Activated Charcoal Cold Process Soap Loaf for Beginners Recipe

Prepare the lye solution by weighing the water and lye in two separate containers. Pour the lye into the water, carefully mix in a well-ventilated area and set aside to cool while you prepare your oils.

Measure the oils and butters in the microwave-safe container and melt in the microwave. Set aside.

In plastic beaker measure out fragrance oil and add activated charcoal. Mix together and set aside.

When both the lye mixture and the oils are 120°F or below, carefully pour the lye mixture into the oils.

Stick blend until you reach a light trace. Add the fragrance/charcoal mixture and mix with spatula by hand or with a few short bursts of the stick blender.

Pour the soap batter into the mold and tap the mold on the counter to release any air bubbles. Using a spoon or spatula, texture top as desired.

Allow to set at least 24 hours or longer until soap is firm enough to unmold. Remove soap from mold and slice into bars.

Let soap cure 4-6 weeks. Package and label accordingly.