Press & Seal Liner - 20mm

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question

9 Question(s) Shown Below

---

Posted By: Krystal   |   January 11, 2020

"I seem to always have issues with these not actually sealing/sticking to the jars/bottles. Do the aluminum ones work better? "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer The aluminum seals work about the same as the regular seals. Be sure your bottles/jars are clean and free of any product. We recommend cleaning with rubbing alcohol. Let dry. Place the seal over the opening and place lid on. Leave for 24 hours before checking to see if sealed. We are sure you are following these steps, but we just wanted to clarify them for others using these seals.

Posted By: WSP Staff   |   Date: January 13, 2020

Was this answer helpful? Yes | No

---

Posted By: Sara   |   May 27, 2019

"Can I use a 20 mm press and seal liner on a “hand sanitizer” container with an opening of 18 mm, 19 mm exterior threads? The inside of the cap does measure 20 mm. Thanks. -Bert & Bennett’s "

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer We would not be able to tell you for certain that these would fit. You would need to purchase some and test them with your containers.

Posted By: WSP Staff   |   Date: May 28, 2019

Was this answer helpful? Yes | No

---

Posted By: Robin   |   November 16, 2017

"what is the difference between this and the non Aluminum Liner other than the price? Thank you."

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer If you find your product dissolves the regular paper press & seal liner, we offer the aluminum ones which we find works better. You do, of course, need to test your product for compatibility with either liner.

Posted By: WSP Staff   |   Date: November 17, 2017

Was this answer helpful? Yes | No

---

Posted By: Millie   |   September 16, 2015

"Will these lids work for 4 oz jars?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer That depends on the width of your jars opening. The 20mm in the name of this liner is the Diameter of the liner itself. If your jar opening is 20mm then this liner will work.

Posted By: WSP Staff   |   Date: September 17, 2015

Was this answer helpful? Yes | No

---

Posted By: TangelOH   |   June 05, 2015

"What's the pattern/writing on these? The image is too pixelated on my computer to tell."

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer "Sealed for your Protection"

Posted By: WSP Staff   |   Date: June 05, 2015

Was this answer helpful? Yes | No

---

Posted By: 6 of 7   |   December 25, 2014

"Can this liner be used along with an orifice reducer?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer The orifice reducer typically site even if not above the neck of the bottle. Therefore I do not feel that the Press and Seal liner will be able to form a tight seal if used with the orifice reducers.

Posted By: WSP Staff   |   Date: December 29, 2014

(2) Found this helpful. Was this answer helpful? Yes | No

---

Posted By: Donna   |   April 13, 2014

"What materials are these made of & are they biodegradable?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Our Press & Seal liners are made of Foam Polyethylene. They are NOT biodegradable.

Posted By: WSP Staff   |   Date: April 15, 2014

(1) Found this helpful. Was this answer helpful? Yes | No

---

Posted By: Tracy   |   October 26, 2013

"What size of neck finish does this liner fit?"

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Staff Answer Our 20 mm fits containers using a 20 mm top. Use this 20 mm liner if your container requires a 20/400, 20/410 or 20/415 top. The first number represents the diameter of the container opening and the second number represents the height of the container neck.

Posted By: WSP Staff   |   Date: October 29, 2013

(1) Found this helpful. Was this answer helpful? Yes | No

---

Posted By: Rana   |   September 27, 2013

"Will these work with lids that already have a liner? I have lids with liners inside them but the liners don't stick to the rim of the bottle like a security seal. I would like to add the feeling of receiving a sealed item to my customers."

Click Here To View 1 answer(s)

Email Me When This Question Gets Answered

Yes this liner will work with lids that already have a liner in them. To use you would place the press and seal liner on your jar or bottle and apply pressure to seal. Then add your lid on top as your normally would.

Posted By: Erin   |   Date: October 01, 2013

(3) Found this helpful. Was this answer helpful? Yes | No

Submit A Rating

Average Customer Rating:

(79 Reviews)

---