Milky Way™ Wave 1 Soap Mold (MW 225) - Wholesale Supplies Plus
Current Processing Times: 5-6 Business Days.
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Basic - Pattern Designs - (You Are Here - P1459)

Milky Way™ Wave 1 Soap Mold (MW 225)


Additional Information
Our uniquely shaped Wave soap mold is a fun spin on the traditional bar shape.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 3.5 oz Bar Cavities: 4
Bar Depth: 1" Bar Length: 3.75"
Bar Width: 2.25" Max Temperature: 135ºF

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (0)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 0 Question(s) Shown Below

Recipes & Videos (1)
CustomerReviews (4)
Submit A Rating Average Customer Rating: (4 Reviews)

Eleanor • Utah

Date Submitted:  05/28/2020

I Recommend This Product!
"My favorite for CP salt spa bars"
COMMENTS:  I use this mold for my CP salt bars and they always turn out beautifully! I coat the mold with a tiny skiff of mineral oil to make it easier to unmold. I love the simple elegance of these bars!
PRODUCT USED IN:   Soap - Cold Process
• shape
• easy to unmold
Delores • District of Columbia

Date Submitted:  01/23/2019

I Recommend This Product!
"Fun to Elegant design"
COMMENTS:  This mold is one of those plastic see-though Milky Way jobs that allows you to create a wavy shaped-looking soap. With a change of colorant, you can create bars of soap that range from fun to elegant looking. I pop them into the freezer for about 20 minutes or so to make un-molding easier. The size of the bars are 3.5 oz and yes I wish they were bigger but that's OK they are still fun looking and offers a lot of possibilities.
PRODUCT USED IN:   Soap - Melt & Pour
• Fun Looking
• Easy to unmold
• Make a mold with larger bars
Joanna • Pennsylvania

Date Submitted:  05/14/2017

I Recommend This Product!
"Great mold!"
COMMENTS:  I love the simple shape of the bars, they're a good size too. These molds are heavy and durable, great quality!
PRODUCT USED IN:   Soap - Cold Process
Karen • Washington

Date Submitted:  04/15/2016

I Recommend This Product!
"Perfect Size"
COMMENTS:  This is exactly what I was looking for. A great shape that fits well into your hand.
PRODUCT USED IN:   Soap - Melt & Pour
Customer Photos (0)
Charts & Calculators
Stay updated on sales, new products, free recipes, and more.

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2022 Wholesale Supplies Plus, LLC - All Rights Reserved