Milky Way™ Sunflower Soap Mold (MW 139) - Wholesale Supplies Plus
Current Processing Times: 1-2 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Flowers - (You Are Here - P9849)

Milky Way™ Sunflower Soap Mold (MW 139)


Additional Information
There's no better symbol of summer than the sunflower. The Sunflower Soap Mold features the distinctive head and leaves, making it perfect for sunflower soaps or just bringing a bit of the garden indoors.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC Plastic (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 4 oz Bar Cavities: 4
Bar Depth: 1.25" Bar Diameter: 3.25
Bar Length: 3.25" Bar Width: 3.25"
Max Temperature: 145ºF Mold Capacity (oz): 16

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (3)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 3 Question(s) Shown Below

Q Bubble
Posted By: Deborah   |   October 22, 2019

"Can this mold be used for cold process soap?"

Q Bubble
Posted By: Beth    |   June 02, 2014

"Could you tell me what the dimensions of the finished product would be? I am looking for something to fit in your 4 oz. silver tin."

Q Bubble
Posted By: Deborah   |   April 11, 2014

"Can you use hot process method with these molds? "

Recipes & Videos (1)
CustomerReviews (9)
Submit A Rating Average Customer Rating: (9 Reviews)

Dawn • Nevada

Date Submitted:  01/24/2023

I Recommend This Product!
"So good"
COMMENTS:  Turned out so good
PRODUCT USED IN:   Soap - Melt & Pour
• Shape
• Detail
• Design
• Make it deeper
Velma • Florida

Date Submitted:  05/29/2018

I Recommend This Product!
"Love this mold"
COMMENTS:  I used this for cold process soap and it turned out really nice
PRODUCT USED IN:   Soap - Melt & Pour
Diana • Pennsylvania

Date Submitted:  02/02/2017

I Recommend This Product!
"Beautiful! "
COMMENTS:  Melt and pour soap, as well as, bath bombs pop right out and look amazing too.
PRODUCT USED IN:   Soap - Melt & Pour, Bath Fizzies & Salts
• Easy to use
• products come out perfect
Rachelle • Colorado

Date Submitted:  12/03/2016

I Recommend This Product!
"Sunflower Mold"
COMMENTS:  I actually like this one more than I expected to. It is a nice round shape that feels good in your hand. The detail draws you in. I will keep using this one.
PRODUCT USED IN:   Soap - Cold Process
• Shape is nice in the hand.
• Comes out of the mold easily.
• Interesting design.
Mary • California

Date Submitted:  03/31/2016

I Recommend This Product!
" Sunflower Soap Mold (MW 139)"
COMMENTS:  Love these molds, they are easy to unmold. You just need to let them rest overnight or pop them in the refrigerator to help them release.
PRODUCT USED IN:   Soap - Melt & Pour
diane • New Mexico

Date Submitted:  01/27/2016

I Recommend This Product!
"perfect design"
COMMENTS:  Easy to unmold....makes for an attractive soap bar for those who are into Sunflowers!
PRODUCT USED IN:   Soap - Melt & Pour
• Easy to unmold IF you refrigerate it,
• Create a silicone mold with it.
Irma • Virginia

Date Submitted:  10/18/2015

I Recommend This Product!
"Wonderful mold !"
COMMENTS:  This mold turned out to be even prettier than I anticipated. I used a little bit of soap tinted with brown oxide, and applied it to the centers of the mold with a teaspoon. After letting it dry and set up, I lightly sprayed with alcohol, then poured honey soap tinted with some bronze sparkle color bar- just enough to make a deep honey color. After pouring each mold halfway full, I added some dried calendula petals, then finished pouring. When dry, the soaps popped very easily out of the molds and look spectacular ! At the moment I forget which FO I used, but several good ones come to mind and I can hardly wait to make more soap using this mold. Think of daisies , using a yellow center and white soap, or black eyed susans with a dark center and yellow petals- oh boy- time to go play !
PRODUCT USED IN:   Soap - Melt & Pour
Kathryn  • New Hampshire

Date Submitted:  07/25/2014

I Recommend This Product!
"Sunflower Soap Mold"
COMMENTS:  The picture on the site DOES NOT do justice to this mold! It's wonderful! I've done 2 color melt and pour in this mold and it's absolutely beautiful. Looks real! A definite find.
PRODUCT USED IN:   Soap - Melt & Pour
Janita • Arkansas

Date Submitted:  01/05/2014

I Recommend This Product!
"I Love This Mold!"
COMMENTS:  I'm usually not a fan of the plastic molds, as silicone is so much easier to work with. However, I was easily about to pop out my soaps with little effort. The details are also really nice. Looks like the real thing!
PRODUCT USED IN:   Soap - Melt & Pour
• Easy to unmold soap
• Great details
• Nothing
Customer Photos (0)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved