Milky Way™ Hemp Oil Soap Mold (MW 406) - Wholesale Supplies Plus
 
Current Processing Times: 1-2 Business Days
 
 
Wholesale Supplies Plus
 
   
 
 
 
Soap Molds Plastic & Silicone Molds Cannabis, CBD & Hemp - (You Are Here - P11034)

Milky Way™ Hemp Oil Soap Mold (MW 406)

Pricing




** Ships UPS Ground Only.



Additional Information
This round soap mold displays hemp with its jagged leaves and the words 'HEMP OIL' in capital block letters. Commonly used for melt and pour soap made with hemp soap bases or cold process soap made with hemp seed oil or hemp seed butter blend.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 4.8 oz Bar Cavities: 3
Bar Depth: 1 1/8" Bar Length: 3"
Bar Width: 3" Max Temperature: 135ºF

Directions & Ingredients


Directions:
Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below



Q Bubble
Posted By: Joanne   |   November 16, 2017

"Please help my tbi brain. 3 cavities = 3 bars at approx 4.5oz each?"


Recipes & Videos (0)
CustomerReviews (9)
Submit A Rating Average Customer Rating: (9 Reviews)



Charlene • Minnesota

Date Submitted:  01/03/2022

"Not recommended for Melt and Pour"
COMMENTS:  I bought this for MP soap using crafters choice. Its almost impossible to get the soap out. Tried using it for CP soap with the samp issue. Might be good for bathbombs.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Its cute
• Everything else
Eric4Hemp • Alabama

Date Submitted:  02/14/2019

I Recommend This Product!
"Love this mold"
COMMENTS:  At first it seemed a little hard to get the soap out of the mold, but firm pressure on the back and it pops right out. Love the shape. My customers love it as well.
PRODUCT USED IN:   Soap - Melt & Pour
Theresa • Tennessee

Date Submitted:  05/30/2018

I Recommend This Product!
"Very Different"
COMMENTS:  Works well
PRODUCT USED IN:   Soap - Cold Process, Bath Fizzies & Salts
cheryl • Missouri

Date Submitted:  02/23/2018

I Recommend This Product!
"Hemp oil soap"
COMMENTS:  I love this mold. Crisp and clear image and makes a nice round bar.now I need another mold I sold out of my hemp and patchouli before I got my soap to the shop.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Nice bar
• Clear image
• Make a more cavity mold
Ginger  • Kentucky

Date Submitted:  02/06/2018

I Recommend This Product!
"Hemp Mold"
COMMENTS:  Great
PRODUCT USED IN:   Soap - Melt & Pour
Joanne • Kentucky

Date Submitted:  12/07/2017

I Recommend This Product!
"Love the turn out"
COMMENTS:  I was not sure how this would be welcomed by customers. But I gave it a shot and I can't keep the soaps made with mold on the shelf. I wish I got two!!
PRODUCT USED IN:   Soap - Melt & Pour
Kathleen • Oregon

Date Submitted:  07/27/2017

I Recommend This Product!
"Perfect"
COMMENTS:  I ordered this mold to obviously make the hemp oil soap bars and it is just the right size and the detail comes out sharp & clean. The reason it received 4 stars is the bars didn't release from the mold quite as easy ad I had hoped, but upon releasing the bar was good and like I mentioned the detail was sharp.
PRODUCT USED IN:   Soap - Melt & Pour
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Detail comes out well defined
• makes good size bar approx 4.7 oz
Joanna • Pennsylvania

Date Submitted:  04/23/2017

I Recommend This Product!
"Great hemp mold"
COMMENTS:  This mold is great! I will have to order a couple more, the cavities are bigger than I expected!
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process
Sharine • Kentucky

Date Submitted:  07/08/2016

I Recommend This Product!
"Hemp Oil Mold"
COMMENTS:  Love this mold! Very detailed & easy to use.
PRODUCT USED IN:   Soap - Melt & Pour, Soap - Cold Process, Lotion Bars & Sticks
THINGS I LIKE   THINGS I'D LIKE TO CHANGE
• Highly detailed
• Cavity size
• Durability
• NOTHING
Customer Photos (1)
Charts & Calculators
 
 
Wholesale Supplies Plus LET US HELP YOU SAVINGS CENTER CONTACT US

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Coupons
Safe Sale Guarantee
Making Bulk Purchases
1-800-359-0944
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
MC-V-AMEX-Discover-PayPal
Follow Us
Careers/Job Openings

 
 

Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved