Milky Way™ Floral Ovals Soap Mold (MW 74) - Wholesale Supplies Plus
Current Processing Times: 3-5 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Flowers - (You Are Here - P9763)

Milky Way™ Floral Ovals Soap Mold (MW 74)


Additional Information
The Floral Ovals Soap Mold features three Art Nouveau-inspired designs with stunning detail that will bring the garden inside.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 3.75 oz Bar Cavities: 3
Bar Depth: 1.125" Bar Length: 3.5"
Bar Width: 2.5" Max Temperature: 145ºF
Mold Capacity (oz): 11.25

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below

Q Bubble
Posted By: Shelley   |   June 19, 2014

"What are the measurements on these? I need them to fit in a 2.75" lotion bar tin. Would they? Thanks!"

Recipes & Videos (1)
CustomerReviews (5)
Submit A Rating Average Customer Rating: (5 Reviews)

Renee • South Carolina

Date Submitted:  01/27/2016

I Recommend This Product!
COMMENTS:  Makes beautiful soap bars. Wonderful and clear details. Perfect for floral scents!
PRODUCT USED IN:   Soap - Melt & Pour
Leah • Kentucky

Date Submitted:  12/30/2014

I Recommend This Product!
COMMENTS:  Another wonderful mold if you are looking for crisp designs with little effort. For the price, these are of great quality and I have yet to have a batch not come out as I expected.
PRODUCT USED IN:   Soap - Melt & Pour
• Crisp design
• Price
Timothy • West Virginia

Date Submitted:  09/13/2014

I Recommend This Product!
"Great Product!"
COMMENTS:  I love these for my mp soap, makes a great gift set. Very popular mold I'm glad I got it!!
PRODUCT USED IN:   Soap - Melt & Pour
Charlotte  • Tennessee

Date Submitted:  07/05/2014

I Recommend This Product!
"Floral Ovals Mold"
COMMENTS:  I made salt bars using these molds & they turned out great. They were very detailed, the flowers are gorgeous. I'm sure it wouldn't be as easy with regular CP soap, but the salt bars just popped out. I did coat the cavities with mineral oil.
PRODUCT USED IN:   Soap - Cold Process
Natalie • Texas

Date Submitted:  02/01/2014

I Recommend This Product!
"so pretty"
COMMENTS:  I made lotion bars with this mold and they are so pretty. They are just the right size for holding in your hand and the details are crisp and clear. I think these will be a big seller for me this season.
PRODUCT USED IN:   Lotion Bars & Sticks
Customer Photos (0)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved