Crafter's Choice™ Oval Regular Column Silicone Soap Mold 2010 - Wholesale Supplies Plus
 
Current Processing Times: 1-2 Business Days
 
 
Wholesale Supplies Plus
 
   
 
 
 
Soap Molds Plastic & Silicone Molds Basic - Smooth Designs - (You Are Here - P10303)

Crafter's Choice™ Oval Regular Column Silicone Soap Mold 2010

Pricing






Additional Information
This oval shaped column mold stands vertical, and allows soapers to embed soap in a new way. Place embeds made from Crafter's Choice Column Shape Molds and Column Mini Molds to create a unique design. *We recommend shaping this mold before use, and supporting this loaf mold or pouring in layers for best results.

Country Of Origin: China

Helpful Product Information:
Style: Column Avg. Bar Weight: 38 oz
Bar Cavities: 1 Bar Depth: 8.125"
Bar Length: 2.375" Bar Width: 3.75"
Max Pour Temperature: 135°F Max Temperature: 500ºF
Mold Capacity (oz): 38

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).


Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Directions:
Melt & Pour Soap: Close the mold by firmly pressing the edges together. For added safety, clamp the edges. Support the mold with two flat objects such as two mitre boxes on their sides. Slowly pour melted soap no hotter than 130ºF into mold. Allow soap to harden then open mold and remove soap. Trim edges with a potato peeler or spatula then slice into bars.

Cold Process Soap: Close the mold by firmly pressing the edges together, and clamp the sides. Support the mold with two flat objects such as two mitre boxes on their sides. Slowly pour traced soap into mold. After at least 24 hours, remove soap from mold with gloved hands. If desired, trim edges with a potato peeler or spatula. Slice into bars and allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Hot Process Soap: Close the mold by firmly pressing the edges together, and clamp the sides. Scoop hot process soap into mold. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Open mold and remove soap loaf. If desired, trim edges with a potato peeler or spatula. Slice into bars.

Care:
Hand wash mold in warm, sudsy water.
SDS & Documents
Questions & Answers (5)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 5 Question(s) Shown Below



Q Bubble
Posted By: Ila   |   April 19, 2019

"Does this mold need to be filled in thirds or layers to prevent bowing? "




Q Bubble
Posted By: VICTORIA   |   September 02, 2018

"Can these be used for CP soap?"




Q Bubble
Posted By: Judith   |   March 25, 2015

"Do these molds stand up on their own without the sides bowing or do they need to be supported?"




Q Bubble
Posted By: Kathy   |   February 21, 2015

"How tall is this mold and how wide is it?"




Q Bubble
Posted By: Barbara   |   February 19, 2015

"How many ounces does this hold?"


Recipes & Videos (1)
CustomerReviews (5)
Submit A Rating Average Customer Rating: (5 Reviews)



William • Illinois

Date Submitted:  10/15/2021

"Worthless chunk of overpriced silicone"
COMMENTS:  Not sure what happened to these molds but they’re worthless for soap making. I was really looking forward to using the oval molds because my round column molds work so well. First, $81.00 total for these 2 molds is way overpriced. Second, they’re not oval! They’re misshapen and will not make a uniform oval shape. I soaked them in hot water to see if they would return to normal but they didn’t change. When I tried to reshape them by filling with hot water I found they will not stand up on their own and the seams won’t seal so hot water ran everywhere. This product does not function as intended and will be returned.
PRODUCT USED IN:   Soap - Cold Process
Jen • California

Date Submitted:  08/28/2019

"Stick with plastic mold for oval bars!"
COMMENTS:  This mold is a novel idea but definitely want to pour in sections. because when I used I had filled it with a bunch of pumice filled 1-inch ball embeds, as soon as i filled it . disaster struck , it SPRUNG a leak and all my soap came running out the side what a mess, good idea though.
PRODUCT USED IN:   Soap - Melt & Pour
angela • Maryland

Date Submitted:  11/12/2016

I Recommend This Product!
"Silicone mold"
COMMENTS:  I really do like this mold. it makes lovely bars! It is easy to open the mold without marking up the cold process bars. This mold did not leak but i do clip the sides to be sure. Definitely recommend this lovely shape that fits in the hand very nicely! I made cold process and melt and pour with this. A+
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Lovely shape,
• durable
• make it taller?
Iris • Florida

Date Submitted:  01/27/2016

I Recommend This Product!
"Just a little trick, works wonderful."
COMMENTS:  Some people has problems with this mold because of the weigh of the soap. The solution is using severals clips (the type for paper) on both sides to secure the borders and the oval shape. Mainly on the tops. Doing that it works perfect.
PRODUCT USED IN:   Soap - Cold Process
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Make very good oval size of soap.
Melissa • Vermont

Date Submitted:  01/26/2016

I Recommend This Product!
"Excited "
COMMENTS:  The mold overall is good. I just wish it sealed tighter.
PRODUCT USED IN:   Soap - Cold Process
Customer Photos (0)
Charts & Calculators
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Coupons
Safe Sale Guarantee
Making Bulk Purchases
1-800-359-0944
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Careers/Job Openings

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved