Visit Us – Pick Up Orders Save 10% (Read More)
Lead Times 1-3 Business Days FREE SHIPPING ~ On Orders Over $25*
 
 
Wholesale Supplies Plus
0
 
   
 
 
 
Molds All Molds Goat & Goat Milk - (You Are Here - P6186)

Milky Way™ Goat Milk Soap Mold Tray (MW 21)

Pricing
$9.56 for 1 Mold
$41.25 for 5 Mold
$95.95 for 20 Mold
$385.70 for 150 Mold



Additional Information
What better way to advertise the special ingredient in your goat milk soaps than by letting folks read GOAT MILK right on the bar? The Goat Milk Soap Mold Tray also has a simple floral border and makes eight rectangular bars.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Tray
Avg. Bar Weight: 4 oz Bar Cavities: 8
Bar Depth: 1.25" Bar Length: 4"
Bar Width: 2" Max Temperature: 145ºF
Mold Capacity (oz): 32



This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.

Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (3)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 3 Question(s) Shown Below



Q Bubble
Posted By: Steve   |   November 08, 2019

"The directions say to use cooking spray to the mold. Yet, in the Q&A, the rep of the company says DO NOT use cooking spray. Which is correct?"




Q Bubble
Posted By: amy   |   January 15, 2016

"I cant seem to find soap boxes to fit this mold size? Do you sell them?"




Q Bubble
Posted By: Kevin   |   June 24, 2014

"Just made a batch of cold process soap in these molds and it is not unmolding easily at all. It's been sitting in there three days - and it is relatively hard. Should I try putting it in the freezer? Any other suggestions?"


Recipes & Videos (1)
CustomerReviews (23)
Submit A Rating Average Customer Rating: (23 Reviews)



BRENDA • Michigan

Date Submitted:  10/12/2019

I Recommend This Product!
"love this mold"
COMMENTS:  I have a few different molds, and this is my favorite. the soap comes out super easy and simply have to cut each soap from the block. so much easier than the loaf pans i have! my soap hardens faster in this one too so I can pop them out and cut within 12 hours
PRODUCT USED IN:   Soap - Cold Process
Gretchen • California

Date Submitted:  12/30/2018

"Good Product"
COMMENTS:  This mold is as it is described. I do wish the lines between each bar were more defined so the soap would make a clear break when using this mold.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Clear simple design
• A more defined break between each bar.
katherine • Michigan

Date Submitted:  11/02/2018

I Recommend This Product!
"Mold I always use"
COMMENTS:  These crack after a little bit but still my favorite molds. Wish they would make these same sizes in silicone because this is the size I always make in all my soaps unless I need a special order.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Please make in silicone
Joan • Nevada

Date Submitted:  06/30/2018

I Recommend This Product!
"goat milk soap mold"
COMMENTS:  Nice tray mold, easy to remove soap.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• soap mold easy to work with
nancy • Arizona

Date Submitted:  06/24/2018

I Recommend This Product!
"Goat Milk"
COMMENTS:  This tray is so good for my goat milk soaps. It not identifies that it is a goat milk product but it is a good size bar. My bars last 2 months. Heavy plastic that lasts a long time.
PRODUCT USED IN:   Soap - Hot Process
Ginger  • Kentucky

Date Submitted:  02/06/2018

I Recommend This Product!
"Mold"
COMMENTS:  Great!
PRODUCT USED IN:   Soap - Melt & Pour
Dana • North Carolina

Date Submitted:  11/08/2017

I Recommend This Product!
"My favorite mold"
COMMENTS:  I make a lot of goat milk soap and love that this mold is one piece. It makes a great presentation bar for the soap too. Will purchase more of these. Thanks WSP!
PRODUCT USED IN:   Soap - Melt & Pour
Leta • New York

Date Submitted:  07/01/2017

I Recommend This Product!
"Great product!"
COMMENTS:  It's so much easier to piur and cut than individual cavities.
PRODUCT USED IN:   Soap - Melt & Pour
Debi • Arkansas

Date Submitted:  04/18/2017

I Recommend This Product!
"Great molds"
COMMENTS:  I use these a lot and love them!
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Size
• Easy to use
• Stores nicely
Dvorak • Maryland

Date Submitted:  12/05/2016

I Recommend This Product!
"Great mold "
COMMENTS:  I love this mold as most of my soaps are made with goats milk. The soaps cone out nice and it's easy to read the letters and details even with a light colored soap. I only wish they made this in a silicone mold!
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Perfect soaps that look clean and sharp
• PLEASE MAKE A SILICONE MOLD
Robert • Kentucky

Date Submitted:  11/16/2016

I Recommend This Product!
"Soap mold "
COMMENTS:  This is a nice mold. I just wish that it could be made so you don't have to cut the bars yourself.
PRODUCT USED IN:   Soap - Melt & Pour
Diane • Missouri

Date Submitted:  09/29/2016

I Recommend This Product!
"Cute!"
COMMENTS:  Everybody loves goat's milk soap, and this mold
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Easy to use
Mary • Ohio

Date Submitted:  06/23/2016

I Recommend This Product!
"Love this"
COMMENTS:  I have several of these and have used them for years.
PRODUCT USED IN:   Soap - Melt & Pour
amy • Ohio

Date Submitted:  06/09/2016

I Recommend This Product!
"great!"
COMMENTS:  I have used this mold over and over, it has held up and I love it.
PRODUCT USED IN:   Soap - Melt & Pour
Nora • Arizona

Date Submitted:  04/26/2016

I Recommend This Product!
"Goats Milk soap mold tray"
COMMENTS:  Very easy to work with it, just wipe a little bit fractionated coconut oil to help unmold the batch
PRODUCT USED IN:   Soap - Melt & Pour
Amanda • New York

Date Submitted:  04/05/2016

I Recommend This Product!
"CP Goats Milk Soap"
COMMENTS:  Love this mold! It is so cute, and unmolded very easy!
PRODUCT USED IN:   Soap - Cold Process, Lotions, Creams & Butters
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• unmolded easy
• Cute design
Dawn • Minnesota

Date Submitted:  03/17/2015

I Recommend This Product!
"One of our favorite molds"
COMMENTS:  We have found that customers are attracted to our bar soap from this mold. I believe the proclamation that our handmade soaps have the goat milk as part of it is very intriguing to customers. They seem to like to share that information with others who visit their homes and use the soap.
PRODUCT USED IN:   Soap - Cold Process
Susan • Missouri

Date Submitted:  10/02/2014

I Recommend This Product!
"Great mold"
COMMENTS:  This is a great mold to use with goat milk MP soap. It unmolds easily after being in the freezer for a few minutes. I wish the soaps were a little larger, though. And it would be nice if they were separated. With this mold, they are all connected and you have to cut them. But it does make nice soaps and I'm very satisfied with the quality of the mold.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• larger soaps
• individual soap molds
1291 Washington Street • Pennsylvania

Date Submitted:  04/30/2014

I Recommend This Product!
"Simple"
COMMENTS:  Our customers love this classic, old school look to the Goats Milk Soap that we make. It gets the point across and still looks awesome when complete.
PRODUCT USED IN:   Soap - Melt & Pour
Taniece • Florida

Date Submitted:  02/23/2014

I Recommend This Product!
"Goat milk mold"
COMMENTS:  I love it. Easy for me to distinguish all my soaps.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• The lettering and design
constance • New York

Date Submitted:  01/22/2014

I Recommend This Product!
"Goat milk mold"
COMMENTS:  easily unmolds makes beautiful bars
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
Lloyd • Texas

Date Submitted:  12/18/2013

I Recommend This Product!
"Easy to Use"
COMMENTS:  This mold works very well with my melt and pour goat milk soap. I have not had any problems unmolding the soap with no broken pieces of soap
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• none
Dorothy • Wisconsin

Date Submitted:  11/06/2007

I Recommend This Product!
"Goat Tray Excellent!"
COMMENTS:  This tray is excellent and very easy to use.
PRODUCT USED IN:  Soap Products
Customer Photos (0)
Charts & Calculators
 
 
Stay updated on sales, new products, free recipes, and more.
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Coupons
Safe Sale Guarantee
Making Bulk Purchases
1-800-359-0944
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Site Feedback

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2020 Wholesale Supplies Plus, LLC - All Rights Reserved