We have wholesale soap making supplies. Perfect for professional soap makers and DIY hobbyists. Aromatherapy essential oils, melt and pour soap bases, molds, cutters, colors, unscented bases, plus ingredients like shea butter, cocoa butter. Outstanding bulk discounts available.
Sample Sets
The pretty Lavender Wild Bar Soap Mold features the titular plant itself growing in the garden. Perfect for your homemade lavender soaps.
Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.
Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC Plastic (Not Approved for Food Contact)
Country of Origin: United States
Milky Way Soap Molds can tolerate temperatures of 135ºF to145ºF. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling.
Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Country Of Origin: United States
Helpful Product Information:
Material: Plastic
Style: Bar
Avg. Bar Weight: 4.25 oz
Bar Cavities: 3
Bar Depth: 1"
Bar Length: 4"
Bar Width: 2"
Max Temperature: 145ºF
Mold Capacity (oz): 12.75
This product is not on the CA Prop 65 list of toxic chemicals.
This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).
International Nomenclature of Cosmetic Ingredients (INCI): This product does need to be listed on the product ingredient label.
Common Name Ingredient Listing (FDA Approved): This product does need to be listed on the product ingredient label.
Directions: Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.
Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.
Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.
Care:
Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.
COMMENTS: I made lavender soaps in melt and pour using this mold and everyone was impressed. It was so easy to color in the flowers and leaves. I used Lavender Breeze fo and it was a hit.
PRODUCT USED IN: Soap - Melt & Pour
Darla • Kentucky
Date Submitted: 01/09/2018
I Recommend This Product!
"Like the mold"
COMMENTS: We really like the outline of this mold. It has great detail and you are able to see everything when your soap is un-molded.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• We wish it were a little shorter • Does not fit soap box properly
Diane • Missouri
Date Submitted: 07/12/2017
I Recommend This Product!
"Love this mold!"
COMMENTS: This makes a beautiful soap
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Everything
Leta • New York
Date Submitted: 07/01/2017
"Beautiful!"
COMMENTS: Such a pretty mold but after a few (6) uses it would no longer lay flat.
PRODUCT USED IN: Soap - Melt & Pour
Lucinda • Indiana
Date Submitted: 04/28/2017
I Recommend This Product!
"Lavender soap mold"
COMMENTS: I bought this for a special Lavender soap recipe I'm making. My daughters will love it and I know my customers will too!
PRODUCT USED IN: Soap - Cold Process
Edna-Mae • North Carolina
Date Submitted: 06/15/2016
"Pretty and useful"
COMMENTS: I like that it has the name on it so you don't have to label the soap's fragrance if you don't want to. Lavender flowers are beautiful and so it this mold.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• The name of the flower/scent
Irma • Virginia
Date Submitted: 04/28/2016
I Recommend This Product!
"A favorite mold ! Makes beautiful soap bars"
COMMENTS: This is a wonderful mold for making a few bars of soap at a time. The design stands out very well and the bars are a substantial size. I used glycerin soap base with lavender coloring and lavender essential oil, then touched the raised design with white pearl mica powder. Very beautiful soaps that I am proud to share ! Planning to make lots.
PRODUCT USED IN: Soap - Melt & Pour
Mary • California
Date Submitted: 12/02/2015
I Recommend This Product!
"Lavender Wild Soap Mold (MW 118)"
COMMENTS: This is the 2nd one I've ordered. The first cracked along the edge of soap cavity after so many uses. Will keep using these molds.
PRODUCT USED IN: Soap - Melt & Pour
Rachelle • Colorado
Date Submitted: 09/21/2015
I Recommend This Product!
"Nice Size"
COMMENTS: I like the design, the size, and the shape. I did have trouble getting my soap out...which is unusual for me. It may be because I did NOT water discount my recipe this time. And I did not add S.L. this time either. I'm guessing these two changes from my norm are the culprit. Milky Way molds are usually very easy to work with and this design should not be a problem. It still, even though my soap looked a bit rough...people still liked it.
PRODUCT USED IN: Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Size • Shape • Design
veronica • Texas
Date Submitted: 11/30/2014
I Recommend This Product!
"Love this mold"
COMMENTS: Great mold, very pretty. A easily release.
PRODUCT USED IN: Soap - Melt & Pour, Soap - Cold Process
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• looks • price
Linda • North Carolina
Date Submitted: 02/01/2014
I Recommend This Product!
"Makes a beautiful product"
COMMENTS: My lavender soaps look beautiful when using this mold. I've just started using it and am now getting requests for the lavender soaps using this design or mold. It makes the product very noticeable and striking. Very pleased.
PRODUCT USED IN: Soap - Melt & Pour
THINGS I LIKE
THINGS I'D LIKE TO CHANGE
• Makes beautiful soaps • Like bars that are close to 4 oz • Good quality mold which is easy to use
If you used this product to create a masterpiece of your own, please share your ideas with others.
Uploaded products can link directly to your Handmade Store so customers can purchase directly!
Plastic & Silicone Molds
Featured Collections
Retired Soap Molds
