Milky Way™ Rose Guest Soap Mold (MW 51) - Wholesale Supplies Plus
Current Processing Times: 1-2 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Flowers - (You Are Here - P9778)

Milky Way™ Rose Guest Soap Mold (MW 51)


Additional Information
This beautiful blooming rose shows wonderful detail on the petals and leaves. The Guest Rose Soap Mold is perfect for rose water soaps or for Portland guests in town for the Rose Festival!

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC Plastic (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 1.75 oz Bar Cavities: 5
Bar Depth: 1.25" Bar Diameter: 2.5
Bar Length: 2.5" Bar Width: 2.5"
Max Temperature: 145ºF Mold Capacity (oz): 8.75

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below

Q Bubble
Posted By: joann   |   January 28, 2015

"what is the diameter of these roses?"

Recipes & Videos (2)
CustomerReviews (13)
Submit A Rating Average Customer Rating: (13 Reviews)

The Fabulous Fennyl • Ohio

Date Submitted:  03/12/2018

I Recommend This Product!
"Nice mold"
COMMENTS:  I love the detail and quality of this rose mold. I tested it with cold process soap. They turned out really pretty. My only issue was getting them to pop out. I ended up putting in the freezer. But now that I know how to work with it, I will continue to use it!
PRODUCT USED IN:   Soap - Cold Process
• Great detail
• works with cold process soap very well
• We need a silicone version
Elisabeth • Missouri

Date Submitted:  06/09/2017

I Recommend This Product!
"Very Nice"
COMMENTS:  This mold is really nice and easy to use. Very sturdy
PRODUCT USED IN:   Soap - Cold Process
Amanda  • California

Date Submitted:  02/21/2017

I Recommend This Product!
"Good product"
COMMENTS:  The only thing about this product is that if you are going to use it for bath bombs the side leaves fall off easily.
PRODUCT USED IN:   Bath Fizzies & Salts
Sarah • Virginia

Date Submitted:  04/16/2016

I Recommend This Product!
"Beautiful details"
COMMENTS:  Wow! This looks better than the picture! I regret not buying more mold! I'm hoping for a silicone version.
PRODUCT USED IN:   Soap - Melt & Pour
• Great details
• Good size
Irma • Virginia

Date Submitted:  03/10/2016

I Recommend This Product!
"lovely handsoaps"
COMMENTS:  This mold is very easy to make colored rose flowers with green leaves, just by pouring the deeper flower portion with pink (or red, or yellow) with colored liquid soap, then after that hardens for a while, spray with rubbing alcohol, then pour in green for the leaves. I especially like these soap with a clear (tinted) flower portion and tinted white soap for the leaves. I made a dozen gorgeous roses for my granddaughter's 21st birthday.
PRODUCT USED IN:   Soap - Melt & Pour
veronica • Texas

Date Submitted:  02/08/2015

I Recommend This Product!
"easy release"
COMMENTS:  I used for bath fizzies and lotion bars. Worked great, Released very easy.
PRODUCT USED IN:   Bath Fizzies & Salts, Lotion Bars & Sticks
Jessica • Florida

Date Submitted:  01/11/2015

I Recommend This Product!
"Lotion Bar"
COMMENTS:  This mold is just perfect for our english rose scented lotion bar. We have colored the bar a light pink and it is a very pretty mold. We will probably order another one. Thanks!
PRODUCT USED IN:   Lotion Bars & Sticks
Emily  • Ohio

Date Submitted:  08/02/2014

I Recommend This Product!
"What a nice surprise!"
COMMENTS:  I poured these for my last show with the green leaves outlined and they flew off my tables! Just for fun, I used this mold to make some bath fizzies to go along with my bath bombs and sold out. The fizzies are pretty fragile but, I took extra care in transport and with tissue paper and they traveled fine.
PRODUCT USED IN:   Soap - Melt & Pour, Bath Fizzies & Salts
• easy to use
• something different for my customers
• would like to have in silicone
Mary • Nevada

Date Submitted:  07/22/2014

I Recommend This Product!
"Nice mold"
COMMENTS:  This is a nice mold. Perfect size for give away samples.
PRODUCT USED IN:   Soap - Melt & Pour
Heather • Indiana

Date Submitted:  06/26/2014

I Recommend This Product!
"A rose by any other name"
COMMENTS:  Roses are delicate and beautiful and symbolize nature... These make great guest soaps or lotion bars. I make mine slightly shallower at times to fit different tin sizes (just pour a little less in). Good detail and quality
PRODUCT USED IN:   Soap - CPOP, Lotion Bars & Sticks
Sherri • Ohio

Date Submitted:  04/29/2014

I Recommend This Product!
"Rose Guest Soap Mold"
COMMENTS:  I purchased this mold in error, it wasn't what I thought I was ordering, but I am happy I made the error! I have been using this mold for M & P. The soaps pop right out. I've been able to use green M & P for the leaves and a separate color for the rose. I've also been brushing mica in different areas to create an entirely different look. Scented with your "Fresh Cut Roses" and you've got the perfect Mother's Day gift...Customers are jumping all over this one.
PRODUCT USED IN:   Soap - Melt & Pour
Guylaine • South Dakota

Date Submitted:  04/17/2014

I Recommend This Product!
"Nice size"
COMMENTS:  Give nice roses with cute leaves on the edge - easy to play with color or to paint out of the mold. Really like the size. Made a Mother's day bouquet by setting up the roses on a mini-muffin shaped soap. Few stick later, our gift was ready to spread beauty and joy. Really easy to push the soap out of the mold. Will try with lotion bar.
PRODUCT USED IN:   Soap - Melt & Pour
• Easy to unmold the soap
• Perfect size
Candleguy52 • Michigan

Date Submitted:  04/01/2014

I Recommend This Product!
"Makes great Guest Bath Soap!"
COMMENTS:  I immediately used this mold. I use melt and pour added some rose oil and poured. Waited until firm. Rose Soap just popped right out! So much easier than the hard plastic molds. Will stock up on all Silicone molds. Easy wipe clean up. Put mold on cookie sheet so I could safely move them. If you add dried herbs such as rose petals grind them and add them at the last minute before pouring. I found this way the herb is stays suspended threw out soap,but this depends on who's pouring. Love the product!
PRODUCT USED IN:   Soap - Melt & Pour
• Easy of Using
• Pops out easy
• Fast clean-up
Customer Photos (0)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved