Milky Way™ Baby Feet Soap Mold (MW 465) - Wholesale Supplies Plus
Current Processing Times: 1-2 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Baby & Young Kids - (You Are Here - P11394)

Milky Way™ Baby Feet Soap Mold (MW 465)


Additional Information
This soap mold is one of our favorite baby shower themed molds! The heart shaped mold cavities each have two tiny feet on them that can be colored blue or pink to represent a little baby boy or girl.

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 3.15 oz Bar Cavities: 3
Bar Depth: 1" Bar Length: 2.75"
Bar Width: 3" Max Temperature: 145ºF
Mold Capacity (oz): 9.45

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below

Q Bubble
Posted By: Laurie    |   November 09, 2017

"I am a beginner at this. Trying to make these beautiful baby soaps for my daughter's upcoming baby shower. I want to use the melt and pour method and add color and scent! How do I determine how much melt and pour soap to buy? I need to make about 50 of the soap - the baby feet in the heart shape mold. Thanks for your help. Oh, and how would I determine how much color to use to get a baby pink color? Thanks so much!"

Recipes & Videos (2)
CustomerReviews (6)
Submit A Rating Average Customer Rating: (6 Reviews)

Alicia • California

Date Submitted:  06/10/2021

"Not good"
COMMENTS:  I was unable to to take the soap out of the plastic mold. I'm not sure if this is only for melt and pour. I will not buy this again.

WSP Response:Hi Alicia, we are sorry you had this experience. Our plastic molds are for both CP and MP, although CP soap is a little trickier to unmold typically. Here are some tips if you'd like to try again!
PRODUCT USED IN:   Soap - Cold Process
Diana • Ohio

Date Submitted:  12/27/2018

I Recommend This Product!
COMMENTS:  Love it , but they get damaged easy. Wish they are silicon made.
PRODUCT USED IN:   Soap - Melt & Pour
• Shape
• Durability
Crystal • Missouri

Date Submitted:  01/29/2018

I Recommend This Product!
"Cute mold"
COMMENTS:  These are adorable for a baby mold and a great thickness for selling
PRODUCT USED IN:   Soap - Melt & Pour
Irma • Virginia

Date Submitted:  02/01/2017

I Recommend This Product!
"Cute little baby feet !"
COMMENTS:  Great mold makes nice sized soaps , easy to use, much easier to remove the finished soaps than most plastic molds.
PRODUCT USED IN:   Soap - Melt & Pour
Sarah • Minnesota

Date Submitted:  12/12/2016

I Recommend This Product!
COMMENTS:  Great little mold. Wasn't sure about about using plastic molds since I usually use silicone, but these popped right after a bit of time in the freezer. The soap it makes is adorable.
PRODUCT USED IN:   Soap - Cold Process
Jodi  • Maryland

Date Submitted:  11/14/2016

I Recommend This Product!
"baby feet mold"
COMMENTS:  Good quality item
PRODUCT USED IN:   Soap - Melt & Pour
• good quality
Customer Photos (0)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved