Milky Way™ Big Tray - Handmade Soap Mold (MW 144) - Wholesale Supplies Plus
Current Processing Times: 1-2 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Handmade & Savon - (You Are Here - P9800)

Milky Way™ Big Tray - Handmade Soap Mold (MW 144)


Additional Information
Got a big batch of homemade soap ready to go? The Handmade Soap Mold Tray will make sixteen rectangle soap bars, each with the word "Handmade" stamped across the top with a floral border.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Tray
Avg. Bar Weight: 5.75 oz Bar Cavities: 16
Bar Depth: 4" Bar Length: 1.375"
Bar Width: 2" Max Temperature: 145ºF
Mold Capacity (oz): 92

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold, and slice into bars. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Slice into bars. Allow soap to cure for 4-8 weeks. Note that some cp soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold. Slice into lotion bars.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (4)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 4 Question(s) Shown Below

Q Bubble
Posted By: Gail    |   August 14, 2020

"Its a little hard to be sure from the picture. Do the soaps come out with a beveled look on the tops?"

Q Bubble
Posted By: chus   |   July 13, 2014

"Hi, What can I use to cut the bars of soap perfectly? "

Q Bubble
Posted By: Suzanne   |   May 09, 2014

"what are the actual dimensions of each bar?"

Q Bubble
Posted By: Elizabeth   |   February 26, 2014

"How many pounds or ounces of batter does this mold hold?"

Recipes & Videos (0)
CustomerReviews (8)
Submit A Rating Average Customer Rating: (8 Reviews)

stacey • Michigan

Date Submitted:  06/26/2017

I Recommend This Product!
"its ok"
COMMENTS:  not sure i like the look of it
PRODUCT USED IN:   Soap - Cold Process
Julie • Virginia

Date Submitted:  01/12/2017

I Recommend This Product!
COMMENTS:  good size
PRODUCT USED IN:   Soap - Melt & Pour
• size
• graphic
LaShon • Virginia

Date Submitted:  12/17/2016

I Recommend This Product!
"Great product"
COMMENTS:  The mold was very helpful when I need a large batch already pre-lined for cutting. I like that it has handmade engraved in the mold.
PRODUCT USED IN:   Soap - Melt & Pour
Jennifer • New York

Date Submitted:  11/30/2016

I Recommend This Product!
"love it "
COMMENTS:  I love this mold, t is very easy to use. It takes only a few seconds to unmold it. It is also easy to cut the soaps once you unmold it because of the lines in between each bar.
PRODUCT USED IN:   Soap - Cold Process
Jenia • South Carolina

Date Submitted:  11/08/2016

"Nice but needs to be silicone"
COMMENTS:  Beautiful but needs to be offered in silicone. Extremely hard unmolding if u do not grease beforehand ! Needs to be more flexible plastic!
PRODUCT USED IN:   Soap - Hot Process
• Pretty & cheap
• Make more sturdy
• Make a silicone mold of it
Tisa • Ohio

Date Submitted:  05/03/2016

"Huge! "
COMMENTS:  Whoa. This mold is huge. If you want big chucky bars of soap this is the mold for you. I was not expecting it to be so big and deep. Prepare to have alot of melt and pour ready to fill it. I used it in a Gardener's Soap and Layered it. Turned out great. Not sure how often I will use this as it takes up alot of soap.
PRODUCT USED IN:   Soap - Melt & Pour
Reva • Arizona

Date Submitted:  11/02/2014

I Recommend This Product!
"The Best Ever!"
COMMENTS:  My customers love the size of this bar. I overpour them and usually can get them close to 6 ounces which is awesome and more bang for their buck. I wish they sold this same size Goats Milk version.
PRODUCT USED IN:   Soap - Melt & Pour
Gables Apartment • Florida

Date Submitted:  07/29/2014

I Recommend This Product!
"Very cute bars."
COMMENTS:  You can make them thick or thin depending on the size bar that you want. I used gloves to shower so when I rubbed this bar of soap against the front part of it, the Handmade and accents disappeared altogether - which is fine, it was bound to go away anyways. Easy to pop out, which I liked.
PRODUCT USED IN:   Soap - Melt & Pour
• Huge!
Customer Photos (0)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved