Milky Way™ Dinos Soap Mold (MW 70) - Wholesale Supplies Plus
Current Processing Times: 3-4 Business Days
Wholesale Supplies Plus
Soap Molds Plastic & Silicone Molds Baby & Young Kids - (You Are Here - P9757)

Milky Way™ Dinos Soap Mold (MW 70)


Additional Information
The trio of prehistoric creatures represented in our Dinos Soap Mold are the mighty Tyrannosaurus Rex, a Pterosaur (a.k.a. Pterodactyl), and a Stegosaurus. Perfect for dinosaur lovers or that person who saw Jurassic Park like twelve times in a row.

Makes (3) 4 - 4.25 oz. Bars

Detailed Description:
Pterodactyl: 4.25 ounces, 4.25” x 2” x 1.25”, 1 cavity
Stegosaurus: 4 ounces, 3.5” x 2.5” x 1.5”, 1 cavity
T Rex: 4.25 ounces, 4.25” x 2.25” x 1.25”, 1 cavity

Common Uses:
Melt & Pour Soap. Cold Process Soap. Lotion Bars.

Points of Interest:
Manufacturer: Milky Way Molds
Material: Clear PVC (Not Approved for Food Contact)
Country of Origin: United States

Milky Way Soap Molds can tolerate temperatures of 135-145 degrees F. Above these temperatures, warping may occur. Soap is easiest to release 12-24 hours after cooling. 

Wash molds in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.

Country Of Origin: United States

Helpful Product Information:
Material: Plastic Style: Bar
Avg. Bar Weight: 4.17 oz Bar Cavities: 3
Bar Depth: 1.25" Bar Length: 4.25"
Bar Width: 2.25" Max Temperature: 145ºF
Mold Capacity (oz): 12.5

This product is not on the CA Prop 65 list of toxic chemicals.

This product conforms to the reporting requirements of California Proposition 65 (Safe Drinking Water and Toxic Enforcement Act of 1986). We are conforming to the regulation by reporting the existence, or lack thereof, of ingredients deemed reportable by the above mentioned regulations via a Safety Data Sheet (SDS), in Section 15 "Regulatory Information." Ingredients from Natural Food Sources (NFS) and are exempt from reporting in accordance with Title 27, § 25501(a).

Directions & Ingredients
International Nomenclature of Cosmetic Ingredients (INCI):
This product does need to be listed on the product ingredient label.

Common Name Ingredient Listing (FDA Approved):
This product does need to be listed on the product ingredient label.

Melt & Pour Soap: Pour melted soap at a temperature no hotter than 135ºF into mold. Cool until soap has hardened. Remove soap from mold. For easier unmolding, place into freezer for 30 minutes, and then immerse bottom of the mold in hot water for a few moments. Do not use cooking spray to coat mold.

Cold Process Soap: Coat the mold with cooking spray. Pour soap at trace into mold. After 24 hours, flip mold over onto a clean surface. Gently push the back of the mold until the soap begins to release then pull the soap out of the mold with a gloved hand. Allow soap to cure for 4-8 weeks. Note that some CP soap recipes may require a week to harden enough to remove from the mold. If this is the case with your recipe, we recommend adding sodium lactate to your recipe to assist with creating a harder bar faster.

Lotion Bars: Pour melted lotion bar mixture into mold cavities at a temperature no hotter than 135ºF. Allow mixture to solidify. Flip mold over onto clean surface. Gently push back of mold until lotion bar begins to release then pull bar out of mold.

Wash in warm, sudsy water. Please avoid the dishwasher because that can warp your molds or make them brittle.
SDS & Documents
Questions & Answers (1)

Question + Answer. Here you can ask or answer questions All questions are queued and answered quickly during business hrs. You can also answer questions posted by other customers if you have valuable information.

Submit A Question 1 Question(s) Shown Below

Q Bubble
Posted By: Amber   |   March 29, 2019

""$4.77 for 1 Mold" -- The description isn't very clear, do these molds come in a set of three or just single pieces, and we get a random dino mold?"

Recipes & Videos (0)
CustomerReviews (4)
Submit A Rating Average Customer Rating: (4 Reviews)

Lorraine  • New York

Date Submitted:  03/30/2019

I Recommend This Product!
"Dino Soap Mold"
COMMENTS:  Such detail! These were great for children's book fair. Popped trays into freezer and soap popped out quickly after 10 minutes.
PRODUCT USED IN:   Soap - Melt & Pour
Sharon • Pennsylvania

Date Submitted:  12/08/2017

I Recommend This Product!
"Fun to make"
COMMENTS:  These dino molds have made some of my best sellers. I color the dinosaur one color, usually with a white or goats milk base and then fill the cavity with a clear base and color. Moms and kids alike really go for these. These are a little difficult to unmold and I have to place in the freezer for 15 minutes, but that "usually" does the trick. And if it doesn't I wait for my husband to come home and use his brute strength to get them out. :) I've purchased several of these because they are so popular with my customers.
PRODUCT USED IN:   Soap - Melt & Pour
• Easier to unmold
Diane • Missouri

Date Submitted:  07/12/2017

I Recommend This Product!
"Kids love it"
COMMENTS:  Kids love these soaps
PRODUCT USED IN:   Soap - Melt & Pour
• Everything
Stephanie • New York

Date Submitted:  01/12/2015

I Recommend This Product!
"Huge hit!"
COMMENTS:  Sold a ton of these soaps! Great high quality mold!
PRODUCT USED IN:   Soap - Melt & Pour
• High quality plastic
Customer Photos (1)
Charts & Calculators

Our Story
Contact Us
Frequently Asked Questions
Calculating Processing Times
Off-Shore Shipping Policy
Safe Sale Guarantee
Making Bulk Purchases
Email Us Here
Mon - Fri 8:30AM - 4:00PM EST
Sat, Sun & Holidays - Closed
We Proudly Accept:
Follow Us
Careers/Job Openings


Return Policy Privacy Policy Terms & Conditions Of Sale Website User Agreement Digital Media Takedown Policy Anti-Fraud/Bullying Policy

Copyright © 2023 Wholesale Supplies Plus, LLC - All Rights Reserved