We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
This basic square mold allows for soap creations that are anything but basic! Use this mold with embed paper to create completely personalized bars of soap for weddings, bridal showers, or baby showers.
Country Of Origin: China
Helpful Product Information:
Style: Bar
Avg. Bar Weight: 6.5 oz
Bar Cavities: 6
Bar Depth: 1.25"
Bar Length: 3"
Bar Width: 3"
Max Temperature: 500ºF
Mold Capacity (oz): 39
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: Glad I found that mold. It's perfect. Will be ordering them soon.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Worked well
• nothing
Issi • Ohio
Date Submitted: 11/22/2020
I Recommend This Product!
"Makes nice thick bars, you don't have to cut"
COMMENTS: This mold make nice big square bars that fit the square soap boxes perfectly. I don't need to do anything e\xtra to the bars once I pour theme. I am ordering five more.I do wish this came in a twelve bar mold.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• The size
• a twelve bar option would be nice.
Terry • Arizona
Date Submitted: 05/24/2019
I Recommend This Product!
"Love this mold"
COMMENTS: makes the perfect bar of soap I use it for my goat milk soap because it is easy to un-mold no sticking no fuss and the cavities a big enough to add a little swirl
PRODUCT USED IN: Soap - Cold Process
Stacy • Colorado
Date Submitted: 02/21/2018
I Recommend This Product!
"Very Versatile!"
COMMENTS: I am new to soap making, but tried some melt & pour soaps and also plan to use this square shape for some other projects. I love that the mold is silicone and soft sided for easy popping out, but it also has nice sharp edges and corners and a good depth!
COMMENTS: I have been using this mold now for quite awhile and recently ordered more. Many of my customers are requesting this square shaped mold! They love the thickness and shape of the soap. The mold itself is amazing. The soap pops rights out! Easy to clean up as well!
PRODUCT USED IN: Soap - Melt & Pour
Diane • Missouri
Date Submitted: 09/29/2016
I Recommend This Product!
"Easy to use"
COMMENTS: My go to bar mold
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Easy to use
Ana • Texas
Date Submitted: 09/15/2016
I Recommend This Product!
"Very sturdy"
COMMENTS: I think this is a great mold, very sturdy, and works great with melt and pour soaps. I have not used it with hot or cold process yet.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Sturdy • economical
Kyleen • Oregon
Date Submitted: 07/21/2016
I Recommend This Product!
"Perfect Size Mold"
COMMENTS: This product maintains its shape really well. My soap bars have the smoothest edges which I was having a hard time achieving when I cut by hand. My soaps pop easily from the mold. I like that I can make small batches of soap and ensure I'm getting the results I want before making several dozen at a time. I would absolutely purchase this mold again.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Easy to remove soap from mold.
Allison • Texas
Date Submitted: 07/15/2016
I Recommend This Product!
"Excellent "
COMMENTS: Perfect soaps every time. Easy to use clean and unmold
PRODUCT USED IN: Soap - Melt & Pour
John R • Pennsylvania
Date Submitted: 06/23/2016
I Recommend This Product!
"Great mold"
COMMENTS: I make my soap clay and charcoal bars using these molds and love it!
PRODUCT USED IN: Soap - Melt & Pour
Mary • Ohio
Date Submitted: 06/23/2016
"Very nice but mine ripped - just be careful"
COMMENTS: I loved this until mine ripped in a few places. Will stick to loaves.
PRODUCT USED IN: Soap - Melt & Pour
Mary L • California
Date Submitted: 06/09/2016
I Recommend This Product!
"Baby Soaps"
COMMENTS: Just the right size for my Baby Soaps. Very please with the mold.
PRODUCT USED IN: Soap - Cold Process
Agnes • New York
Date Submitted: 05/31/2016
I Recommend This Product!
"Nice Mold"
COMMENTS: Really nice mold. Great for use with water soluble paper for custom soaps. Will be ordering more.
PRODUCT USED IN: Soap - Melt & Pour
Rachelle • Colorado
Date Submitted: 05/01/2016
I Recommend This Product!
"One of my favorite feeling bars"
COMMENTS: I bought the COMBO pack of these silicon molds. They are all easy to use and the shapes are all fun. I actually like the square and the oval more than I expected! My CP soap comes out of these very well. I have made plain bars in these already. Now I am thinking about stamping the bars for extra flare.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Size • Shape • Feel of the bars in your hand
Pamela • Ohio
Date Submitted: 03/23/2016
I Recommend This Product!
"Love it"
COMMENTS: I can unmold my soaps so easily. Will buy more
PRODUCT USED IN: Soap - Melt & Pour
angelique • Washington
Date Submitted: 03/13/2016
I Recommend This Product!
"Amazing "
COMMENTS: I used this soaps mold to make soaps for a wedding and it made it so easy to make them.
PRODUCT USED IN: Soap - Melt & Pour
Gloria • Florida
Date Submitted: 02/15/2016
I Recommend This Product!
"Professional"
COMMENTS: I used this mold for the first time to make several m&p loofah foot scrubbies. The edges of the scrubbies were so smooth and perfect. The scrubbies look so eye catching. I really like this mold because it is sturdy, flexible and released my m&p easily.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Sturdy and flexible • Pops out soap with ease • Smooth and perfect edges.
• Nothing
Jhenna • Indiana
Date Submitted: 12/21/2015
I Recommend This Product!
"Make nice big bars"
COMMENTS: I hadn't realized how big of bars this mold makes. They are easily 6 oz in weight (soaps) and a bit cumbersome to use on the shower as they are so large. My customers told me that they often cut them half before using.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
Meagan • Colorado
Date Submitted: 09/12/2015
I Recommend This Product!
"Awesome"
COMMENTS: This mold is sturdy and firm. I really like it. Great quality.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
Dana • California
Date Submitted: 08/24/2015
I Recommend This Product!
"Great Mold"
COMMENTS: Love this mold. I use it to make picture soaps with the WSP water soluble paper. Easy to unmold, finish is nice and clear. The only tiny downside is that the finish on the mold is SO glossy that every single, tiny detail or flaw in the surface of the mold will show up on the surface of your soap also, i.e. fine and/or wavy lines, etc. Please note that I only notice this because I am using the extra clear soap base layer on top to place my images in, and I'm super detail oriented. I bought three more of these molds today!
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Easy to unmold
YTS • Texas
Date Submitted: 08/16/2015
I Recommend This Product!
"I love these molds!"
COMMENTS: I love these molds!
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
Lynne • New Mexico
Date Submitted: 08/07/2015
I Recommend This Product!
"Square can be anything but"
COMMENTS: I love these silicone molds...they are flexible and easy to use but still sturdy. The basic square shape allows a multitude of possibilities.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• ease of use, flexible
• nothing
Julie • Virginia
Date Submitted: 08/04/2015
I Recommend This Product!
"Love these"
COMMENTS: These are the easiest molds. Soap pops right out. Buying more.
PRODUCT USED IN: Soap - Melt & Pour
Adi Mazal • Texas
Date Submitted: 06/01/2015
I Recommend This Product!
"wonderful mold!"
COMMENTS: Love the size and flexibility.
PRODUCT USED IN: Soap - Melt & Pour
Jennifer • New York
Date Submitted: 05/19/2015
I Recommend This Product!
"love this product "
COMMENTS: Nice big bars, even for smaller hands. Great product.
COMMENTS: Great product for making large bars of soap; just pour product into mold wait for it to cure, pop the product out and clean up is a breeze, Highly recommended!.
COMMENTS: This is a good quality mold, easy to use and clean. I've needed it as a good basic mold for many soaps. My latest use was for the Christmas gift box M&P soaps. Turned out great.
PRODUCT USED IN: Soap - Melt & Pour
Cheryl • Pennsylvania
Date Submitted: 10/12/2014
I Recommend This Product!
"Square Basic Silicone Mold"
COMMENTS: Love this mold. You have a nice big bar of soap after pouring!! You will love it too!
PRODUCT USED IN: Soap - Melt & Pour
Darlene • Texas
Date Submitted: 10/08/2014
I Recommend This Product!
"Great for my Man Soap!"
COMMENTS: This mold makes a nice clean big bar. I use it for my Man Soap because it's a bigger bar than usual. I would heartily recommend it !
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Smooth lines • Square shape
Sherry • Florida
Date Submitted: 10/08/2014
I Recommend This Product!
"Great for my Sea Salt Soap Bars"
COMMENTS: This mold makes it so easy to make my sea salt soap bars. They come out perfectly. It makes a nice size bar and men seemed to be drawn to this shape of bar... I have no idea why. But LOVE LOVE LOVE this mold
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• size of bar • Easy to unmold • easy to clean
• nothing
Cindy • Wisconsin
Date Submitted: 08/06/2014
I Recommend This Product!
"Buy these soap molds!"
COMMENTS: It doesn't matter if you are a seasoned professional soap maker or new, you should buy these molds. I have spent hundreds on molds and these are the best by far. These silicone molds hold there shape and the soap pops out easily. I can't say enough about these molds, they are great!
COMMENTS: I ordered this product after using store bought plastic molds. This product has made my life so much easier and makes amazing soap molds! I couldn't be happier with the product.
PRODUCT USED IN: Soap - Melt & Pour
Julia • Virginia
Date Submitted: 06/21/2014
I Recommend This Product!
"Good quality silicone mold"
COMMENTS: Pretty thick and not too delicate. I use this for salt bars. I find this holds about 1 lbs of oil with 50% salt.
COMMENTS: Very reliable mold. All sides hold up well even if you are making a few bars. Makes a nice smooth bar just right size for bath bars.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• no soap color change like some molds
Mona • Alabama
Date Submitted: 05/29/2014
I Recommend This Product!
"Perfect for large hands"
COMMENTS: Perfect for those who want more soap for the dollar. But more than that these are perfect for people who just dont want a small hard to hold size
PRODUCT USED IN: Soap - Melt & Pour
Angela • Ohio
Date Submitted: 04/29/2014
I Recommend This Product!
"works great"
COMMENTS: Perfect size for a large bar of soap. Super easy to use and clean.
PRODUCT USED IN: Soap - Melt & Pour
Binyomin • New Jersey
Date Submitted: 04/25/2014
I Recommend This Product!
"No Complaints"
COMMENTS: No news is good news. This product is as described, nothing less, nothing more.
PRODUCT USED IN: Soap - Melt & Pour
Melissa • Mississippi
Date Submitted: 04/20/2014
I Recommend This Product!
"Large Squares"
COMMENTS: This is a great silicone mold. The bars are very large and work well with the embed paper. Mold is easy to unmold soaps.
PRODUCT USED IN: Soap - Melt & Pour
Amir • Michigan
Date Submitted: 04/10/2014
I Recommend This Product!
"BIG BARS"
COMMENTS: I bought this to make a men's clay and tea tree oil soap. I didn't realize how big these bars were. The soap did pop right out though and they worked amazing.
PRODUCT USED IN: Soap - Melt & Pour
Bianca • Florida
Date Submitted: 03/31/2014
I Recommend This Product!
"Great mold"
COMMENTS: Easy to remove bars from mold without damaging corners
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• remove soap easily
Andy • Texas
Date Submitted: 03/15/2014
I Recommend This Product!
"Best molds"
COMMENTS: I'm trying to collect all these molds and buy a few at a time,cause you never have too many
PRODUCT USED IN: Soap - Melt & Pour
Judy • Illinois
Date Submitted: 02/13/2014
I Recommend This Product!
"Perfect Basic Soap Mold"
COMMENTS: So sturdy - I just love it!
PRODUCT USED IN: Soap - Melt & Pour
Alisha • Texas
Date Submitted: 02/13/2014
I Recommend This Product!
"Durable Mold, Great Results"
COMMENTS: I purchased this when they were red colored so I haven't had a chance to try the new clear ones. I've been using this mold for about a year and it's great. The soaps come out perfect every time. They are easy to clean too. Sometimes fragrance lingers after I've washed it but it eventually goes away and doesn't transfer. The mold is very sturdy. I've twisted and pulled and did just about everything to it but it hasn't weakened or tore.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Quality built • Very durable • Soaps come out perfect every time
Krisann • North Carolina
Date Submitted: 02/12/2014
I Recommend This Product!
"Nice mold for CP"
COMMENTS: Great mold for CP that produces large square bars with clean, crisp edges. Easy to pop out soaps and super easy to clean. I use this mold frequently for test batches or for using up overflow soap batter from large batches.
PRODUCT USED IN: Soap - Cold Process
Holly • Oklahoma
Date Submitted: 12/19/2013
I Recommend This Product!
"OMG !!!!"
COMMENTS: Where has this mold been my whole life??? You mean I don't have to cut the bars???? You mean I don't have to grease or line a mold??? You mean all I simply have to do is pour the soap, wait a while, and pop it out and I have PERFECT square bars???
I LOVE this mold sooooo much I am buying 2 more. I will NEVER use anything else again!!!!!
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• I love EVERYTHING about this mold !!!
• Would come in 18 or 24 bar capacity
Dorene • Georgia
Date Submitted: 09/30/2013
I Recommend This Product!
"Nice and Sturdy "
COMMENTS: I love this mold and multiple functions that it can be used for.It is durable, the soap just pops out, makes nice size bars and cleans up easily.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• sturdy • multiple uses, not only for soap • nice size bars
• make it clear
Chelsie • North Carolina
Date Submitted: 09/07/2013
I Recommend This Product!
"Good mold"
COMMENTS: I love this mold. Soap pops out really easily and is a great quality. The bars are pretty large and make great gifts.
PRODUCT USED IN: Soap - Melt & Pour
Danielle • Ohio
Date Submitted: 08/16/2013
I Recommend This Product!
"LOVE"
COMMENTS: I will never use hard mold again if I can help it. Easy but must use a gentle hand or it can tare.
PRODUCT USED IN: Soap - Melt & Pour
Stephanie • Idaho
Date Submitted: 08/05/2013
I Recommend This Product!
"Perfect"
COMMENTS: This is exactly what I had in mind when I envisioned my soap. I pined after this product for a while before I finally broke down and ordered it. It arrived quickly and was perfect! I am so happy I found this product!
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Shape • Material • Fast Shipping
Leeana • Florida
Date Submitted: 06/12/2013
I Recommend This Product!
"Strong."
COMMENTS: Durable mold!
PRODUCT USED IN: Soap - Melt & Pour
Hildegard • California
Date Submitted: 04/21/2011
I Recommend This Product!
"Fantastic Soap Mold"
COMMENTS: Probably one of the best soap molds Ive ever used. Soaps are easy to unmold and provides a 'glossy' look.
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Retired Soap Molds
