion bars. Also awesome when you have soap left over after filling a loaf.
PRODUCT USED IN:   Lotion Bars & Sticks
Sue • Georgia

Date Submitted:  07/01/2015

I Recommend This Product!
"Tomato Loofah M&P Soaps"
COMMENTS:  Worked perfectly to fit the 10" loofah in for the tomato soap slices.
PRODUCT USED IN:   Soap - Melt & Pour
Brandy • Alabama

Date Submitted:  06/10/2015

I Recommend This Product!
"I love this mold!"
COMMENTS:  This mold is very useful in making shaving pucks for men! Highly recommended!
PRODUCT USED IN:   Soap - Cold Process
tammie • Ohio

Date Submitted:  06/04/2015

I Recommend This Product!
"easy to use"
COMMENTS:  Very easy to use.
PRODUCT USED IN:   Soap - Melt & Pour
Jamie • Arizona

Date Submitted:  05/29/2015

I Recommend This Product!
"A Favorite Mold"
COMMENTS:  This mold is super easy to unmold MP soap from and turned me into a round soap fan. I love that you get a nice solid 5 oz bar from the mold.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Large 5 oz bars
• Ease
• NOthing
Conrad • Colorado

Date Submitted:  05/22/2015

I Recommend This Product!
"Awesome"
COMMENTS:  Works great and releases the soap very easily.
PRODUCT USED IN:   Soap - Melt & Pour
Jennifer • New York

Date Submitted:  05/19/2015

I Recommend This Product!
"Perfect for a good full size bar"
COMMENTS:  This mold is a great addition to our set. Nice full size bar that is easy to hold. This works great with the pre- cut lufas.
PRODUCT USED IN:   Soap - Melt & Pour, Exfoliants & Sugar Scrubs
Constance Morris • Pennsylvania

Date Submitted:  05/02/2015

I Recommend This Product!
"Nice basic mold."
COMMENTS:  This mold is primarily used by us for the duckie M&P soap. We plan to use it in CP with imbeds.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Ease of use
• Soap releases easily
• Great for decorating
Robyn • Rhode Island

Date Submitted:  04/21/2015

I Recommend This Product!
"Round Basic Silicone Mold"
COMMENTS:  I use my round molds every time I soap! I just love them. Soap releases easily.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Quality
• Nothing
Maria  • Georgia

Date Submitted:  02/22/2015

I Recommend This Product!
"Great product"
COMMENTS:  These were so easy to use and clean. The soap just popped out when it was ready.
PRODUCT USED IN:   Soap - Cold Process
Lisa • Oklahoma

Date Submitted:  02/09/2015

I Recommend This Product!
"Perfect Size"
COMMENTS:  This is my favorite mold! It is a great size and the soap pops out easily.
PRODUCT USED IN:   Soap - Melt & Pour
Ann Marie • California

Date Submitted:  01/30/2015

I Recommend This Product!
"sturdy, quality mold"
COMMENTS:  this is a fantastic mold, easy to work with, and durable. It is great for my luffa soaps and shaving soaps.
PRODUCT USED IN:   Soap - Melt & Pour
YTS • Texas

Date Submitted:  01/29/2015

I Recommend This Product!
"I love it for special recipes"
COMMENTS:  I like to use this kind of mold for special soaps. In my case I use this one for facial bars.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process, Soap - Shampoo Bars, Soap - Shave Shampoo, Lotion Bars & Sticks
Richard • Nevada

Date Submitted:  01/28/2015

I Recommend This Product!
"Nice product"
COMMENTS:  Happy with this purchase. Makes great size bars, although they didn't come out to be 5oz. A bit hard to unmold even after soap has completely hardened. The bottom of the mold is wider than the top so when pushing the bar out it gets a bit squished.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• size
• durability
• unmolding due to shape
stockdiva • Georgia

Date Submitted:  01/16/2015

I Recommend This Product!
"Love this mold"
COMMENTS:  I have nearly 8 of these molds and I love them. They are great size to make shaving soaps. The molds are very sturdy as well.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• The size
• Sturdy molds
• Easy to clean
Holly • Oklahoma

Date Submitted:  01/08/2015

I Recommend This Product!
"Perfect Mold !!!"
COMMENTS:  I use this mold to make "pill" shaped bath bombs as well as round shave soaps. Perfect size, perfect depth, perfect amount....love this mold !!!
PRODUCT USED IN:   Soap - Melt & Pour, Bath Fizzies & Salts
kathy • South Carolina

Date Submitted:  01/05/2015

I Recommend This Product!
"great mold"
COMMENTS:  I love the size of this mold. It makes the perfect HP soap cake.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process, Soap - Shave Shampoo
Krista • California

Date Submitted:  12/28/2014

I Recommend This Product!
"Easy to unmold"
COMMENTS:  I love this silicone mold. It is super easy to unmold my soap and the size is perfect!
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• size, round soap
• easy to unmold
Heather • Florida

Date Submitted:  12/04/2014

I Recommend This Product!
"Love these"
COMMENTS:  I use these mostly for luffa embedded soaps and salt soaps. They make perfect smooth round soaps. I love these for salt bars. Removal is tricky at first but gets easier with use.
PRODUCT USED IN:   Soap - Cold Process, Soap - CPOP, Soap - Hot Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Nice consistent size and smooth soap
• more space between cavities
jeff • Florida

Date Submitted:  12/02/2014

I Recommend This Product!
"round silicone mold"
COMMENTS:   THIS MOLD DID A REALLY GOOD JOB FOR OUR MELT AND POUR SOAPS. AS WITH OTHER CRAFTERS CHOICE MOLDS IT WAS VERY PLIABLE AND ALWAYS RETURNED TO THE ORIGINAL SHAPE AFTER UN-MOLDING. A VERY SMOOTH FINISH WAS LEFT ON THE OUTSIDES OF OUR SOAP AND COMPLEMENTS WERE MADE OF HOW NICE OUR SOAP LOOKED. I WOULD BUY AGAIN IF MORE MOLDS WERE REQUIRED. I WAS ABLE TO BARELY SQUEEZE INTO A 4X6 SHRINK BAG, SO A 6X6 WOULD BE FINE TO USE.
PRODUCT USED IN:   Soap - Melt & Pour
Barbara • Ohio

Date Submitted:  11/22/2014

I Recommend This Product!
"Love my new molds!!"
COMMENTS:  Makes cute round bars that are smooth and pop right out of the mold. Cleans up easy too.
PRODUCT USED IN:   Soap - Cold Process, Soap - CPOP
Suzanne • Tennessee

Date Submitted:  11/14/2014

I Recommend This Product!
"Great mold!"
COMMENTS:  Love this mold! It makes a beautiful soap bar....a little extra touch from a square bar. It is a perfect size also. I made lavender scented soap with lavender buds in it. They look great!
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Perfect size
• Soap unmolds very easily
• Nothing
Brandon • New Mexico

Date Submitted:  11/09/2014

I Recommend This Product!
"Perfect Size and easy to use"
COMMENTS:  These silicone molds are so easy to use. They make a perfect product every time! I absolutely love them. Great for those specialty soaps and shave pucks. Buy several and it can make your production work so much easier.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Shave Shampoo
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Easy to use
• Perfect product every time
Jecci • Ohio

Date Submitted:  10/27/2014

I Recommend This Product!
"Great for shaving soap pucks"
COMMENTS:  I use this mold to make shaving soap. Soap unmold very easily every time. These soaps fit in the 8oz. low profile plastic jar.
PRODUCT USED IN:   Soap - Cold Process, Soap - Shave Shampoo
Home • California

Date Submitted:  10/22/2014

I Recommend This Product!
"Great Mold "
COMMENTS:  I love this mold! I received it in the Calendula Sun M&P kit. It is a great mold for the price, and it is durable as well. My soaps released easily, and each mold makes a decent sized bar of soap. I plan on using it for my cold process soaps as well.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Price
• size
• materials (silicone)
belinda • New Hampshire

Date Submitted:  10/19/2014

I Recommend This Product!
"Works great"
COMMENTS:  I use this mold over and over for my loofah soaps. All of my molds are from WSP and work great.
PRODUCT USED IN:   Soap - Melt & Pour
Sybella • Massachusetts

Date Submitted:  10/10/2014

I Recommend This Product!
"great soap"
COMMENTS:  This is a great mold, easy to work with, love the silicone soap molds. I wish they made this is 3 and 4 ounce size. Works great for the rubber ducky soaps!
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• quality
• ease of use
• more sizes
Sarah • Oregon

Date Submitted:  10/07/2014

I Recommend This Product!
"Easy to use"
COMMENTS:  Very easy to pop out soap when done!
PRODUCT USED IN:   Soap - Melt & Pour
Suzanne • Pennsylvania

Date Submitted:  10/02/2014

I Recommend This Product!
"Makes a Nice Bar"
COMMENTS:  I like using this mold for my "men's" scents! I think it's a great option for when you are differentiating between men's and ladies scents!
PRODUCT USED IN:   Soap - Melt & Pour
Samantha • Georgia

Date Submitted:  09/30/2014

I Recommend This Product!
"Amazing"
COMMENTS:  Great durability, and the perfect size for face scrubbies and lotion bars. I love it!
PRODUCT USED IN:   Exfoliants & Sugar Scrubs, Face Care, Lotion Bars & Sticks
Jessica • California

Date Submitted:  09/29/2014

I Recommend This Product!
"Perfect for luffa"
COMMENTS:  I bought this mold specifically to made luffa pedicure soaps and was 100% satisfied! It's the perfect size and the bars come out very easily. It's a great size for facial bars as well.
PRODUCT USED IN:   Soap - Melt & Pour
Stacey • Minnesota

Date Submitted:  09/23/2014

I Recommend This Product!
"best round mold out there"
COMMENTS:  This is with out a doubt the best round mold out there. Sturdy and flexible with shiny finish. Great for my pedi bars!
PRODUCT USED IN:   Soap - Melt & Pour
Jenny • Michigan

Date Submitted:  09/22/2014

I Recommend This Product!
"Used for my excess"
COMMENTS:  I use this mold to make guest soaps with my leftover CP soap batter. The product comes right out and it's so easy to clean up.
PRODUCT USED IN:   Soap - Cold Process
James • Oklahoma

Date Submitted:  09/21/2014

I Recommend This Product!
"Great Deep mold"
COMMENTS:  I love this mold and it is very high quality. Seems a little stiff at the beginning maybe that will fix with time. I lov these molds.
PRODUCT USED IN:   Soap - Melt & Pour
JENNIFER • Texas

Date Submitted:  09/16/2014

I Recommend This Product!
"Plain & basic!"
COMMENTS:  Plain & basic, no frills...great for a men's set or for shaving pucks. Mold is a bit stiff, I had issuing getting my MP pucks out of the mold even after freezing for 3hrs.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - Shave Shampoo
FRANCIS  • Arizona

Date Submitted:  09/11/2014

I Recommend This Product!
"great for loofah soaps"
COMMENTS:  I love it! so easy to remove my loofah soaps from it. Definitely will be buying more.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - Shampoo Bars
Cheryl • Florida

Date Submitted:  09/05/2014

I Recommend This Product!
"excellent results"
COMMENTS:  This mold is very sturdy and makes a nice disk like soap.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - CPOP
Anthony • West Virginia

Date Submitted:  07/19/2014

I Recommend This Product!
"works great"
COMMENTS:  Easy to unmold, nice and heavy. I love this mold and would love a couple more soon
PRODUCT USED IN:   Soap - Melt & Pour
Sharon • Ohio

Date Submitted:  06/30/2014

I Recommend This Product!
"Easy to use."
COMMENTS:  Just purchased and love it after the first use. Very easy to unmold and very versital. Beautiful finished product.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Easy to use
• Perfect size