The Clover Small Round Soap Mold is used for making wax tarts for a potpourri or tart burner. When the scented tart heats up, it fills the room with aroma. You can also make small soap guest bars with this mold.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars. Wax Tarts.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:

Material: Plastic		Style: Bar
Avg. Bar Weight: 0.65 oz		Bar Cavities: 8
Bar Depth: 7/8"		Bar Length: 1.5"
Bar Width: 1.5"		Max Temperature: 135ºF

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients

International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

SDS & Documents

• Non-Hazardous Statement
• Animal Testing Statement

Questions & Answers (0)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question

0 Question(s) Shown Below

Recipes & Videos (0)

CustomerReviews (1)

Submit A Rating

Average Customer Rating:

(1 Reviews)

Lisa Johnson • Ohio

Date Submitted: 08/14/2016

I Recommend This Product!

	"4-H Projects"
COMMENTS: This mold was purchased specifically for wax melts, but also works great for small MP soaps to be included in gift bags, guest soaps, or CP samples. Also a great mold to use for 4-H themed products. No issues popping out the product and I never put products in the freezer to assist removal...just 25+ years of learning when and how to remove the product without damaging the molds!
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Candles - Paraffin