Pet Paws MP Soap Recipe

To a plastic beaker, add 2 oz. of clear soap. Heat in microwave for approximately 10 seconds or until melted.

Add 3-4 drops of brown liquid pigment or to desired color.

Using a dropper, place colored soap in paw prints of mold. Place soap in freezer for 10 minutes. Place dropper into cup of hot water to keep soap free-flowing between uses.

To microwave-safe measuring cup, add 13.25 oz. of cut up oatmeal soap. Heat in microwave until melted. Stir to be sure soap has completely melted.

Add 0.30 oz. fragrance and mix into melted soap.

Spritz paw prints generously with rubbing alcohol. Check that the oatmeal soap temperature is at or below 130°F.

Carefully pour oatmeal soap into mold. Spritz the top of the soap with alcohol to diminish any bubbles.

Let the soap harden. After 10 minutes, place mold into freezer for 20 minutes to make unmolding easier.

Unmold soap and set aside.

Repeat above steps to make additional three soaps.

Wrap with plastic wrap to keep soaps airtight. Package in cello bag and tie with raffia, if desired.

Label product accordingly.