We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Inspired by Art Nouveau tile work, the Guest Tray Tree of Life Soap Mold is a charming interpretation of a common motif from mythology, religion and philosophy that represents the interconnection of families and friends.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC Plastic (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Country Of Origin: United States
Helpful Product Information:
Material: Plastic
Style: Tray
Avg. Bar Weight: 1.5 oz
Bar Cavities: 16
Bar Depth: 0.75"
Bar Length: 1.875"
Bar Width: 1.875"
Max Temperature: 145ºF
Mold Capacity (oz): 24
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: I generally use silicone loafs, but this is my favorite mold! I use it primarily for those bits of leftover batter to use as samples. I fill just to the first indentation to make a flat disk about 1/2 thick. The perfect size for someone to try my soap at very little expense.
I have also used it filled as designed to make some guest soaps as a custom order. They are very pretty and a nice chunky size.
The trick with the Milky Way molds is to be patient before removing! I use Sodium Lactate, and then put it the freezer for a few hours. I run some water over back, turn it upside down on th counter, and the soaps pop out.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Pretty design
MaryAnn • Texas
Date Submitted: 03/22/2017
I Recommend This Product!
"Great Sample Size"
COMMENTS: Made a tray of M&P for samples and giveaways. Detail is very nice. Perfect size for weekend guest use.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Size • Detail
Katherene • California
Date Submitted: 12/02/2016
I Recommend This Product!
"Nice mold... Nice Design"
COMMENTS: Used to make melt and pour soap. Had a little trouble getting soap out of the mold. I just placed it in the freezer for a few minutes and the soap just popped right out.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Nice design
Jennifer • Alabama
Date Submitted: 10/25/2016
I Recommend This Product!
"Great detail"
COMMENTS: The detail is wonderful on this mold. Very nice quality.
PRODUCT USED IN: Soap - Melt & Pour
Agnes • New York
Date Submitted: 06/18/2016
I Recommend This Product!
"Love this Mold!"
COMMENTS: Makes beautiful little guest soaps!
PRODUCT USED IN: Soap - Melt & Pour
Mariluz • Florida
Date Submitted: 12/14/2015
I Recommend This Product!
"loooveee it "
COMMENTS: Very classy
PRODUCT USED IN: Soap - Melt & Pour
Angie • New York
Date Submitted: 09/30/2015
I Recommend This Product!
"Nice little bars"
COMMENTS: Perfect for small shower favors or to give as sample bars of soap. Easy to cut.
PRODUCT USED IN: Soap - Melt & Pour
Courtney • Ohio
Date Submitted: 09/27/2015
I Recommend This Product!
"Worked wonderfully"
COMMENTS: I used it with cold and hot process soaps and it held up perfectly. I waited to be sure my HP soap was under 120 degrees before adding it to the mold. Popped it into the freezer and it was easy to remove the soap.
PRODUCT USED IN: Soap - Cold Process, Soap - Hot Process
Julie • Colorado
Date Submitted: 02/18/2015
I Recommend This Product!
"Love these!"
COMMENTS: We are using these to create guest soaps for a local campground. Everyone loves the Tree of Life pattern, and it is great that it shows up so well in small soaps. I love that I can make the soaps different sizes depending on how deep I pour. My soaps harden quickly in this and were very easy to cut afterwards. I am going to look for more of the soap making trays (I already have 5 others and love them all!)_
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Everything
Kathleen • Alabama
Date Submitted: 01/13/2015
I Recommend This Product!
"Tree of Life Mold"
COMMENTS: I bought this mold to us for my lotion bars, but have also used it for my m&p soap. It fits my overall Celtic type theme for my soap & lotion bar lines. Perfect size for guest soaps & lotion bars.
COMMENTS: I bought this mold for my daughter's bridal to use as guest favors. This is a great mold that released easily and produced a rather large guest bar, in my opinion. The detail was just lovely - I couldn't have asked for a better product for my needs. A smaller version, maybe half the number of bars in a tray, would be terrific for smaller projects. Overall A+ Thanks WSP!
PRODUCT USED IN: Soap - Melt & Pour
Pamela • Florida
Date Submitted: 05/20/2014
I Recommend This Product!
"So Cute!"
COMMENTS: The mold is great and the little squares are so cute! They came out perfect and the definition in the mold is top notch! I am very very pleased with the mold. I used some Tea Tree in my mp soap to accent the mold.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• the quality of the mold • the tree is very professional in design
Jacquelyn • Ohio
Date Submitted: 05/05/2014
I Recommend This Product!
"Great mold!"
COMMENTS: This mold works great! I was worried that the picture wouldn't be detailed but it is! These make perfect sample size bars or guest bars.
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Molds By Material
Retired Soap Molds
