We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Create aromatic cake slices that are actually good for you! Make soap versions of your favorite pies and cakes such as apple pie, key lime pie, cherry pie, birthday cake or cheesecake with this silicone mold.
Common Uses:
Melt & Pour Soap (MP). Cold Process Soap (CP). Cold Process Oven Process Soap (CPOP). Hot Process Soap (HP). Lotion Bars.
Points of Interest:
Maximum Temperature: 500ºF
Manufacturer: Crafter’s Choice®
Material: Silicone
Country of Origin: China
Country Of Origin: China
Helpful Product Information:
Style: Bar
Avg. Bar Weight: 6 oz
Bar Cavities: 8
Bar Depth: 1.625"
Bar Length: 3.875"
Bar Width: 2.625"
Max Temperature: 500ºF
Mold Capacity (oz): 48
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: Bought this mold as a test for fancy FUN CP cake slices. And I was amazed at the quality of the silicone., how easy they were to take out if the mold and even easier to clean! WIN WIN WIN!!! So now I use it to make Signature Cake Soaps for my storefront soon to open in Spring ‘22
But it, you will love it!!!
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Easy to clean • Easy to unmold • Great quality silicone
• Nothing!
Ginger • Kentucky
Date Submitted: 02/06/2018
I Recommend This Product!
"Cake mold"
COMMENTS: Great
PRODUCT USED IN: Soap - Melt & Pour
Laurie • New Mexico
Date Submitted: 09/12/2017
I Recommend This Product!
"Love This Mold"
COMMENTS: I started making MP pie slices and frosting them with Debbie May's best frosting recipe. I can't keep up with the demand! Sells like crazy! I make Margarita Lime Pie, Lemon, Raspberry and more! Turns out so cute. Looking forward to making pumpkin pie this fall. My finished product is about 6 ounces.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Size and shape of pie/cake • easy to pop out of mold
• nothing
Hartence • New Jersey
Date Submitted: 09/01/2017
I Recommend This Product!
"Life like pie slices! "
COMMENTS: I have two of these molds now. It releases very easily. The slices look sooo real! I made two sets of pie soaps, one strawberry scented and one bakery scented. Everyone's first thought upon seeing the pie soaps is desert and upon smelling it, yum!
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Releases great!! • Size of pie slices - fantastic
Cassandra • Indiana
Date Submitted: 07/08/2017
I Recommend This Product!
"8 piece soap molds"
COMMENTS: I love these molds. I use them to make cake candles with a huge scoop of ice cream. They work great for me. I purchased several for candles wax and will be purchasing again for new ones to make soap cakes. LOVVVVVE THEM!!!
PRODUCT USED IN: Candles - Soy
Christine • Wyoming
Date Submitted: 05/25/2017
I Recommend This Product!
"Cake Slice Mold"
COMMENTS: Love this mold. Have tried making a cake before but found I couldn't cut it even. This made my life much easier. Now every cake slice comes out perfect. I have found that I need to let it sit an extra day before unmolding but other than that, very pleased with it.
PRODUCT USED IN: Soap - Cold Process
Etosha • Georgia
Date Submitted: 01/18/2017
I Recommend This Product!
"TOOOO BIGGG"
COMMENTS: This Mold is HUGE! I thought I could add small triangle slices to my soaps NO! this is a Slice of Cake...
PRODUCT USED IN: Soap - Melt & Pour
Christina • Florida
Date Submitted: 12/24/2016
I Recommend This Product!
"Great mold very strong "
COMMENTS: Works great for fancy pie soap
PRODUCT USED IN: Soap - Cold Process
Diane • Missouri
Date Submitted: 12/04/2016
I Recommend This Product!
"This is awesome!"
COMMENTS: Use this to make slices of pie and cake
PRODUCT USED IN: Soap - Melt & Pour
Tiffany • Missouri
Date Submitted: 12/01/2016
I Recommend This Product!
"Perfect Size"
COMMENTS: Very easy to use, made perfect size pie/cake sliced M&P.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Ease of use
Dawn • Washington
Date Submitted: 11/14/2016
I Recommend This Product!
"This was very fun"
COMMENTS: I did some pie scents and used this mold and it was very fun to do and see the results.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
Jenia • South Carolina
Date Submitted: 11/08/2016
I Recommend This Product!
"Nice and sturdy"
COMMENTS: Great little pieces of cake ! Pretty sturdy but does warp slightly in hot process and bulge out on sides ! Still nice!
PRODUCT USED IN: Soap - Hot Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Nice • Great cakes
• Make more sturdy
marc • Colorado
Date Submitted: 10/03/2016
I Recommend This Product!
"Silicone Cake Soap"
COMMENTS: Awesome for making apple pie soaps that look like slices of PIE!
PRODUCT USED IN: Soap - Cold Process
Marcella • Pennsylvania
Date Submitted: 09/23/2016
"Love The Shape But Very Flimsy"
COMMENTS: I love the shape of the mold but found it to be very thin and flimsy, very unlike the other crafter's choice molds I have. I don't know if I would by this type again for the price.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Shape • Size
• Silicone is very, very, very thin
Janice • New Jersey
Date Submitted: 06/18/2016
I Recommend This Product!
"Buy One"
COMMENTS: Just made lemon meringue pie slices, cold process and they look just like the real pie. The mold releases easily and cleanly. I will find many uses for this mold.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Easily release • Love the size of the slices • Realistic
• None
lovetosoap • Utah
Date Submitted: 05/07/2016
I Recommend This Product!
"Gah!! My new favorite!"
COMMENTS: I have been waiting to purchase this mold, and I finally did so as a present to myself for Mother's Day when I saw molds were on sale. It's very durable and has nice sized cavities. I can't wait to use it.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Good quality • Good size
Angela • West Virginia
Date Submitted: 03/02/2016
I Recommend This Product!
"So Cute"
COMMENTS: This mold is so easy to use and makes the cutest little soaps.
PRODUCT USED IN: Soap - Melt & Pour
Kat • Maryland
Date Submitted: 12/01/2015
I Recommend This Product!
"I love this mold "
COMMENTS: I love this mold it makes my soaps look like little slices of yummy pies that I can decorate different each time.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Ease of use • Perfect shape
• nothing
tammie • Alabama
Date Submitted: 10/27/2015
I Recommend This Product!
"My Daughter thinks I am a Superhero "
COMMENTS: I just used this cake mold and my soap came out wonderfully. My daughter once thought that Bath and Body Works and those other big names companies was the best until I start using WSP products. WSP makes my products look so cute, fun, and professional and that is why I love this company. I love using this mold,I had trouble making and cutting my cake using traditional molds, by using this mold, my cake out prefect size and I am happy. My daughter came down stairs and saw my cake soap, and she smiled and said, mother I sure do love you. I was happy to hear that because we know when some of our children reach a certain age, we barely hear that from our children. I thank you, WSP, for doing another great job and helping me turn my products out the way that I want them to be. :) best wishes to you.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
Pamela • Florida
Date Submitted: 09/03/2015
I Recommend This Product!
"Love it!"
COMMENTS: I have so enjoyed this mold. It is wonderful. I am a huge fan of the silicone and this is nice for a small wedge or you can make a bunch. The corners unmold smooth and slightly rounded which I really like. You are able to see through it some to pour layers, great size
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• silicone molds • great size • see through
Lindsay • Texas
Date Submitted: 08/18/2015
I Recommend This Product!
"Great mold!"
COMMENTS: Cake, pies, you name it! I had to have this mold for the holidays. Pumpkin Pie, Cheesecake, Red Velvet Cake.. so much fun to be had! Just make sure you leave it in the mold longer then normal. Don't want to dent or smoosh your slices!
PRODUCT USED IN: Soap - Cold Process
YTS • Texas
Date Submitted: 08/16/2015
I Recommend This Product!
"I love these molds!"
COMMENTS: I love these molds!
PRODUCT USED IN: Soap - Cold Process
Lisa • Virginia
Date Submitted: 08/10/2015
I Recommend This Product!
"Soap Artisan Must Have"
COMMENTS: This is awesome and It opened my mind to an entire new product line, I also use CC bath whip to finish many pies with a dalop of bath whip to look like whip cream.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• new product line for me • pre-sliced
L. • Florida
Date Submitted: 06/07/2015
I Recommend This Product!
"Love this Mold!!"
COMMENTS: I used this to make a cheesecake slice soap. It came out perfect. The soap was easy to release from the mold however it did take a bit more time than usual to harden up.
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Retired Soap Molds
