We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Our Sodium Hydroxide, sometimes called lye, is food grade. It is commonly used to make high quality, handmade soap. Highest quality produced which makes top quality soap. Many People choose to use these flakes because they claim they produce less static!
*** Hazardous Material Notice ***
THIS SHIPMENT IS CLASSIFIED AS ORM-D CONSUMER COMMODITY. OUR PACKAGING MEETS ALL APPLICABLE REQUIREMENTS OF THE US DEPARTMENT OF TRANSPORTATION. WE ARE A CERTIFIED SHIPPER AND SEND THIS PRODUCT IN SAFE AND LEGAL PACKAGING BY A LEGAL CARRIER.
Country Of Origin: China
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): Sodium Hydroxide
Common Name Ingredient Listing (FDA Approved): Sodium Hydroxide
Directions:
Directions for use depend on application. Do not use at full strength. Always add Sodium Hydroxide to water. Use chemically resistant container and tools. DO NOT ADD WATER TO SODIUM HYDROXIDE AS IT CAN CAUSE A VOLCANO EFFECT.
DANGER: KEEP OUT OF REACH OF CHILDREN. KEEP AWAY FROM PETS. AVOID CONTACT WITH SKIN, EYES, MUCOUS MEMBRANCES, AND CLOTHING. WEAR RUBBER GLOVES WHEN USING THIS PRODUCT.
WARNING: Harmful if inhaled or ingested. Eye and skin irritant. Wear gloves. Lye will burn skin on contact. Use in ventilated areas. Dust may harm lungs if inhaled. If eye or skin contact occurs, flush with water for 15 minutes and seek medical attention.
FIRST AID: EXTERNAL: Flood with water then wash with vinegar. INTERNAL: Drink large quantities of water. Follow with citrus juice, if available. Do not induce vomiting. Call physician immediately. EYES: Flush with water for 15 minutes. Get prompt medical attention.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: I have used a few different brands & formats of lye (beads vs. flakes) but stopped buying the others when I found this one! Great product at a reasonable price. I am still a beginner but starting to sell more and receiving requests. Always shipped appropriately and in a reasonable amount of time. I like that I can have other things with the order & not just this product. Thanks for your great customer service!
• can ship other items with order • I prefer the flakes over beads • no static with flakes
• buy in bigger bulk than just 2 lb
Angie • Virginia
Date Submitted: 09/13/2021
I Recommend This Product!
" Sodium Hydroxide Flakes"
COMMENTS: I love the flakes! They do not have static that sticks to the cup that I use to pour it in. It does have "some" dust when poured so don't get too close when pouring.
I would say that it performs well in my soaps and is priced reasonably.
Will continue to purchase.
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Quality • Dissolves quickly • No Static
• Less dust • Nothing else
melanie • Tennessee
Date Submitted: 09/01/2021
I Recommend This Product!
"Preferred to beads"
COMMENTS: Doesn't have the static charge and stick to everything like the beads, which is much nicer.
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Soap - Hot Process
Cameron • North Carolina
Date Submitted: 08/17/2021
I Recommend This Product!
"Lye Dust - but did the job"
COMMENTS: This lye did the job in my soap and worked just fine. After trying the flakes, I'm back to using the beads. I didn't care for the amount of lye 'dust' that occurs with the flakes and they do not dissolve as easily as the beads.
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• It made soap
• flakes cause lye dust
Julie • Maine
Date Submitted: 07/02/2021
I Recommend This Product!
"Easy to Work With"
COMMENTS: I prefer this for of sodium hydroxide. The flakes don’t develop static and it’s much safer and easier to use. The price per pound is very competitive as well.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• No static • Great price
• The containers are a bit tricky to open
Audrey • Indiana
Date Submitted: 04/28/2021
I Recommend This Product!
"Best price"
COMMENTS: Best price and great quality. I keep coming back for more.
PRODUCT USED IN: Soap - Cold Process
Donna • Florida
Date Submitted: 02/28/2021
I Recommend This Product!
"Best lye I've EVER used"
COMMENTS: I've ordered lye from several other vendors and it was a powder that always clumped and sometimes got static electricity that made it airborne all over my kitchen and me. This Lye is in flakes that are awesome... so sooo easy to handle.
Oh, btw, it also worked GREAT on a clogged drain??.
PRODUCT USED IN: Soap - Hot Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• doesn't clump no static electricity • easy to handle • Unclogged my drain too!
• Nothing
Carol • New York
Date Submitted: 02/15/2021
I Recommend This Product!
"More comfortable with this"
COMMENTS: I have used this sodium hydroxide for years. But recently WSP was out of stock for quite a while ... and so was I. I waited and finally bought from someone else .. I will go back to WSPs - I feel more comfortable with it. If for some reason a small piece misses my water pitcher (Yikes!!) - it is large enough to see and hear - just makes me feel safer.
PRODUCT USED IN: Soap - Cold Process
Jacque • Louisiana
Date Submitted: 11/19/2020
I Recommend This Product!
"Love the lack of static; takes a while to dissolve"
COMMENTS: This is great to not have to worry about static with the beads (just use a dryer sheet the first time you open those) but it takes a good 15-30 minutes for all the flakes to dissolve when using 100% ice. Maybe it doesnt take as long with room temp water. Other than that, I really love these flakes. They are also the least expensive supplier I have found out there for smaller quantities.
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• No static • Easy to use
• Takes longer to dissolve than beads
Brandy • New Hampshire
Date Submitted: 10/27/2020
I Recommend This Product!
"Good"
COMMENTS: Its great
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Static • Wish there was a bead option
LizLion • Iowa
Date Submitted: 07/21/2020
I Recommend This Product!
"Good"
COMMENTS: These work well for cold process soap, but I do wish they had an option for the beads. The flakes seem to take longer to dissolve and are dusty.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• works well for CP soap
• Would prefer an option to get beads
Teresa • Texas
Date Submitted: 07/04/2020
I Recommend This Product!
"Fantastic Lye!"
COMMENTS: Your Lye is absolutely fantastic! I never have any problems with the quality or the safety cap. I love using flake lye. The bead lye has too much static and I don't like that. Thanks for carrying another great product.
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• It's in flake form!
JoAnne • Maine
Date Submitted: 06/22/2020
I Recommend This Product!
"Great Product"
COMMENTS: I have never had a problem with this or any other product from WSP
PRODUCT USED IN: Soap - CPOP
Peggy • Washington
Date Submitted: 04/08/2020
I Recommend This Product!
"Works great - no issues"
COMMENTS: I used to use the lye beads but I prefer the flakes better. I have had no issues soaping with this lye.
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP, Soap - Hot Process
Caitlin • California
Date Submitted: 03/31/2020
I Recommend This Product!
"Good product"
COMMENTS: I personally prefer to use a beaded lye as I find it has less dust, but this product is a great price compared to the competition. Will be ordering again.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• consistency to reduce dust
Nicole • California
Date Submitted: 03/11/2020
I Recommend This Product!
"Prefer WSP Sodium Hydroxide Flakes"
COMMENTS: Love using WSP Sodium Hydroxide Flakes for my cold processed soap making. I prefer to use the flakes over the beads for ease of use and very happy that WSP offers the flakes. The price and the cost to ship (handling fee) is the most affordable compared to other suppliers.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• ease of use • container ease of use • price (product and shipping)
Martie • Missouri
Date Submitted: 03/02/2020
I Recommend This Product!
"Love these flakes"
COMMENTS: I used the lye beads from another company for years... they went everywhere. So thankful I found these Sodium Hydroxide Flakes. These are so much easier to use and way less dangerous since the go where you pouring them.
Thanks WSP.
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Easy to use • Goes where I am pouring
• nothing
deborah • New York
Date Submitted: 02/04/2020
I Recommend This Product!
"Good quality"
COMMENTS: I've always used the sodium hydroxide beads. This is my first time trying out the flakes. The only difference is this one takes a lot more stirring to dissolve. Works fine.
PRODUCT USED IN: Soap - Cold Process
Katelyn • Ohio
Date Submitted: 10/29/2019
I Recommend This Product!
"High Quality Sodium Hydroxide"
COMMENTS: This made my soap making so much easier. It dissolves easily in water, both frozen and liquid, and doesn’t clump. I’ve never had lye pockets using this lye. The only thing I would be careful of is making sure to wear a mask over your mouth and nose, especially when getting to the bottom of a container. I wasn’t wearing a mask when I got to the bottom of my first bottle, and the dust got kicked up into the air, right into my face. Other than that, I have no complaints, it gets the job done!
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Easy to Use • Safety Features on Cap
• Powdery at Bottom
Cherish • Mississippi
Date Submitted: 10/27/2019
I Recommend This Product!
"Perfect!"
COMMENTS: This sodium hydroxide is so pure and soaps so well! No horrible clumps either!
PRODUCT USED IN: Soap - CPOP
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• great quality
laura • California
Date Submitted: 10/13/2019
I Recommend This Product!
"My Favorite Lye"
COMMENTS: I've also used lye beads, but found them to be difficult due to static for whatever reason. I much prefer the flakes.
PRODUCT USED IN: Soap - Cold Process
Hannah • Florida
Date Submitted: 10/05/2019
I Recommend This Product!
"Lye Is Lye!"
COMMENTS: Unlike many of the soapers here, I've only tried out two lye brands: Wholesale Supplies and my local supermarkets lye. Buying my lye from WSP was cheaper, and the quality does seem better. I really like how it is flakes and not little beads.
The bottle is very safe. So safe that I accidentally made the cap hard to open. This is completely my fault for not paying attention when I closed it the last time.
The description is true, it does have way less static than other types of lye. However, I noticed the fumes were a lot higher with this lye. This isn't a huge issue, and I believe I'll continue to buy my lye from here.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Flakes • Safe Bottle • Price
• Stench
Home • New York
Date Submitted: 09/23/2019
I Recommend This Product!
"Easy to Work With"
COMMENTS: This was my very first time using lye and I was very nervous about it. The flake form I purchased from WSP was so easy to use, excellent for a beginner. I bought the 2 lb container, which was easy to pour from the wide mouth. I was properly protected and had no issues whatsoever. The price is also fantastic, as I'd been tempted to buy from a local hardware store but would have paid 3x as much! I will definitely continue to buy this item.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Price • Easy to pour • Easy to work with
Lake House Suds • Indiana
Date Submitted: 09/22/2019
I Recommend This Product!
"CP/HP LYE I Preferr"
COMMENTS: This lye is my preference. I have had no problems with it dissolving. Makes great cold process and hot process soap.
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
Crystal • Florida
Date Submitted: 09/09/2019
I Recommend This Product!
"Will buy over and over! "
COMMENTS: I had never used these before and I don’t know if I will go back to the fine grjnd stuff. They where packaged well and easy to use, not clumpy!
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Not clumpy • Good packaging
wilmary • Florida
Date Submitted: 09/08/2019
I Recommend This Product!
"Good"
COMMENTS: Perfect to make CP soap. I haven’t had any problems with it.
PRODUCT USED IN: Soap - Cold Process
deanna • West Virginia
Date Submitted: 09/08/2019
I Recommend This Product!
"The best!"
COMMENTS: This is my go to lye for soap making - both hot and cold process. It never lets me down! Thank you!
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
Michelle • Mississippi
Date Submitted: 09/05/2019
I Recommend This Product!
"cold processed soap"
COMMENTS: this is great for cold processed soap and it will make a lot of soap with one bottle
PRODUCT USED IN: Soap - Cold Process
Cori • Washington
Date Submitted: 09/04/2019
I Recommend This Product!
"Works Great"
COMMENTS: I love using these flakes opposed to the beads because the beads have a tendency to make more static and can end up all over. These flakes are much easier to handle with less chance of them spilling out like the beads do.
PRODUCT USED IN: Soap - Cold Process
Home • Arkansas
Date Submitted: 09/02/2019
I Recommend This Product!
"Works great"
COMMENTS: It works great, I like the flakes.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Does what it is supposed to
Melissa • Missouri
Date Submitted: 08/13/2019
"Lye flake disaster"
COMMENTS: I made several batches of our CP soap with this product and ended up with undissolved lye issues in every batch. I prefer granule lye over flakes and definitely learned the hard way on this one. Perhaps I did something wrong, but I find the flake to be harder to handle/measure. If your a new soap maker, watch carefully to make sure it has completely dissolved, I make goat milk soap and soap with lye/milk mixture at 80-100°.
PRODUCT USED IN: Soap - Cold Process
Liz • California
Date Submitted: 08/09/2019
I Recommend This Product!
"Almost no fumes!"
COMMENTS: I was used to the regular lye that I always wore a mask for so much fumes but not this one. I don't even put on a mask when mixing just turn my head when mixing, almost no fumes I love it!
PRODUCT USED IN: Soap - Hot Process
Megan • Maryland
Date Submitted: 08/06/2019
I Recommend This Product!
"Great Lye"
COMMENTS: Always works well in my soap. Never any issues with it dissolving.
PRODUCT USED IN: Soap - Cold Process
Amy • New Jersey
Date Submitted: 08/01/2019
I Recommend This Product!
"Best price"
COMMENTS: Great quality and best price around
PRODUCT USED IN: Soap - Cold Process
Chiaki • California
Date Submitted: 07/31/2019
I Recommend This Product!
"Works as Expected"
COMMENTS: This is the very first lye I bought to make my own soaps, and I have nothing to complain about it. It works fine as I expected.I will buy this again:)
PRODUCT USED IN: Soap - Cold Process
Crystal • Minnesota
Date Submitted: 07/25/2019
I Recommend This Product!
"The Only Lye I'll Buy"
COMMENTS: I've used this many times now for my hot process soap making and have been very happy with it. The flakes make it easy to mix. They dissolve quickly. My static issues are gone now that I use this lye. Really, I can't ask for more. As the title says, it's the only lye I'll buy.
PRODUCT USED IN: Soap - Hot Process
suzann • Nebraska
Date Submitted: 07/25/2019
I Recommend This Product!
"Sodium Hydroxide"
COMMENTS: This was the first time I used the flakes, I love it, easy to pour and does not clump up after opening! I will defiantly use this again!
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• everything
• nothing
Millinea • Alabama
Date Submitted: 07/21/2019
I Recommend This Product!
"lye flakes vs lye micro beads"
COMMENTS: I wish I had tried this lye years ago ! So much easier and almost no static, like the micro beads tend to have. Put me very at ease when using. Dissolved wonderfully. I love this product !
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• greatly reduced static • ease of use • quick dissolving
• Nothing !
Suzie • Texas
Date Submitted: 07/20/2019
I Recommend This Product!
"CRAZY Awesome! ... Really!! "
COMMENTS: I've been making soap for some years and these flakes (yes, in the flake form) are the BEST I've ever used! I get a cleaner dissolve, never any lye lint, and my soap feel different when unmoolding and using. Might sound silly.. but I've done my testing.. and comparisons.. and these are best I've found! NO STATIC, either! I mean.. WIN WIN WIN!
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Quality • No Lye Lint • Best Dissolve
Shawna • South Carolina
Date Submitted: 07/20/2019
I Recommend This Product!
"Works perfect."
COMMENTS: I've never ordered flakes before, but I thought I would give them a try.
Price is really good per ounce (which is why I decided to try it), a bit "powdery" but works very well. By "powdery" I mean that when pouring into my measuring container, there is some "smokey" fumes that come off them that I never experienced with the bead type. Not an issue if you wear a mask like I do. Performs perfectly and I will definitely order again.
PRODUCT USED IN: Soap - Cold Process
Donna • Oregon
Date Submitted: 07/16/2019
I Recommend This Product!
"Very easy to use - no static!"
COMMENTS: I really like this lye. The product I used before was in a bead form that tended to hang up on the container due to static. The flakes don't do that at all. I was concerned that the flakes might be slow to dissolve, but I did not experience any problem with that at all. There is no difference at all in my hot process soaps or shampoo bars from those made with the lye beads, so I am a happy convert! The container is easy enough to open, considering that it needs to be child-safe and moisture proof.
PRODUCT USED IN: Soap - Hot Process, Soap - Shampoo Bars
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Ease of use • Good price • Secure container
• Can't think of a thing to change.
Aaisha • Alabama
Date Submitted: 07/08/2019
I Recommend This Product!
"Soap Making Made Easy!!!"
COMMENTS: These flakes are super easy to work with, and perfect to measure out! Used very well for my soap bars!
PRODUCT USED IN: Soap - Hot Process
Jan • Michigan
Date Submitted: 07/07/2019
I Recommend This Product!
"Better than the granules! "
COMMENTS: These flakes are the way to go. They dissolve better than the granules--I strain my lye solution when I pour it into the soap batter and I noticed the flakes leave behind fewer clumps. They're also easier to work with because they're not full of static electricity like the granules.
PRODUCT USED IN: Soap - CPOP
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Easy to use • No static electricity
• Nothing at all
H • Connecticut
Date Submitted: 07/02/2019
I Recommend This Product!
"Flakes or beads "
COMMENTS: I love using these flakes much easier to measure than the beads and no static
Base Oils, Butters & Lye
Bath Basket Accessories
Books & Print Material
Embeds & Embellishments
Equipment & Tools
Melt and Pour Soap Bases
Safety Equipment
Sample Sets
_t.jpg)
