We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Queen Victoria was such a fan of carved cameo jewelry that she inspired a mass-produced cameo trend by the second half of the 19th century. The richly detailed Guest Cameo Soap Mold depicts a striking Roman woman in a beautiful frame.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Country Of Origin: United States
Helpful Product Information:
Material: Plastic
Style: Bar
Avg. Bar Weight: 1.75 oz
Bar Cavities: 5
Bar Depth: 1"
Bar Length: 2"
Bar Width: 1.75"
Max Temperature: 145ºF
Mold Capacity (oz): 8.75
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: A lot of people here love the little soap this mold makes... however I have a hard time with the unmolding. So I took some coconut oil and covered the inside of my mold with it just before use. I love it.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Size: little wider little shallower
Emily • Ohio
Date Submitted: 02/13/2015
I Recommend This Product!
"Just like the jewelry"
COMMENTS: I pour the face white and then backfill with orange, blue, lavender, lime-even black and they sell like "hotcakes". Customers love the look of old jewelry and comment on a memory it brings back to them. I had to buy another tray of molds to enable me to fill orders coming in. Even though I don't like plastic molds, this one is well worth the small effort to release them.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• easy to unmold for a plastic • detail of face is remarkable
• nothing
Cynthia • California
Date Submitted: 01/13/2015
I Recommend This Product!
"Beautiful & so Feminine. "
COMMENTS: I love the results obtained from this mold. The details are excellent. I made MP soaps in 4 different floral fragrances with four different pastel shades and packaged them in a set. To accentuate the details I used a very thin light gold mica wash with a paintbrush and placed them in a see-through box with tissue paper and each soap in its own pastel cupcake liner. 8 oz. of soap base produced 5 cameos so I was able to make 5 boxed sets of 4 soaps each with 2.5 lbs. of soap. If there is soap left after pouring the cameos I make small sample soaps. At first it can be tricky to push out the middle cameo, even after spritzing liberally with Rubbing alcohol. I suggest letting the soap harden longer or pop in the freezer for a few mins. so the soap is easier to pop out. This design is so beautiful and Victorian-style. Everyone loves the soap made from this mold.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Design • Cam make 5 soap with 1/2 lb. Base • Detailing
• Make it easier to pop out middle soap.
Sharon • Nevada
Date Submitted: 10/15/2014
I Recommend This Product!
"Cameo Soap Mold "
COMMENTS: Took time to get the soaps out of the mold due to the small size, but was well worth it. Soaps are very beautiful. Artistic attention to detail. Soaps weighed in at 1.5 ounce each.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Artistic Detail • Catches the customer's eye
• Nothing
Timothy • West Virginia
Date Submitted: 09/07/2014
I Recommend This Product!
"Wonderful!!"
COMMENTS: I love this mold have a lot of people buying this!!! Definitely need another!!
PRODUCT USED IN: Soap - Melt & Pour
Linda • North Carolina
Date Submitted: 03/03/2014
I Recommend This Product!
"Makes a beautiful design"
COMMENTS: These soaps look like real cameos. This makes a beautiful design. I had a little difficulty removing the soaps from this mold but think that was due more to the base I was using. Enjoy working with Milky Way molds.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Beautiful design • Easy to work with • Easy to clean
Shannon • Nevada
Date Submitted: 12/27/2013
I Recommend This Product!
"beautiful"
COMMENTS: This mold produces such beautiful cameo soaps. It is a big hit, I get requests for cameos all the time now.
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Molds By Material
Retired Soap Molds
