We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
Enjoy the benefits of a flat and rounded soap with this silicone mold. The flat edge is ideal for helping soap stay on your soap dish, and the rounded side fits nicely in your hand while using.
Common Uses:
Melt & Pour Soap (MP). Cold Process Soap (CP). Cold Process Oven Process Soap (CPOP). Hot Process Soap (HP). Lotion Bars.
Points of Interest:
Maximum Temperature: 500ºF
Manufacturer: Crafter’s Choice®
Material: Silicone
Country of Origin: China
Country Of Origin: China
Helpful Product Information:
Style: Bar
Avg. Bar Weight: 4 oz
Bar Cavities: 4
Bar Depth: 1.25"
Bar Length: 2.75"
Bar Width: 2.25"
Max Temperature: 500ºF
Mold Capacity (oz): 16
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap into silicone mold cavities. Allow soap to cool at room temperature until hard. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Cold Process Soap: Pour soap at trace into the mold cavities. After at least 24 hours, gently pull silicone mold to loosen its grip on the soap. Flip mold over onto a clean surface and gently push on the bottom of mold until the soap starts to release. Grab hold of the soap with a gloved hand, and allow soap to cure for 4-8 weeks. Note that some cold process soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Cold Process/Oven Process Soap: Pour soap at trace into the mold cavities. Preheat oven to 170ºF then place mold in oven. Turn oven off, and keep soap in oven overnight. The next day remove mold from oven. Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold. Allow soap to cure for 2 to 4 weeks.
Hot Process Soap: Scoop hot process soap into mold cavities. Gently tap the mold onto the counter to remove air pockets. Allow soap to cool and harden. (This can take up to 48 hours.) Carefully remove soap from mold by gently pulling the sides away from the soap, and then push on the bottom of the mold until the soap starts to release. Grab hold of the soap and carefully pull out of the mold.
Lotion Bars: Pour melted lotion bar mixture into mold cavities. Allow mixture to solidify. Carefully remove lotion bars from mold by gently pulling the sides away from the lotion bars, and then push on the bottom of the mold until the lotion bars starts to release. Grab hold of lotion bar and carefully pull out of mold.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: Bought on a whim to make some soap bars for hunting with the dirt fragrance. worked very well.
PRODUCT USED IN: Soap - Melt & Pour
Melanie • United Kingdom
Date Submitted: 07/20/2018
I Recommend This Product!
"Lovely Moulds"
COMMENTS: As others have found, these moulds seem much larger than their 4 oz capacity would suggest. They are a perfect size and shape to give as presents in my opinion, and are even easy to wrap. This firm are marvelous: the lady that I dealt with was charming and the postage to England was rapid and fuss free.I'm delighted.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Decent size, different, easy to use.
• Nothing.
Nicole • South Carolina
Date Submitted: 06/13/2017
I Recommend This Product!
"Great product"
COMMENTS: I love the ease of the silicone!!
PRODUCT USED IN: Soap - Melt & Pour
Sharon • Texas
Date Submitted: 03/28/2017
I Recommend This Product!
"soap mold"
COMMENTS: love the versatility of the mold. plan on ordering more in the future
PRODUCT USED IN: Soap - Melt & Pour, Soap - Hot Process, Lotion Bars & Sticks
Theresa • Tennessee
Date Submitted: 01/26/2017
I Recommend This Product!
"Great mold!"
COMMENTS: Easy to fill and unmold,bars fit in my had easy to
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - Hot Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Everything
• Nothing
Camille • Michigan
Date Submitted: 01/24/2017
I Recommend This Product!
"Five Stars"
COMMENTS: I use this mold for MP soaps. I is sturdy and unfolds easily.
PRODUCT USED IN: Soap - Melt & Pour
Debra • Ohio
Date Submitted: 01/24/2017
I Recommend This Product!
"Euro round silicon mold 1614"
COMMENTS: This mold is awesome, very sturdy...every think I've made so far goes out perfect...I'm going to buy a few more...
COMMENTS: I like to use different shapes for different products, so this is a perfect fit for my face soaps. It gives a thick size bar in a shape that fits nicely in the hands. The shape is a neutral fit for men and women in my opinion. Easy to use and unmold.
COMMENTS: I love this silicone mold because it unmolds easily and creates a bar of soap with a lovely, shiny surface. This size fits perfectly in my hand and yet is large enough to last quite a long time. Thank you WSP!
PRODUCT USED IN: Soap - Melt & Pour
Diane • Missouri
Date Submitted: 09/29/2016
"Ok"
COMMENTS: Not a big seller
PRODUCT USED IN: Soap - Melt & Pour
Melissa • Nevada
Date Submitted: 08/30/2016
I Recommend This Product!
"Awesome mold!"
COMMENTS: My m&p soap comes out beautiful every time! The shape is a modern classic that fits well in your hand.
PRODUCT USED IN: Soap - Melt & Pour
Jan • Arkansas
Date Submitted: 06/03/2016
I Recommend This Product!
"Makes a beautiful bar of soap!"
COMMENTS: These silicone molds work great for my cold process salt bars! They are super easy to unmold and give my soaps a beautiful smooth and shiny finish and the bars are the perfect size! They are very sturdy molds and I look forward to making many more batches with them!
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• made of silicone; size & shape
• don't change a thing!
Stacie • Wisconsin
Date Submitted: 04/30/2016
I Recommend This Product!
"Any mold from Crafter's Choice is excellent"
COMMENTS: Crafter's Choice is excellent! Their molds are heavy duty and intended to last through years of use. This particular euro round mold has 4 cavities, and each cavity holds 4 ounces. The bar sizes are convenient for holding in your hands. I like that one side is flat, while the other is round.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• durability • cavity size • shape
• nothing! It's great!
Karen • Washington
Date Submitted: 02/15/2016
I Recommend This Product!
"LOVE IT!"
COMMENTS: As with all of WSP silicone molds. I LOVE IT! I think I own almost each and every one they sell. Yes! I definitely need an intervention! What can I say?
PRODUCT USED IN: Soap - Melt & Pour
Charlotte • Pennsylvania
Date Submitted: 01/25/2016
I Recommend This Product!
"perfect shape/size"
COMMENTS: I love these silicone molds. They unmold easily and create a bar of soap with a beautiful shiny surface. I am especially fond of this size. It fits perfectly in my hand and yet is a large enough to last quite a long time.
PRODUCT USED IN: Soap - Cold Process
Mary • Nevada
Date Submitted: 08/22/2015
I Recommend This Product!
"Euro Round Mold"
COMMENTS: Awesome mold. Great for making Watermelon sliced soap!
PRODUCT USED IN: Soap - Melt & Pour
Brandy • Alabama
Date Submitted: 06/10/2015
I Recommend This Product!
"I love this mold!"
COMMENTS: I love the looks of this mold! It produces uniquely shaped soap compared to your standard square bar.
PRODUCT USED IN: Soap - Cold Process
Linda • North Carolina
Date Submitted: 11/24/2014
I Recommend This Product!
"Very nice mold"
COMMENTS: I like silicone molds and this is no exception. The 4 oz bar size was perfect for my product line. This mold is easy to handle and will be great to use for many batches to come.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Easy to handle • Like 4 oz bar size
CANDICE • New York
Date Submitted: 10/07/2014
I Recommend This Product!
"Wonderful Mold Will Order Again!"
COMMENTS: I ordered this mold for my salt bars, and made them using CPOP, the mold performed excellently. Because the mold is semi-transparent was able to track any overheating issues in the oven and the soaps popped right out after they were cooled.
PRODUCT USED IN: Soap - Cold Process, Soap - CPOP
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Ease of Use
• Larger Size
Dorene • Georgia
Date Submitted: 09/14/2014
I Recommend This Product!
"Excellent!"
COMMENTS: This soap mold is wonderful! It is nice and sturdy, fits into your hand comfortably, unmolds easily and leaves soap shiny! I'm glad I purchased this!
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Sturdy • Fits into hand comfortably • Makes a nice bar!
Darcey • Pennsylvania
Date Submitted: 08/14/2014
I Recommend This Product!
"Need More"
COMMENTS: I love this mold. Makes perfect 4oz bars that are easy to unmold. I need to pick up a few more. Would highly recommend.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process, Soap - CPOP, Soap - Hot Process
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Retired Soap Molds
