Conversation Hearts MP Soap

Print hearts on embed paper and cut out to fit mold cavities. Link to print embed: https://www.wholesalesuppliesplus.com/pdfs/labels/Conversation-Heart-Embed-Paper.pdf

To plastic beaker, add 2 oz. cut up crystal clear soap. Heat in microwave until melted, about 30 seconds.

Pour a thin layer of soap into first cavity (about 1/8"). Lay embed paper face down into soap pushing it down so the paper is completely covered with soap. Spritz with alcohol.

Continue in this manner, pouring a thin layer of soap and placing embed paper into mold. When the melted soap has been used, melt an additional 2 oz. and finish pouring all 24 soaps. Let harden.

To a plastic beaker, add 5 ml fragrance and 2.5 ml stabilizer. Mix and let sit for at least 2 minutes.

To microwave-safe measuring cup, add 6.5 oz. of cut up white soap. Weigh the first color and add to measuring cup. Heat in microwave for 45 seconds or until just melted. Stir.

Spritz 6 soaps in mold with alcohol. When soap temperature has cooled to around 130°F, mix in fragrance mixture from Step 5. Stir well.

Fill 6 soap cavities with colored soap then spritz again with alcohol to release surface bubbles. Let harden.

Repeat above Steps 5-8 with next three colors to make 6 soaps each. Let soaps completely harden.

Remove from mold and package as desired. We recommend 4 of each color per set.

Label product accordingly.