Lavender & Peach Tri-Color Bath Fizzies Recipe

Separate the 7 sets of bath bomb ball molds with the corresponding tops and bottoms. Set aside.

Weigh out the 18 oz. of Citric Acid and place in one bowl.

Add the 37 oz. of Baking Soda and mix together with a wire whisk.

FOR THIS NEXT STEP WE RECOMMEND WEARING A MASK AS THE LATHANOL POWDER IS VERY FINE AND GETS AIRBORNE QUICKLY.

Add 1 oz. of Lathanol Powder to the mixture and carefully blend in.

To a large bowl, place 1/2 of mixture. Into two smaller bowls, add 1/4 each of remaining mixture.

To the larger bowl, add purple powder and mix well with a wire whisk or gloved hands.

Leave one bowl white and to the 3rd bowl add orange powder color and mix well.

Measure 0.50 oz. of Lavender & Peach Fragrance Oil into a plastic beaker. Using a plastic dropper, drizzle the fragrance among the 3 bowls. Mix the fragrance in well, either with a whisk or gloved hands.

Begin to spritz the mixtures with alcohol, continuing until the mixture stays together when pressed into the palm of your hand.

Take some of the white mixture and pat down into one side of the mold. Next, add some orange and pat down firmly.

With the other side of the mold, add orange first, then white. This shoud be the opposite colors from the first mold.

Top each side off with the purple for the middle. Mound it up slightly so both sides will stick together.

Place the two halves together and press firmly so both sides stick together. You can remove the top of the mold, brush off any excess mixture around the edge and place back on. If top and bottom are not sticking together, spritz with more alcohol to help the sides adhere to each other.

Continue with the other bath bomb molds in this same manner or however you want to mix the colors for your bath fizzies.

Keep the fizzies in the molds overnight. If available, place on bubble wrap or egg carton to prevent flat bottoms.

Remove from molds and package as desired. You might place each in a cello bag tied with corresponding ribbon or wrap in colored tissue paper.

If you choose to keep the bath bomb in the mold and use as packaging, we recommend using the 135" x 55" shrink wrap band to secure both sides in place. This is applied around the entire bath bomb mold.

Label product accordingly.