Milky Way™ Deep Rectangle Bath Bar Soap Mold (MW 519) - Wholesale Supplies Plus
Current Processing Times: 3-4 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Basic - Smooth Designs - (You Are Here - P849)

Milky Way™ Deep Rectangle Bath Bar Soap Mold (MW 519)


Additional Information
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Milky Way® Molds are constructed of plastic and have angled sides for easier soap removal. The dimensions listed are for the largest sides. The bottom of each cavity will be slightly smaller than the dimensions listed.

Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 4.5 oz Bar Cavities: 3
Bar Depth: 1.25" Bar Length: 3.5"
Bar Width: 2.25" Max Temperature: 135ºF

Directions & Ingredients

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (4)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 4 Question(s) Shown Below

Q Bubble
Posted By: Jamie   |   February 25, 2020

"What type of label would fit best on this bar of soap? Some of your products show labels that would fit. Thanks."

Q Bubble
Posted By: China   |   May 10, 2019

"Would the finished soap have a curved/domed top, or a flat one?"

Q Bubble
Posted By: Jamie   |   November 22, 2017

"What size shrink bag would be best for this size soap bar "

Q Bubble
Posted By: Susan   |   June 15, 2017

"When it says "1 mold", is this literally one single mold for one single bar of soap? How many bars per mold? If I want to make 12 bars of soap, do I need to buy 12 molds? Thank you."

Recipes & Videos (2)
CustomerReviews (14)
Submit A Rating Average Customer Rating: (14 Reviews)

MaReesa • Washington

Date Submitted:  10/22/2019

I Recommend This Product!
"Good size & shape"
COMMENTS:  I like the size and shape of this mold. It makes a nice looking bar that fits in your hand. More interesting than a basic rectangle. It was a little hard to unmold the soap afterwards, but I managed. The trick is not to fill up the cavity all the way to the top - that way you can use your finger to push the side away from the soap. Once you break the air seal on the sides, you can flip it over and push from the bottom to get the soap to release.
PRODUCT USED IN:   Soap - Melt & Pour
• size
• shape
• a little hard to unmold
Brenda • Missouri

Date Submitted:  09/04/2018

"Not bad"
COMMENTS:  I'm happy as far as getting the size/shape bar I was hoping for. I do feel like the mold is kind of pricy for what you get, and I have a VERY hard time getting the soaps out of the mold.
PRODUCT USED IN:   Soap - Melt & Pour
• Size of the mold
• Price
• Flexibility of the mold
Jamie • Arizona

Date Submitted:  11/24/2017

I Recommend This Product!
"Rectangle Bath Bar Soap Mold (MW 519)"
COMMENTS:  My new favorite soap mold. I am glad I purchased 6 of these and now will be getting more soon. Use for both CP and MP. I leave MP in mold for 24 hours before popping them out, gentle pressure and the seal starts to unlock and out they come. CP I leave in for 72 hours and use sodium lactate in the soap batter and no issues getting them out there either but it may vary on your soap recipe. Nice, comfortable fit in hand. No more soap cutters for me yay!
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
• Size
• Shape
• Simplicity
• A 4 cavity would be nice
Tina • Oregon

Date Submitted:  09/30/2017

"Bar soap mold (MW 519)"
COMMENTS:  Makes a nice full sized bar for my uses. Soap shape feels good in hand. A hard rigid clear plastic mold, somewhat difficult to unmold, perhaps due to the depth of the bars (which I like). The clear plastic makes it easy to see through what is going on inside as you are trying new techniques.
PRODUCT USED IN:   Soap - Melt & Pour
• Produces shiny smooth bars
• I can see through the mold
• Comfortable size bar
tamera • Georgia

Date Submitted:  12/23/2009

I Recommend This Product!
"Great mold!"
COMMENTS:  Stands easily on its own, sturdy, flexible for easy unmolding, great size and shape! I'm very pleased with this mold.
PRODUCT USED IN:  Soap Products
Vanessa • Maryland

Date Submitted:  04/02/2009

I Recommend This Product!
"Very Nice"
COMMENTS:  Makes a very nice looking bar of soap. The perfect size. Easy to unmold after freezing.
PRODUCT USED IN:  Soap Products
Miya • Idaho

Date Submitted:  03/04/2009

I Recommend This Product!
"A perfect 4oz"
COMMENTS:  I absolutely love this mold. It holds a perfect 4oz and is incredibly easy to unmold. If you're looking for a simple, curved rectangular mold, you've found it.
PRODUCT USED IN:  Soap Products
Mary • Ohio

Date Submitted:  06/18/2008

I Recommend This Product!
COMMENTS:  Makes a nice, hefty bar. Simple and perfect for the old-fashioned country look.
PRODUCT USED IN:  Bath Products
Brenda  • Missouri

Date Submitted:  10/16/2007

I Recommend This Product!
"Great soap mold"
COMMENTS:  This worked great for all my different soaps! No problems releasing at all!
PRODUCT USED IN:  Soap Products
Barbara • Tennessee

Date Submitted:  02/16/2006

I Recommend This Product!
"Perfect mold"
COMMENTS:  I love this mold. It is perfect for making oatmeal layered with honey mp soap. Very easy to unmold as well.
PRODUCT USED IN:  Bath Products
Diane • Pennsylvania

Date Submitted:  04/16/2005

I Recommend This Product!
COMMENTS:  This is the perfect mold for the perfect bar of soap.
PRODUCT USED IN:  Soap Products
Quenzette • Texas

Date Submitted:  09/27/2004

I Recommend This Product!
"Quality mold"
COMMENTS:  No problems with this soap mold at all...filled with made soap base, left over night soaps came out very easily next day no freezing or oiling before use.
PRODUCT USED IN:  Bath Products
Jeff • Georgia

Date Submitted:  06/29/2004

I Recommend This Product!
"Excellent Quality"
COMMENTS:  I have used others' trays, and these are excellent for multiple usage. The thickness and heat-rated plastics are evident after the first initial uses. I use a high-content shea butter soap, and it releases perfectly everytime. Also try lining with vegetable or olive oil for those troublesome soaps. Thanks WSP!
PRODUCT USED IN:  Soap Products
Amanda • Ohio

Date Submitted:  03/30/2004

I Recommend This Product!
"Nice mold!"
COMMENTS:  I'm not sure if the ounce measurements are for liquid or weight - but these molds hold 4 oz. of melted soap perfectly. They unmold nicely (with a little patience and freezing for 20 min. or so) and are a really substantial feeling bar of soap.
PRODUCT USED IN:  Soap Products
Customer Photos (1)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved