Visit Us – Pick Up Orders Save 10% (Read More)
FREE SHIPPING ~ On Orders Over $25*
 
 
Wholesale Supplies Plus
0
 
   
 
 
 
Molds All Molds Bee & Honey - (You Are Here - P10443)

Crafters Choice™ Honeycomb Loaf Silicone Mold 1506

Pricing
$23.75 for 1 Mold
$101.17 for 5 Mold
$535.01 for 30 Mold (Bulk)



Additional Information
Create a honeycomb design on the top of your soap bars with this silicone mold! You can save your bubble wrap for packaging the cute honey inspired soaps you’ll create with this mold. The depth of the honeycomb design is roughly 1/8”.

Country Of Origin: China

Helpful Product Information:
Style: Loaf Bar Cavities: 1
Bar Depth: 2.5" Bar Length: 8"
Bar Width: 3.5" Max Temperature: 500ºF
Mold Capacity (oz): 44



This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap into silicone mold. Allow soap to cool at room temperature until hard. Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the loaf and carefully pull out of the mold. Slice into bars.

Cold Process Soap: Pour soap at trace into mold. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface or cookie sheet and gently push on the bottom of mold until the soap starts to release. Grab hold of the loaf with a gloved hand. Slice into bars and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Cold Process/Oven Process Soap: Pour soap at trace into the mold. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Slice into bars, and allow soap to cure for 2 to 4 weeks.

Hot Process Soap: Scoop hot process soap into mold. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove loaf from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the loaf and carefully pull out of mold. Slice into bars.

Care:
Hand wash mold in warm, sudsy water.
SDS & Documents
Questions & Answers (4)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 4 Question(s) Shown Below



Q Bubble
Posted By: tracie   |   June 13, 2018

"New to soap making and doing a melt and pour. Does this mold set alone or need a wood frame box? Thank you. "




Q Bubble
Posted By: Nicole   |   April 03, 2018

"Does this loaf mold hold 2 lbs when it's totally full of soap? I have a 4 lb. recipe and it's only filling one and a half of these molds... Should I not fill these all the way? "




Q Bubble
Posted By: Krystyna   |   April 26, 2016

"Is this made of silicone?"




Q Bubble
Posted By: Audriana   |   September 17, 2015

"Is the honeycomb embedding along the walls as well or just at the bottom?"


Recipes & Videos (3)
CustomerReviews (16)
Submit A Rating Average Customer Rating: (16 Reviews)



Tracy • Massachusetts

Date Submitted:  02/03/2019

I Recommend This Product!
"Love it"
COMMENTS:  I really like this mold and I anticipate that this soap will be an excellent seller
PRODUCT USED IN:   Soap - Cold Process
Lesa • Missouri

Date Submitted:  06/14/2018

"will not buy again"
COMMENTS:  the honeycomb is really tiny
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• nothing
• make honeycomb bigger
Theresa • Tennessee

Date Submitted:  04/28/2018

I Recommend This Product!
"Love it"
COMMENTS:  I love this one,it come out of the mold very easy.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• The shape
• Nothing
Dawn • California

Date Submitted:  04/15/2018

I Recommend This Product!
"love this honeycomb mold"
COMMENTS:  I just got this mold and used it in my honey and oat CP soap recipe. It turned out so nice! I love the honeycomb design and it was super easy to unmold. I'm dreaming of a bumble bee column mold to put down the center of this one. Wouldn't that be so perfect in the honey soap? The mold is very sturdy and holds it's shape great. The bars are nice and big. It makes me very happy.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• the honeycomb motiff
• easy to use
• sturdy and nice
• nothing
Tracy • Ontario

Date Submitted:  03/25/2018

I Recommend This Product!
"I love Love Love this soap mold!"
COMMENTS:  I use this for co soap and love the final look of my soaps.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Quality
• Nothing
patti • Pennsylvania

Date Submitted:  03/16/2018

I Recommend This Product!
"perfect top"
COMMENTS:  works great with my Oats and Honey soap
PRODUCT USED IN:   Soap - Cold Process
Destiny • New York

Date Submitted:  11/24/2017

I Recommend This Product!
"Leaves a nice impression!"
COMMENTS:  This soap mold leaves an excellent impression of honeycombs on melt&pour soap. It is very easy to unmold and the mold itself is well made. I absolutely love using it for my oatmeal soaps! I would recommend it to anyone who makes soaps!
PRODUCT USED IN:   Soap - Melt & Pour
DeShawn • Florida

Date Submitted:  01/18/2017

I Recommend This Product!
"What a cool mold"
COMMENTS:  This is a fun mold to get a new look for your soap. Works great, I've only used it with glycerin soap so not sure how the release would be with CP.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• look
• easy release
• nothing
Missy • Colorado

Date Submitted:  12/30/2016

I Recommend This Product!
"Love the look of this mold"
COMMENTS:  I really really like the look of this honey comb mold. Makes the soap look like it came from a honey comb!
PRODUCT USED IN:   Soap - Melt & Pour
Barbara • Oregon

Date Submitted:  09/30/2016

I Recommend This Product!
"Makes great soap for my OMH soap"
COMMENTS:  I make a Oatmeal, Goat Milk & Honey soap so I bought this mold. I like it ok but I think the bubble wrap method gave it more character
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• more like you used bubble wrap for the g
Home • Washington

Date Submitted:  09/09/2016

I Recommend This Product!
"Perfect for beeswax soap"
COMMENTS:  This mold makes a very realistic beeswax pattern on your soap, nothing like the bubble wrap technique. The silicone releases easily. I only wish it came in a longer size! The height and width are perfect, I just wish I could make more bars at once. A great mold!
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• pattern in realistic
• silicone releases easily
Krista • California

Date Submitted:  11/18/2015

I Recommend This Product!
"Honeycomb loaf mold"
COMMENTS:  I absolutely love the way this mold gives a honeycomb top to my soap. I have used this mold twice now, once using the Honey Bear FO from WSP and once using a Honey FO from a different supplier. I had much better results using WSP's Honey Bear FO...no acceleration and the soap unmolded perfectly! The other FO I used caused rapid acceleration and was a bit brittle when I unmolded...the delicate honeycomb top broke in a few places. Overall, I LOVE this mold and will only use it with my tried and true soap recipe using HOney Bear FO from WSP.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• the delicate honeycomb design
• easy to unmold
Katie • California

Date Submitted:  10/18/2015

I Recommend This Product!
"Cutest mold"
COMMENTS:  I used this for the first time yesterday and am pleasantly surprised! The honeycomb pattern is absolutely adorable. The impression came out clean without a single blemish and the pattern isn't as small as I expected based on other reviews here. I prefer this look to the bubble wrap look that is really common. Great mold, highly recommend!
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Sturdy
• Cute
• Easy to use
• Wish it came in larger size
Eileen • Pennsylvania

Date Submitted:  10/01/2015

I Recommend This Product!
"Love this!"
COMMENTS:  I am so happy with this mold. My honey soap came out so cute. One of the other reviewers said the honeycomb imprint was not very deep but to me they just are perfect! I would recommend this mold for honey soaps. They just come out beautiful!
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• ease of unmolding
• nothing
Dorene  • Georgia

Date Submitted:  09/24/2015

I Recommend This Product!
"Great Idea"
COMMENTS:  I like this mold. It is easy to use, released the soap wonderfully, sides & bottom were strong, honeycomb shapes were very noticeable, and the soap was lovely. I like the mold, but was a little disappointed in how small the shapes were, the descriptions did say 1/8", but I was thinking bubble wrap size (my fault). All in all, it is a very nice mold & I have used it twice. I just used the design on the bottom & put bubble wrap on top like always. Problem solved.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• thick
• easy release
• nice size bars that fit into hands
• larger design
Cathy • North Carolina

Date Submitted:  09/18/2015

I Recommend This Product!
"So Darn Cute!!!??"
COMMENTS:  I love this mold. After opening my box, I thought it was a very shallow honeycomb pattern. After unmolding my 1st batch of CP soap, I thought how cute is that. I will definitely be using these a lot. They are certainly not as deep as using bubble wrap, but still makes a very cute bar of soap. I had no trouble at all unmolding this loaf. I would definitely recommend these molds to anyone who loves making honeycomb soap.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• I love the honeycomb pattern.
• Ease of use.
• Easy unmolding & retains pattern.
Customer Photos (1)
Charts & Calculators
 
 
Stay updated on sales, new products, free recipes, and more.
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Free Shipping Program
Adding To An Order
Coupons
Safe Sale Guarantee
Making Bulk Purchases
1-800-359-0944
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Site Feedback

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2019 Wholesale Supplies Plus, LLC - All Rights Reserved