We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
The round Wax Tart Leaf Mold is used for making wax tarts for a potpourri or tart burner. When the scented tart heats up, it fills the room with aroma. The molds are also great for guest-sized soaps.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars. Wax Tarts.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC Plastic (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Country Of Origin: United States
Helpful Product Information:
Material: Plastic
Style: Bar
Avg. Bar Weight: 0.65 oz
Bar Cavities: 8
Bar Depth: 0.875"
Bar Diameter: 1.5
Bar Length: 1.5"
Bar Width: 1.5"
Max Temperature: 145ºF
Mold Capacity (oz): 5.2
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: These are the perfect size for facial steamers! The fizzies released easily from the mold. I just wish the tray were either slightly smaller, or there were more cavities in one since they don't fit on baking sheets very well, taking up a lot of counter space when using several at once. I love the simple leaf design and they're holding up well to use and washing!
PRODUCT USED IN: Bath Fizzies & Salts
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• simple leaf design • easy release • sturdy
• tray size
jennifer • New Jersey
Date Submitted: 08/10/2016
I Recommend This Product!
"good for sample size lotion bars"
COMMENTS: I purchased this to make smaller lotion bars as samples. I have them for sale but i also include a free sample bar with all my orders so this is a perfect size. The mold creates a very cute leaf and the bars pop out very easily. I would recommend!
PRODUCT USED IN: Lotion Bars & Sticks
Janice • New Jersey
Date Submitted: 11/14/2015
I Recommend This Product!
"Works well"
COMMENTS: I like to make M&P embeds with these type molds. Just pop them into the top,of the soap. Releases well.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Releases well • Nice Size
• None
Jessica • Florida
Date Submitted: 12/08/2014
I Recommend This Product!
"Bath fizzles"
COMMENTS: This is a nice size for the bath fizzles. Mold is flexible enough to get out product easily.
PRODUCT USED IN: Bath Fizzies & Salts
Karen • Nebraska
Date Submitted: 05/02/2014
I Recommend This Product!
"Leaf Guest Soap Mold"
COMMENTS: I originally bought this for samples of lotion bars but I plan to use it for small soaps too
PRODUCT USED IN: Lotion Bars & Sticks
CHRISTY • California
Date Submitted: 12/21/2013
I Recommend This Product!
"NICE TRAVEL SIZE"
COMMENTS: THIS WAS A PERFECT SIZE FOR MY TRAVEL SIZE LOTION BARS AND MAKES PERFECT GIFT SIZE
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Molds By Material
Retired Soap Molds
