We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
This busy little bee is right at home among his favorite flowers. The Bee & Blossoms Soap Mold features gorgeous detail and is perfect for the gardener or honey aficionado.
Common Uses:
Melt & Pour Soap. Cold Process Soap.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Country Of Origin: United States
Helpful Product Information:
Material: Plastic
Style: Bar
Avg. Bar Weight: 3.5 oz
Bar Cavities: 3
Bar Depth: 1.25"
Bar Diameter: 2.75
Bar Length: 2.75"
Bar Width: 2.75
Max Temperature: 145ºF
Mold Capacity (oz): 10.5
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: This is a lovely mold. It shows the bee and the flowers so significantly and it's the perfect size.
PRODUCT USED IN: Soap - Cold Process
Jamie • Arizona
Date Submitted: 01/03/2018
I Recommend This Product!
"Bee & Blossoms Soap Mold"
COMMENTS: Used this mold with WSP Three Butter Soap Base. Beautiful detail for my honey butter and herb soap bars. Easy release. Will continue to use and get a few more.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Detail of bar
Tina • Oregon
Date Submitted: 09/30/2017
I Recommend This Product!
"Bee and Blossom Mold (MW 58}"
COMMENTS: This mold makes a very cute soap. I was surprised at the amount of detail as it is a rigid clear plastic, but its great! The honey bee on top of the mold has enough depth to easily pour and hold a separate color, the bee and flowers have enough texture and depth to many different details and techniques.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Wonderful detail • Hardly any trimming needed • Great focal point for gift baskets
Rachelle • Colorado
Date Submitted: 04/01/2016
I Recommend This Product!
"Great for Honey Soap"
COMMENTS: This is a darling little mold. I had absolutely NO trouble releasing my CP soap after 18 hours. I do use sodium lactate at the medium range, but the soap came out very nice.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Design
• Make it a Tad bigger
Agnes • New York
Date Submitted: 03/12/2015
I Recommend This Product!
"Adorable Mold"
COMMENTS: This makes a very pretty and novel soap. Like using it with the honey M&P bases. Relatively easy to unmold - just don't let the soap sit in it too long after hardening.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Wish it were silicone.
Stephanie • Washington
Date Submitted: 06/22/2014
I Recommend This Product!
"Beautiful"
COMMENTS: I use this mold with the honey base melt and pour soap and it turns out beautiful every time!
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Retired Soap Molds
